Much like you I drive a day cab delivering and loading forklifts and pallet Jacks all day , I could easily do this multiple times a day so needless to say a automated process is hands down the way to go
No way…. One simple standalone one versus needing a drill, backup rachet and socket, extra batteries.. all to save seconds. I’m not even in this industry, but that’s a no-brainer for me. Great video.
5 stars Captain Kleeman for an unprecedented and non-bias review! The testing segment was stellar and true to your style of full disclosure, including the commentary. To that, you add some "roading" footage with the mighty Mack, complete with a partial shot of the now-famous "DOT pull broom" accessory you proudly carry on the trailer. Jakes are always a hit with the savvy viewers and you did a fine audio job with those as well. Highly recommend anyone with questions about chaining heavy equipment for transport consult you as an expert user. I'm fully aware that conditions apply and my mileage may vary. Enjoy your weekend, work safe, stay warm, and pls continue your all-encompassing video adventures here. It's appreciated brother! Doug@ the "ranch"
On about 4 is one thing but when applying 8-14 binders on a load, your arms start to hurt especially when you're trying to move fast while other drivers behind you are waiting on you. They would do great in saving your arms. I'd just keep a spare drill and batteries incase one burns up or a battery dies.
Hi Captain! Thank you for the review. After reading some of the comments I thought I'd chime in on a few. The time savings can be minimal or huge depending on the load you are carrying. Steel coil trucks are saving over an hour a day for example. It is definitely easier on the body. Most of our safest drivers on the road are the most experienced but we are getting worn shoulders, elbows ect....these help a lot. Batteries going dead are really not a problem. A fully charged battery with that drill kit will last about 40 cycles. If you are going to cut wood with a chain saw, your prolly going to make sure your chain saw has a full tank. A big advantage to our binder is the ability to keep the chain tight. The handle is a reaction bar that gets placed against the floor or track, blade of the equipment being hauled. Once tight, it takes about 7 to 10 lbs of effort to lift the handle up. because of this, tire mash over bridge abutments, rail road tracks ect do not loosen our binders where normal ones will counter rotate and loosen. Also, normal binders twist the chain towards the end of the tightening stage, we do a continued, 25 to 1 gear reduced pull of the chain with out any twisting. Pure tightness. Bone tight. Thank you for the review!!
To give a little background on Speedbinders. My first model used a 1 to 1 ratio and absolutey flew...hence the speedbinder name. That version had many draw backs and I took them off the market after the invention and release of Torque Drive. So this binder is called Torque Drive, made by speedbinders.com. To me, the speed is low on the feature and benefit list. Safety, chain tension, ease of use, long life ( no flipper to get a flat spot on) are attributes that stand out. They are not for everyone and I get that. But once you use them, you won't go back. 30 day money back guarantee, 6 month warranty.
Those binders are really going to be handy as long as the grease doesn't get to stiff this winter. I just subscribe it's good to see no mirrors where hurt during the video.
I was thinking of getting a set of these. They don’t really appear to be really that much quicker in the application that you’re using them in the video. But if you were Chaining something down and could not get as much throw on the handle of the regular binder then the speed binder would be so much faster I know sometimes when I chain my equipment down I can only get a quarter turn out of it before it either hits the trailer deck or the attachment. providing you could fit the impact in there that thing would be amazing. Great video thanks for sharing.
Guess I should have paid closer attention to my spelling mistakes in my first comment, what I meant to say was... The new style of ratchet binders being faster than the old style is not a factor for my work, but being able to tie down something in a tight spot, having clean lubed up parts (i.e., threads and ratchet mechanism) is sure a plus. I am not gonna just throw the old style on the scrap heap either. For you older guys, I am an older guy myself and won't under estimate what the older style can do and has done for so many years. Love you video's Capt., as well the joint ones of you with the "dirt" man... Thank you
spelling doesn't matter on this channel! and thanks for taking the time to comment and of course watch our videos. hope your week is off to a great start!
I think in a tight spot, where you can't ratchet a regular binder, and also when the chains are long or there's something compressible like tires, they'd work awesome! When securing a tractor or car or anything with pneumatic tires, there's a lot of squish there and you ratchet forever, these would zip right thru that I'm sure faster than manual. It would, however, be pretty awesome to have a manual option other than a socket or something. Other than that, seems pretty jazzy! Thanks for the review!
@@CaptainKleeman Yeah, for sure! Looking through the comments, that seems to be a common concern. Maybe if they were just 1/2" square drive (so no socket needed) and came with a piece of 1/2" key/square clipped to the side for manual operation... Well, there goes my commission.... Maybe they'll just send me a set for my brilliant upgrade idea?
They should call these labor saver binders. Speed is minimal. Although you didn't show stuff in the way that can hamper the handle swing. Good review. Thanks Captain. Cheers!
If I hauled a lot maybe, but for what I do, and what you just showed I think a regular ratchet binder is my best option. I live in Florida so salt and snow isn’t a problem for me. That and the price difference is a turn off as well.
Great vid,it’s like a flip phone vs a I phone. Speed binders all the way baby. Especially if you’re moving equipment regularly. Let’s move out of the dark ages, and see the light 😂. Fire pit vs microwave. Horse and wagon or diesel truck. Mountain Dew or water.
