Well its a different kit but some of the parts are the same. The plumbing is not exact etc... and some of the wiring etc.. so if you have a S550 get a kit that is for your year so it fits.
Nice! Dropping my 5.0 off this Sunday! But I have cat less long tube headers, boss 302 intake manifold and going e85. So hopefully I get closer to 700 rwhp.
Hi if you open the description of the video it has a link to the stage 3 kit that shows current pricing. Best place to check since it changes a couple times a year.
I have the same mods on my 2011 gt. With borla exhaust and a CAI. BAMA tune as well. Im planning to get a paxton but wondering what else should I upgrade in my vehicle before installing this paxton??
If we did it in house we could make that work. But not available for mail order. We can pretty much make anything work if we have the car in our hands. email quote@brenspeed.com for an install quote. THANKS
Great vidéo concerning this Paxton 2200SL on the stage 3 was this on pump gas 93 and what is the timing set at 16 degrees or lest. Also what would be the gain on my 2017 Gen 2 engine with the auto with 3.55 gear. Thanks!
Your making 630 on a 3.8 pulley? Im running a with a boss intake and a 3.6 pulley so i should be making north of 650 depending on how good my tuning is.
Hi here I pasted the link from the description. THANKS FOR WATCHING. Check out the Brenspeed Stage 3 2011 Mustang 600+ rwhp supercharger package. Here is a link! www.brenspeed.com/bren750p.html Need an install quote? email quote@brenspeed.com
Check out the Brenspeed Stage 3 2011 Mustang 600+ rwhp supercharger package. Here is a link! www.brenspeed.com/bren750p.html Need an install quote? email quote@brenspeed.com
Awesome numbers!! Considering one for myself, I got the cobra Jet manifold and making 421rwhp, what would the estimated numbers be with this kit? Thanks and great video
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
Huge thanks to the guys at Brenspeed! Had a great drive home, did some pulls of corse will be a returning customer for sure.
THANK YOU AS WELL!
Anybody know if it’s compatible with a 14 f150 5.0?
That's awesome dude...I have a 14 Gt and I'm thinking about going Paxton
Sweet thanks for watching!
Would a 2011-14 Paxton 2200sl work on a s550 2015 gt
Well its a different kit but some of the parts are the same. The plumbing is not exact etc... and some of the wiring etc.. so if you have a S550 get a kit that is for your year so it fits.
Nice! Dropping my 5.0 off this Sunday! But I have cat less long tube headers, boss 302 intake manifold and going e85. So hopefully I get closer to 700 rwhp.
Cant wait to see it!
So what kind of numbers did you end up seeing?
thinking about buying this kit, could you change the tune to work with a 2018 mani?
Yes that is not a problem.
Did you just use a boost a pump?
Correct yes a boost a pump.
USING 47lb injectors on a paxton?!
Yes the 39lb were discontinued so all get the LU47 now
What's the cost of the stage 3? I'm trying to achieve around 650whp on my 2012 mustang 5.0
Hi if you open the description of the video it has a link to the stage 3 kit that shows current pricing. Best place to check since it changes a couple times a year.
Good job Brent those are great #'s!
Thank you!
I'm sold!! Will it still work with a Boss intake?
Yes you can make this work with the boss intake.
Got the boss coming in to get this kit shooting for 675rwhp doing 418rwhp now
Lance Vaillancourt that will be a sick build
What other upgrades are u getting before installing the paxton??
If you added a boss or cobra intake how would it effect the hp and torque
Will this kit work with my Boss intake and 85mm BBK throttle body?
Yes you can run those with this supercharger.
I have the same mods on my 2011 gt. With borla exhaust and a CAI. BAMA tune as well. Im planning to get a paxton but wondering what else should I upgrade in my vehicle before installing this paxton??
??
Would you be able to modify this kit to fit the cobra jet manifold setup on my 14? Great video like always. 🇺🇸
If we did it in house we could make that work. But not available for mail order. We can pretty much make anything work if we have the car in our hands. email quote@brenspeed.com for an install quote. THANKS
Great vidéo concerning this Paxton 2200SL on the stage 3 was this on pump gas 93 and what is the timing set at 16 degrees or lest. Also what would be the gain on my 2017 Gen 2 engine with the auto with 3.55 gear. Thanks!
Given everything you did in this video but instead of a Paxton you had a vortech v3, would the numbers be about the same?
Your making 630 on a 3.8 pulley? Im running a with a boss intake and a 3.6 pulley so i should be making north of 650 depending on how good my tuning is.
Possibly, thanks for watching!
I have a 2014 Mustang stock how much it will cost me
Hi here I pasted the link from the description. THANKS FOR WATCHING.
Check out the Brenspeed Stage 3 2011 Mustang 600+ rwhp supercharger package. Here is a link!
www.brenspeed.com/bren750p.html
Need an install quote? email quote@brenspeed.com
6k at least
How much did it cost
Check out the Brenspeed Stage 3 2011 Mustang 600+ rwhp supercharger package. Here is a link!
www.brenspeed.com/bren750p.html
Need an install quote? email quote@brenspeed.com
How much did you pay
Did you upgrade suspension?
What pulley is on it when it made 577
Awesome numbers!! Considering one for myself, I got the cobra Jet manifold and making 421rwhp, what would the estimated numbers be with this kit? Thanks and great video
If you have the same set up, but with an intake manifold you might be 10-20 more with the manifold.
Thank you. How is the low end torque?
Still good as the cars have pretty good low end stock. Boost arrives with RPM so the more RPM the more boost.