Off a few seconds on the speed binder times lol but whats even more better is the life time of your body that these things will give you. Work smart not hard! I just ordered 4 speed ones. Looking forward to them
Realistically, the time savings isn't that big of a deal. Where these things shine is avoiding tendinitis in the elbows or other sorts of repetitive use injuries if a person has to use binders multiple times per day. We only have one body. Destroying it for work isn't an option for me. I love these things.
Speed of work progression isn't why you should consider speed binders. The main thing going for these speed binders is that they're energy savers. And that can be huge in summer and winter. Conserving your energy with binding 10-12 chains on a 90k load of coil can sap you real good... and then you got to put in 8-10hrs of driving. You already gotta lift chains and stuff. Anything that can save your energy output in the field has to be given a looksey.
Nice video, These are going to provide a more consistent tightening of the binders regardless of the actual operators fatigue level. I’m surprised that they didn’t offer a manual operation mode, something the manufacturer may want to investigate. Mike may want to throw a spare air powered tool on the truck if it’s supply is adequate to power one as a backup To the drill. That and throw the old binders in a bucket of used engine oil so they don’t become solid in case he ever has to go back to them. Take care, be safe operating that new truck. Is it electric, pedal, or Flintstoned powered.
I’m not sure I ever had a regular binder work as good as yours! I ordered 3 speed binders for myself. I imagine after the first use I’ll say how did I make it without them!
I for one keep my tool box on my trailer organized so all it takes to find the impact is open my box and it’s right there ready to go, so if your not organized I’d say maybe this isn’t for you ! But most of the drivers I know are very organized and know where there tools are even in the dark!
I spend a lot of time cleaning and maintaining my ratchet binders. It’s definitely not fun on cold or rainy days trying to get a stuck binder to work. I’ve got to check out those speed binders.
Stück binder? Grease in the summer, PB blaster in the winter, even better, a spray bottle with ATF and Diesel fuel sprayed on periodically. No excuse for rusted or stuck binders except piss poor maintenance
thanks man! pretty excited for the promotion haha. and i'm not trying to sell anyone, just sharing my experience with them is all. people have to use what works best for them!
I never pegged you as the type of person to run a stop sign Captain Kleeman. The speed binder would be even better if the fail safe to a dead battery was that it could be operated like a standard ratchet binder, which is exactly what I thought since it still has the handle but I guess the handle is only to prevent rotation as it tightens down.
I bought 6 speed binders 2 weeks ago in my opinion straight up JUNK! You can’t get enough torque from a cordless drill as I have in my own strength. With the speed binders my chains have typically gotten loose within 5 miles of driving and my old school ratchet binders I can drive 500 miles without them getting loose.
Grease the grease zirk liberally, lubricate the threaded end links with silicone spray and use a drill with at least 800 inch lbs of torque ...."let her eat" pull the drill down in first gear and they will be tighter and stay tighter than any ratchet binder.
So it gives you an extra 2 seconds to drink coffee or Mr Dirt Perfect to drink more Pepsi. The old style will keep your arms in shape the new ones keep your stomach filled with food or drink.
I can see one place that the speed binders will be nice is if your in a tight space under or beside something that you cant get a full swing with the handle on the old binders
@@DIRT-BOSS Gotcha! I ordered a set and I really like 'em. We'll see how they hold up to New Englands' weather....Enjoy your weekend! Doug@ the "ranch"
@Excavator_Farmer I really don't think it's less work either.. by the time you get to drill out put the drill back..it only shaved a couple seconds off the timer.. The real issue is how does it lock we know the mechanicals are locked and they can't come loose but if something breaks inside those speed binders.. goodnight Irene!
@@CaptainKleeman but cost some people cause they don’t got a drill but in my opinion I just like the hand ratchet better. Some people different opinion
Do you feel the speed binders torque down plenty tight enough with the drill compared to standard binders? I’m strongly considering purchasing some of these.
yeah, they really do tighten down well. And i have to say that when i stop an check my chains, i find myself adjusting these a lot less than i did with the ratchet binders. our back county gravel roads vibrate the crap out of our loads, and these stay tight.
You should have me do that with the regular binder when I do it for 30 minutes because the chain breaks loose and then I have to start over and then you have to rewind another chain Breaks Loose again and like I said it can take me 30 minutes sometime
I'm all for a better product. Unfortunately I don't think this is a win for me. The handle on the old binder doesn't die. Adding a inverter, and power tools in the trucks that require binder use is a unnecessary expense. Thanks for the review. Just offering my opinion.
Does the grease fitting actually grease the the screws or just the gears in the head. To me that just looks like a slack adjuster with a couple modifications and a pipe welded into it. Can you use it manually without the 14mm socket driving the head like a regular binder or do you always have to have to use the 14mm bolt.
You should check out the "self" binder. I bought a set of them and prefer them to the speedbinder. And you use a 1/2" impact, not a drill. I think they are better built and will last longer too.
They aren't durable. After a year self binders started breaking after 9 months. Also self didn't want to warranty them at first but they did eventually send out replacements, but it took 2 months
@@mikesch7672 maybe they were made better 4 years ago. I work for Sunbelt rentals so they don't have a gentle life. I also am very meticulous and take care of my equipment and greased them weekly. They just can't keep up. I literally had the first one fail 6.months in, they replaced it quickly. 3 months later I had one a week almost start failing like clock work. I really hoped they would work because they are great in tight situations due to lack of a handle. After all the failures I had, we decided to try these speed binders. I just started using them last week and so far I am impressed. Haven't had a single issue with loosening yet and they seem to be built like a tank. SELF is a awesome concept and probably great if you don't move as much equipment as we do.
I am a lead driver/ trainer in my district and am the tester for some of the products like this to see how they work. If they seem worthwhile, my district manager wants to order them for all the stores which is over 30 trucks. I move a lot of equipment so I need durable and efficient.
Reel McCoy I got some regular ratchet binders from rural king for $30 a piece. 5/16-3/8 grade 70 with 5200lb load o think. The same thing in a speed binder is $75. So as much as I want to get speedbinders. From what he just showed. I think I’ll stick with a regular ratchet binder.
yeah, they are more expensive, but i'm fairly positive they will pay for themselves over time. this winter will be the real test for us, that seems to been when the ratchet binders give us the biggest trouble. thanks for watching!
Whys it have handle i thought they could be used manually when I first saw this I could see that being a huge pain in ass oh the drill is in the other truck guess were going back
they are more expensive than regular binders, but i think the overall operation cost is probably less, time save, amount of cans of penetrating oil i go through, amount of time i have to reset the go pro to get a good shot of chaining down because the ratchet binder was seized in shot one...things like that
Speed between the is not an issue in my mind. The issues of tight places, cleaner thread area is the "gift" on this item. Will it rachet like a regular rachet binder or are you dependent on the drill or 3/8 rachet? Love all you and "dirty" videos... For you die hards of the order style ratcheting styles, I won't scoff at you. I am an "old guy" too and won't necessarily just cast those old binders in the scrape pile.
dependent on the but drive. and we will still keep regular ratchet binders on the trailer as well. for normal loads we can use our speed binders, but every now and again we will haul something odd ball that needs more binders. thanks for watching!
Great video. So what happens when the battery dies, or I forgot to bring the driver, lastly I've lost the socket . I see to many opportunities for something to go wrong. Just sayin'. Not discouraging anyone from buying the binders. I just know why I don't use or own many battery powered tools for the above reasons. Stay safe.
well if both our batteries die, and we have somehow managed to leave behind our socket and wrench kit we keep on the truck for on the road repairs, and i have left my personal bag i carry that i keep a pipe wrench, channel locks, and vice grips in....we are having a bad day! hahaha, but when that day happens I'll get it on video for you! hahaha. thanks for sharing you input and hope you're having a good weekend!
Captain,I hauled paving equip with an Autocar & a drop deck trailer.Worked construction from the age of 16, and retired at age 55 after I lost a leg in a MC accident, and could not get in & out of the trucks.I was also a call firefighter!
One point you missed... Masculinity! Those ratchet binders are Farmall red. They clash with my Kubota orange. Looks like I have no sense of style at all. (That spells ‘He-man’ all the way.). And when I work up a sweat tugging on them to tension the chain... well, that just smells totally Alpha Male. But, all is not lost yet. The Black paint on the Speed Binder is so much more manly. About color clash, lets face it, even Hulk screws up and color coordinates every once and a while! And, I still have the sweat option... all I have to do is use a socket and ratchet!!! All in all... I have to say that color is probably a wash... and, I can always exhibit my manliness best by picking up the Speed Binders when I have a perfectly good set of Ratchet Binders... because we all know that nothing speaks of Macho-Manliness like adding four new BoyToys to my collection!!! Thanks Cap’n for your thorough review... gotta go update my Christmas list before Mrs Clause finishes her shopping.
Doesn't really save that much time and you have to carry extra tools, but I suppose there's a purpose somewhere. I'll stick to my old school binders. Thanks for the video, I really enjoy them. Great sounding Mack!!
Randall Wescoat that Mack sounds good! Thanks for watching and thanks for being respectful! Can be rare on RUclips these days. Hope you’re having a good weekend!
@@CaptainKleeman you have a great weekend also. They're a neat concept, I'm just old school on lots of things I guess. I try to keep my binders lubed up and clean, but you understand the salt and crap as I do. I live in the wrong climate...lol.
I don’t see it so much about speed. I mean who’s out here chaining loads down like you are in nascar changing tires. It’s more about convenience. Making your work easier. Work smarter. Not harder I guess is the analogy. But to each your own. Do what you like best.
Let’s adjust the camera moves it exactly where it was it takes exactly the same amount of time as a normal one cost 6 times as much also if your rub rails are not rated for 9100 pounds then there is no point in owning one
Been using them for over a year. Love them, in fact he bought them for all three trailers. and your data is off just a bit there bud. Hope your evening is a good one!
They are cute. But ill keep my breakovers, throw it on the ground pull it through the salt and it still works everytime. And faster than either of those
I really like the idea of the speed binders but my thing is with them that's another drill more crap I have to worry with in the truck and more stuff for people to lose awesome video though
Looks like it's really a personal decision on which binder to use. If the difference in time was greater and you avoided busted knuckles,,,, it would be a no brainer.
i'm curious to see how they do through the winter, that seems to be when we have the most trouble with the ratchet binders. i'll be sure to post updates.
Dude love you and Mike's vids.. But on this one I think I'd have to disagree with ya...Seems like too much extra work...Some things are already as good as it gets even if we have been using it for years...Keep up the great vids!
Strictly speaking you have to include the time it takes (call it effort ) to plug your Battery into the the charger (omit the charging time) remove it from the Charger and get the Drill on site. As you measuring "effort"and time here, you'r behind with your Drill. Nice Video
Aside from the fact that it really isn't that much faster, the price difference and the fact that you need a cordless drill to use one just doesn't seem like this product would be worthwhile to own.
No worries! They aren't for everyone. We've used them for two years now and they are absolute time savers with the right setup, especially since I haul several trips a day. But probably wouldn't make sense for your lawn mower.
Not every one is going to carry a battery drill around with them to tighten the binder so the ordinary old binder really shines out then, sure they do make it easy but you haven’t got that feel when it’s tight it’s a bit of a guess how tight they are, yet with the ratchet type you know how tight they are , and are quicker to attach from the start you don’t have to go look for a drill check the battery charge then start by the time you do all that you would have the ratchet one on and tight but either way each to there own
i understand everyone might not like them. and to that i have to agree with you...to each their own. haha. hey thanks for watching and hope your week is off to a great start!
Much like you I drive a day cab delivering and loading forklifts and pallet Jacks all day , I could easily do this multiple times a day so needless to say a automated process is hands down the way to go
No way…. One simple standalone one versus needing a drill, backup rachet and socket, extra batteries.. all to save seconds. I’m not even in this industry, but that’s a no-brainer for me. Great video.
It's not just about saving seconds. It's wear and tear on the operator, but like you said, you aren't in the industry
Anything that prevents busted knuckles and arm fatigue has got to be an improvement. Have a blessed and safe week.
you do the same! thanks.
5 stars Captain Kleeman for an unprecedented and non-bias review! The testing segment was stellar and true to your style of full disclosure, including the commentary. To that, you add some "roading" footage with the mighty Mack, complete with a partial shot of the now-famous "DOT pull broom" accessory you proudly carry on the trailer. Jakes are always a hit with the savvy viewers and you did a fine audio job with those as well. Highly recommend anyone with questions about chaining heavy equipment for transport consult you as an expert user. I'm fully aware that conditions apply and my mileage may vary. Enjoy your weekend, work safe, stay warm, and pls continue your all-encompassing video adventures here. It's appreciated brother!
Doug@ the "ranch"
you always have the best comments doug! can't thank you enough. hope your weekend is going well sir!
On about 4 is one thing but when applying 8-14 binders on a load, your arms start to hurt especially when you're trying to move fast while other drivers behind you are waiting on you. They would do great in saving your arms. I'd just keep a spare drill and batteries incase one burns up or a battery dies.
Hi Captain! Thank you for the review. After reading some of the comments I thought I'd chime in on a few. The time savings can be minimal or huge depending on the load you are carrying. Steel coil trucks are saving over an hour a day for example. It is definitely easier on the body. Most of our safest drivers on the road are the most experienced but we are getting worn shoulders, elbows ect....these help a lot. Batteries going dead are really not a problem. A fully charged battery with that drill kit will last about 40 cycles. If you are going to cut wood with a chain saw, your prolly going to make sure your chain saw has a full tank. A big advantage to our binder is the ability to keep the chain tight. The handle is a reaction bar that gets placed against the floor or track, blade of the equipment being hauled. Once tight, it takes about 7 to 10 lbs of effort to lift the handle up. because of this, tire mash over bridge abutments, rail road tracks ect do not loosen our binders where normal ones will counter rotate and loosen. Also, normal binders twist the chain towards the end of the tightening stage, we do a continued, 25 to 1 gear reduced pull of the chain with out any twisting. Pure tightness. Bone tight. Thank you for the review!!
some more great points steve! we are really happy with them far, now complaints here!
To give a little background on Speedbinders. My first model used a 1 to 1 ratio and absolutey flew...hence the speedbinder name. That version had many draw backs and I took them off the market after the invention and release of Torque Drive. So this binder is called Torque Drive, made by speedbinders.com. To me, the speed is low on the feature and benefit list. Safety, chain tension, ease of use, long life ( no flipper to get a flat spot on) are attributes that stand out. They are not for everyone and I get that. But once you use them, you won't go back. 30 day money back guarantee, 6 month warranty.
steve helline thanks for the insight. Love the innovation as much as the safety and practicality of your product!
Those binders are really going to be handy as long as the grease doesn't get to stiff this winter. I just subscribe it's good to see no mirrors where hurt during the video.
I like the trusty easy ratchet binder. Just seems like a better idea all around! But to each their own on whatever. As long as all options are safe. 👌
I was thinking of getting a set of these. They don’t really appear to be really that much quicker in the application that you’re using them in the video. But if you were Chaining something down and could not get as much throw on the handle of the regular binder then the speed binder would be so much faster I know sometimes when I chain my equipment down I can only get a quarter turn out of it before it either hits the trailer deck or the attachment. providing you could fit the impact in there that thing would be amazing. Great video thanks for sharing.
Love that new speed binder for sure! Good video showing the two binders.
thank you sir!
Guess I should have paid closer attention to my spelling mistakes in my first comment, what I meant to say was...
The new style of ratchet binders being faster than the old style is not a factor for my work, but being able to tie down something in a tight spot, having clean lubed up parts (i.e., threads and ratchet mechanism) is sure a plus.
I am not gonna just throw the old style on the scrap heap either.
For you older guys, I am an older guy myself and won't under estimate what the older style can do and has done for so many years.
Love you video's Capt., as well the joint ones of you with the "dirt" man...
Thank you
spelling doesn't matter on this channel! and thanks for taking the time to comment and of course watch our videos. hope your week is off to a great start!
I think in a tight spot, where you can't ratchet a regular binder, and also when the chains are long or there's something compressible like tires, they'd work awesome! When securing a tractor or car or anything with pneumatic tires, there's a lot of squish there and you ratchet forever, these would zip right thru that I'm sure faster than manual. It would, however, be pretty awesome to have a manual option other than a socket or something. Other than that, seems pretty jazzy! Thanks for the review!
i agree with all of that wes! be curious to see how they develop over the upcoming years.
@@CaptainKleeman Yeah, for sure! Looking through the comments, that seems to be a common concern. Maybe if they were just 1/2" square drive (so no socket needed) and came with a piece of 1/2" key/square clipped to the side for manual operation... Well, there goes my commission.... Maybe they'll just send me a set for my brilliant upgrade idea?
I will stick with my ratcheting binders.
They work every time
They should call these labor saver binders. Speed is minimal. Although you didn't show stuff in the way that can hamper the handle swing. Good review. Thanks Captain. Cheers!
absolutely! and i think the most time it saves is the overall maintenance of the binders. hey hope youre weekend is going well buddy!
@@CaptainKleeman Merry Christmas and Happy New Year to the content creator's and family in your circle. CHEERS!
If I hauled a lot maybe, but for what I do, and what you just showed I think a regular ratchet binder is my best option. I live in Florida so salt and snow isn’t a problem for me. That and the price difference is a turn off as well.
thats a good point about being in FL. alot less freezing issues to deal with there! may be a little jealous of you this time of year haha
Captain Kleeman I don’t know, it’s 32 at 4 in the morning then 80 by noon. All the seasons in one day.
Esp since the ratchet binder actually came off in 13 seconds, which was faster than the "speed" one....lol
Having a second person to do the time would be more accurate. The puppy dog exhaust never gets old!
Great vid,it’s like a flip phone vs a I phone. Speed binders all the way baby. Especially if you’re moving equipment regularly. Let’s move out of the dark ages, and see the light 😂. Fire pit vs microwave. Horse and wagon or diesel truck. Mountain Dew or water.
I liked the concept of the soeedbinders but one thing that wasn't mentioned was the price difference between the two .Good video.
thats true, dirt perfect is going to do a video as well, he will probably bring up price point and a couple learning curves i forgot to mention
90-100 each
Speed is not the test for this. It’s the effort required to extend and retract the binders. For those out of shape like me it means everything.
Excellent point
Yeah your out of shape so get something that helps you ya know....stay out of shape
Off a few seconds on the speed binder times lol but whats even more better is the life time of your body that these things will give you. Work smart not hard! I just ordered 4 speed ones. Looking forward to them
Sslap Shots awesome! We are still using ours and love them.
Good video again I love the way that Mack sounds especially when you hit The Jake break good job be safe on the road
Realistically, the time savings isn't that big of a deal. Where these things shine is avoiding tendinitis in the elbows or other sorts of repetitive use injuries if a person has to use binders multiple times per day. We only have one body. Destroying it for work isn't an option for me. I love these things.
Agree
Speed of work progression isn't why you should consider speed binders. The main thing going for these speed binders is that they're energy savers. And that can be huge in summer and winter. Conserving your energy with binding 10-12 chains on a 90k load of coil can sap you real good... and then you got to put in 8-10hrs of driving.
You already gotta lift chains and stuff. Anything that can save your energy output in the field has to be given a looksey.
Nice video, These are going to provide a more consistent tightening of the binders regardless of the actual operators fatigue level. I’m surprised that they didn’t offer a manual operation mode, something the manufacturer may want to investigate. Mike may want to throw a spare air powered tool on the truck if it’s supply is adequate to power one as a backup To the drill. That and throw the old binders in a bucket of used engine oil so they don’t become solid in case he ever has to go back to them. Take care, be safe operating that new truck. Is it electric, pedal, or Flintstoned powered.
thats a great idea about an air driver!
the new ride is supposed to be electric, but currently flintstoned powered haha
I’m not sure I ever had a regular binder work as good as yours! I ordered 3 speed binders for myself. I imagine after the first use I’ll say how did I make it without them!
And 15 minutes to find the impact and 14mm
We have been running this for six months. Take the time to get it set up right in the first place and a fella won’t have any problems.
I for one keep my tool box on my trailer organized so all it takes to find the impact is open my box and it’s right there ready to go, so if your not organized I’d say maybe this isn’t for you ! But most of the drivers I know are very organized and know where there tools are even in the dark!
I spend a lot of time cleaning and maintaining my ratchet binders. It’s definitely not fun on cold or rainy days trying to get a stuck binder to work. I’ve got to check out those speed binders.
i think that's where the time savings is at, the overall maintenance of the binder.
Stück binder? Grease in the summer, PB blaster in the winter, even better, a spray bottle with ATF and Diesel fuel sprayed on periodically. No excuse for rusted or stuck binders except piss poor maintenance
I use a SELF load binder (It works like the speed binder), however we use a 24 volt impact and seems to be even faster especially taking them off
Like your new dump truck 😂 But i don't think you can sell me on those blinders 😁 good vidja !!
thanks man! pretty excited for the promotion haha. and i'm not trying to sell anyone, just sharing my experience with them is all. people have to use what works best for them!
Thanks for doing the review captain
I can’t wait to see the boat that you will be towing with your new truck.
hahaha, that would be an awesome thumbnail pic!
Are the lever arms made from brake slack adjusters?
Very similar
What about the old 1second binders? Those work good too
They never stay tight on tracked equipment. Good for rubber tire loads though
Great video review. Is the only option the socket wrench as a backup? Does the lever not do anything?
Correct. The lever is just there as a reaction bar.
But still one variable the tension you put the old school at. But still like the speed binder
I never pegged you as the type of person to run a stop sign Captain Kleeman.
The speed binder would be even better if the fail safe to a dead battery was that it could be operated like a standard ratchet binder, which is exactly what I thought since it still has the handle but I guess the handle is only to prevent rotation as it tightens down.
He thought he was in the fire truck.
hey hey hey, that was a slow roll at best.
and yeah, it would be nice if the handle actual functioned. i don't disagree with that.
@@CaptainKleeman We call it a California stop.
That was my thoughts also, I would always be forgetting batteries or the drill. Being prepared would be a necessity this setup
When you let it all the way out, does it have a stop? Or do the ends fall out like the ratchet binders?
I bought 6 speed binders 2 weeks ago in my opinion straight up JUNK! You can’t get enough torque from a cordless drill as I have in my own strength. With the speed binders my chains have typically gotten loose within 5 miles of driving and my old school ratchet binders I can drive 500 miles without them getting loose.
Grease the grease zirk liberally, lubricate the threaded end links with silicone spray and use a drill with at least 800 inch lbs of torque ...."let her eat" pull the drill down in first gear and they will be tighter and stay tighter than any ratchet binder.
I like speed binders a lot better l always hated them other binder great video captain kleeman
hey thanks for watching Richard!
So it gives you an extra 2 seconds to drink coffee or Mr Dirt Perfect to drink more Pepsi. The old style will keep your arms in shape the new ones keep your stomach filled with food or drink.
ahhhh, they gonna make me fat what you're saying? this will have to be a long trial period! hahaha.
After watching DP going over use of speed binders with Steve - Capt should watch it too- the short side has to go one way as per Steve
That truck always sounds nice
thank you!
Awesome video captain thanks for sharing
and thank you for watching!
Since the mighty mack has a air hose real if a battery dies on the the cordless drill you could have a air drill for back up
solid idea!
I can see one place that the speed binders will be nice is if your in a tight space under or beside something that you cant get a full swing with the handle on the old binders
thats exactly right! for us it is when we chain down the 850, getting under the blade is a pain in the butt and this helps make it a little nicer.
Does the speedbinder not work like a regular binder if the drill goes dead ? The only way it works is by turning the bolt ?
thats correct, the handle is just to keep it from rotating.
Good review! I'm not sold yet tho! Keep on trucking Diver! 👍
Readily available on the website, link in the description.
@@lakesideranch I understand that..I was just saying I'm not sold on the ratchet yet! 👍
@@DIRT-BOSS Gotcha! I ordered a set and I really like 'em. We'll see how they hold up to New Englands' weather....Enjoy your weekend!
Doug@ the "ranch"
@@lakesideranch got ya bud thats my issue up here in upstate NY salt grime.. those seals could only last so long.
Take care
@Excavator_Farmer I really don't think it's less work either.. by the time you get to drill out put the drill back..it only shaved a couple seconds off the timer..
The real issue is how does it lock we know the mechanicals are locked and they can't come loose but if something breaks inside those speed binders.. goodnight Irene!
Regular ratchet binder it better cause u gonna need a good strong drill for that drill binder
Been using it for two years now, regular 20v DeWalt does great
@@CaptainKleeman but cost some people cause they don’t got a drill but in my opinion I just like the hand ratchet better. Some people different opinion
@@TallAsian_2024 absolutely
Do you feel the speed binders torque down plenty tight enough with the drill compared to standard binders? I’m strongly considering purchasing some of these.
K&H Tractors yes getting them tight is not a issue
@@DirtPerfect sounds good! Thank you!
yeah, they really do tighten down well. And i have to say that when i stop an check my chains, i find myself adjusting these a lot less than i did with the ratchet binders. our back county gravel roads vibrate the crap out of our loads, and these stay tight.
@@CaptainKleeman I’m planning to order some, I looked them up today. Thanks for this video!
You should have me do that with the regular binder when I do it for 30 minutes because the chain breaks loose and then I have to start over and then you have to rewind another chain Breaks Loose again and like I said it can take me 30 minutes sometime
I'm all for a better product. Unfortunately I don't think this is a win for me. The handle on the old binder doesn't die. Adding a inverter, and power tools in the trucks that require binder use is a unnecessary expense. Thanks for the review. Just offering my opinion.
hey and i appreciate your opinion! thanks for watching buddy.
@@CaptainKleeman absolutely, I enjoy your videos!
Dewalt makes a 12v charger, no inverter needed
@@scraphaulin there again, more stuff to do a simple job. People get to involved to do a simple job.
Does the grease fitting actually grease the the screws or just the gears in the head.
To me that just looks like a slack adjuster with a couple modifications and a pipe welded into it.
Can you use it manually without the 14mm socket driving the head like a regular binder or do you always have to have to use the 14mm bolt.
it seems to grease the whole "screw" if that makes sense. and you're right, it is similar looking to a slack adjuster. thats an interesting point.
It greases the worm / slave gear assembly. I like to use fluid film for the end links.
Have a good Holiday keep up the good work
you do the same! thanks
Questions for you? Do you drive the fire truck? And how many mirrors dose it have left? Lol just playing. You be safe iron lung
Love them stacks sounds great looks great too
its a sharp rig for sure!
You should check out the "self" binder. I bought a set of them and prefer them to the speedbinder. And you use a 1/2" impact, not a drill. I think they are better built and will last longer too.
They aren't durable. After a year self binders started breaking after 9 months. Also self didn't want to warranty them at first but they did eventually send out replacements, but it took 2 months
@Joseph F I've had these for almost 4 years now and use them nearly every day. Sorry you don't like them, but I stand by my comments.
@@mikesch7672 maybe they were made better 4 years ago. I work for Sunbelt rentals so they don't have a gentle life. I also am very meticulous and take care of my equipment and greased them weekly. They just can't keep up.
I literally had the first one fail 6.months in, they replaced it quickly. 3 months later I had one a week almost start failing like clock work. I really hoped they would work because they are great in tight situations due to lack of a handle. After all the failures I had, we decided to try these speed binders. I just started using them last week and so far I am impressed. Haven't had a single issue with loosening yet and they seem to be built like a tank. SELF is a awesome concept and probably great if you don't move as much equipment as we do.
I am a lead driver/ trainer in my district and am the tester for some of the products like this to see how they work. If they seem worthwhile, my district manager wants to order them for all the stores which is over 30 trucks.
I move a lot of equipment so I need durable and efficient.
See if SpeedBinder will sponsor the trailer jack adapter.
I'd be more inclined to buy that.
hey i've seen that! that would be super handy!
I'll stick with my snap binders.
Good deal!
I think the best feature is you not having to put your hands in harms way
Excellent point
I noticed dirt perfect uses an impact wrench to fasten his, isnt there a chance that can bust the threads up? I noticed you use a drill for yours
Rino Mei I switch back and forth. Speed binders said it would be okay with the impact
What is the difference in pull force?
Where are these made?
Ok so its just a little bit faster ...a couple of seconds don't mean much ...what if the battery dies out on the drill??
How do they compare price wise?
Reel McCoy I got some regular ratchet binders from rural king for $30 a piece. 5/16-3/8 grade 70 with 5200lb load o think. The same thing in a speed binder is $75. So as much as I want to get speedbinders. From what he just showed. I think I’ll stick with a regular ratchet binder.
yeah, they are more expensive, but i'm fairly positive they will pay for themselves over time. this winter will be the real test for us, that seems to been when the ratchet binders give us the biggest trouble. thanks for watching!
convenience is worth a whole lot.
Whys it have handle i thought they could be used manually when I first saw this I could see that being a huge pain in ass oh the drill is in the other truck guess were going back
Speed is nice. Now what's the weight difference in the two? Cause as someone who pulls open deck trailers weight can become a issue
john that is a good questions and a great point. they do feel a little heavier, but i'm not sure on the exact weight. something i need to look into!
Great sounding truck and going to buy speed binders
that truck does sound good! thanks for watching
Got stand ratchet binders and 2 quick binders. These may be a good improvement
The big thing is saving the wrists,over time on and off with binders all day. I can see how it would burn out a persons wrists.
Nice video buddy if I paid what Mike did for those I might get me a set 😁
they are more expensive than regular binders, but i think the overall operation cost is probably less, time save, amount of cans of penetrating oil i go through, amount of time i have to reset the go pro to get a good shot of chaining down because the ratchet binder was seized in shot one...things like that
Price points?.
Load bearing?
Durability?
Tension force measure ?
Ryobi vs dewalt drill?
Impact vs drill
Milwaukee vs dewalt vs ryobi vs mikita ???
Are you using a pure sine wave inverter?
Speed between the is not an issue in my mind. The issues of tight places, cleaner thread area is the "gift" on this item. Will it rachet like a regular rachet binder or are you dependent on the drill or 3/8 rachet?
Love all you and "dirty" videos...
For you die hards of the order style ratcheting styles, I won't scoff at you. I am an "old guy" too and won't necessarily just cast those old binders in the scrape pile.
dependent on the but drive. and we will still keep regular ratchet binders on the trailer as well. for normal loads we can use our speed binders, but every now and again we will haul something odd ball that needs more binders. thanks for watching!
Great video. So what happens when the battery dies, or I forgot to bring the driver, lastly I've lost the socket .
I see to many opportunities for something to go wrong.
Just sayin'. Not discouraging anyone from buying the binders. I just know why I don't use or own many battery powered tools for the above reasons.
Stay safe.
well if both our batteries die, and we have somehow managed to leave behind our socket and wrench kit we keep on the truck for on the road repairs, and i have left my personal bag i carry that i keep a pipe wrench, channel locks, and vice grips in....we are having a bad day! hahaha, but when that day happens I'll get it on video for you! hahaha. thanks for sharing you input and hope you're having a good weekend!
I was gonna say its gonna take a lot of being unprepared to get that screwed
Uhh, no it's called having help. That's usually when things go wrong.
So what would the handle be for?
I wish that they were around back when I was hauling equip !!
what kind of rig did you have tony?
Captain,I hauled paving equip with an Autocar & a drop deck trailer.Worked construction from the age of 16, and retired at age 55 after I lost a leg in a MC accident, and could not get in & out of the trucks.I was also a call firefighter!
Which drill is that
One point you missed... Masculinity!
Those ratchet binders are Farmall red. They clash with my Kubota orange. Looks like I have no sense of style at all. (That spells ‘He-man’ all the way.). And when I work up a sweat tugging on them to tension the chain... well, that just smells totally Alpha Male. But, all is not lost yet.
The Black paint on the Speed Binder is so much more manly. About color clash, lets face it, even Hulk screws up and color coordinates every once and a while! And, I still have the sweat option... all I have to do is use a socket and ratchet!!!
All in all... I have to say that color is probably a wash... and, I can always exhibit my manliness best by picking up the Speed Binders when I have a perfectly good set of Ratchet Binders... because we all know that nothing speaks of Macho-Manliness like adding four new BoyToys to my collection!!!
Thanks Cap’n for your thorough review... gotta go update my Christmas list before Mrs Clause finishes her shopping.
how do you come up with such clever comments? always impressed sir. thanks for watching!
Captain Kleeman My wife says it has something to do with whether or not I’m off my meds... 🙃
What is the difference in length shortest to longest? Definitely cool.
i'm not sure, something i need to check on
Doesn't really save that much time and you have to carry extra tools, but I suppose there's a purpose somewhere. I'll stick to my old school binders. Thanks for the video, I really enjoy them. Great sounding Mack!!
Randall Wescoat that Mack sounds good! Thanks for watching and thanks for being respectful! Can be rare on RUclips these days. Hope you’re having a good weekend!
@@CaptainKleeman you have a great weekend also. They're a neat concept, I'm just old school on lots of things I guess. I try to keep my binders lubed up and clean, but you understand the salt and crap as I do. I live in the wrong climate...lol.
I don’t see it so much about speed. I mean who’s out here chaining loads down like you are in nascar changing tires. It’s more about convenience. Making your work easier. Work smarter. Not harder I guess is the analogy. But to each your own. Do what you like best.
Let’s adjust the camera moves it exactly where it was it takes exactly the same amount of time as a normal one cost 6 times as much also if your rub rails are not rated for 9100 pounds then there is no point in owning one
Been using them for over a year. Love them, in fact he bought them for all three trailers. and your data is off just a bit there bud. Hope your evening is a good one!
They are cute. But ill keep my breakovers, throw it on the ground pull it through the salt and it still works everytime. And faster than either of those
That's great man! Keep on trucking and be safe!
That Truck Sounds Awesome 👌
Can't you use that lever on that Speed Binder ?
What is the lever for?
keeps the main body from rotating. good question!
I really like the idea of the speed binders but my thing is with them that's another drill more crap I have to worry with in the truck and more stuff for people to lose awesome video though
yeah, you aren't wrong. if you're going to get thesem you have to invest in the full setup
And the winner is...Snap binder!
I’ve gotta invest in some of these for sure
I'm pretty sure where you have the outside chain is not legal
Rub rail is legal where we are
@@CaptainKleeman i believe that but I understand that if it gets hit your load is going down legeal or not inside is safer not legal in some pl
Looks like it's really a personal decision on which binder to use. If the difference in time was greater and you avoided busted knuckles,,,, it would be a no brainer.
i'm curious to see how they do through the winter, that seems to be when we have the most trouble with the ratchet binders. i'll be sure to post updates.
Dude love you and Mike's vids.. But on this one I think I'd have to disagree with ya...Seems like too much extra work...Some things are already as good as it gets even if we have been using it for years...Keep up the great vids!
hey thanks for the opinion! i really do appreciate views from all sidess. keeps us all honest!
Ya i still rather use the good old lever binders
diezel 97 if you’re happy then I’m happy! Thanks for watching!
They will knock your teeth out learned that the hard way
Not if you know how to work with them properly
Strictly speaking you have to include the time it takes (call it effort ) to plug your Battery into the the charger (omit the charging time)
remove it from the Charger and get the Drill on site. As you measuring "effort"and time here, you'r behind with your Drill. Nice Video
Aside from the fact that it really isn't that much faster, the price difference and the fact that you need a cordless drill to use one just doesn't seem like this product would be worthwhile to own.
Been using them a while now, love them.
Wouldn't have made more sense to use an impact?
Doesn't get it as tight in my experience
The workout is good for you Kleeman lol
thats very true!
Why does no one in America seem to use over centre twitches and all seem to use these awful threaded load binders?
Alex Hartman what’s an over cente twitch?
All good until you loose the socket or your battery dies 😂
You know the auto industry had the same fear when they introduced tires, they came up with a genius solution…carry a spare…😂
@@CaptainKleeman yes you are correct. Just one more thing to keep track of for me. I will stick with old school for now.
sorry.. i'm not going to buy a $100 binder and a $200-$400 impact drill to save 1 second and some arm strength..... lazy man's binder.
No worries! They aren't for everyone. We've used them for two years now and they are absolute time savers with the right setup, especially since I haul several trips a day. But probably wouldn't make sense for your lawn mower.
To play devil's advocate what if your batteries die before you get all 4 off?
You can use a regular ratchet (but it's slow) We keep two batteries and a charger on the truck
Not every one is going to carry a battery drill around with them to tighten the binder so the ordinary old binder really shines out then, sure they do make it easy but you haven’t got that feel when it’s tight it’s a bit of a guess how tight they are, yet with the ratchet type you know how tight they are , and are quicker to attach from the start you don’t have to go look for a drill check the battery charge then start by the time you do all that you would have the ratchet one on and tight but either way each to there own
i understand everyone might not like them. and to that i have to agree with you...to each their own. haha. hey thanks for watching and hope your week is off to a great start!