Did you know that those Valves are adjustable ? Theres a screw on the top .. Remove Loctite Turn Clockwise to make Higher Anticloclwise to make Lower ... Before one throws it away ...
Couldn’t find a video on my neighbours logix washing machine think it’s a vestel machine under that brand. It kept overfilling near enough to the top of the door then e12 would come up and beep I done what you said blew down the pipe and I also blew into the pressure switch put it all back together and now it’s working fine again and stoping the water at more appropriate level. How it didn’t flood I do not know. Great video thought she needed a new pressure switch but it’s fine now something flew out of it when I pulled it off.
Can you do a review on replacement of the rubber around the door. Mine is worn out. I have LG WM3488HW 24" Washer/Dryer Combo with 2.3 cu. ft. Capacity, Stainless Steel Drum in White
I have a F1280CDP25 model LG washer. The stainless drum isn't turning to the left or right and ends up giving the LE error. I have watched your video on that, hopefully it will help fix mine.
Very helpful thanks! Mine start working the cycle fine but at some point (usually about 10 min before the cycle ends) start filling with water about half of the drum then drains by it self. Do you think that this issue is related to that sensor? This also cause delay on the cycle maybe about 5 min or more than it should be. Just as a reference, I have WM2688HWM.
@@askmrwashywashy thanks for your reply! Yes, I think the rinse cycle but is on the transition to spinning. But, do you think could be the same sensor? Thank again!!
i have same model but the problem is water supply is constant even when machine plug is removed. Any idea folks what is the problem? i think somekind of stopper is not working or need cleaning. please help
When I blow in that pipe I can hear the water inside the drum bubbling it’s that alright?
Good teaching
Did you know that those Valves are adjustable ?
Theres a screw on the top ..
Remove Loctite
Turn Clockwise to make Higher
Anticloclwise to make Lower ...
Before one throws it away ...
Couldn’t find a video on my neighbours logix washing machine think it’s a vestel machine under that brand.
It kept overfilling near enough to the top of the door then e12 would come up and beep I done what you said blew down the pipe and I also blew into the pressure switch put it all back together and now it’s working fine again and stoping the water at more appropriate level.
How it didn’t flood I do not know.
Great video thought she needed a new pressure switch but it’s fine now something flew out of it when I pulled it off.
Thank you very much,it saves me from calling a technician.👍👍
Brilliant!
Can you do a review on replacement of the rubber around the door. Mine is worn out. I have LG WM3488HW 24" Washer/Dryer Combo with 2.3 cu. ft. Capacity, Stainless Steel Drum in White
Ok will try and find that model and do it in the next few weeks
@@askmrwashywashy thank you so much
thanks
I have a F1280CDP25 model LG washer. The stainless drum isn't turning to the left or right and ends up giving the LE error. I have watched your video on that, hopefully it will help fix mine.
Hi yes that should be it the sensor. Change that and it will help
@@askmrwashywashy Thanks
@@chibosstv4271 how did you fix it?
nice job i dont sub to too many pepple but you got my vote i subed to this guy fixed mine too
Thank you. Glad you got some value from it
Very helpful thanks! Mine start working the cycle fine but at some point (usually about 10 min before the cycle ends) start filling with water about half of the drum then drains by it self. Do you think that this issue is related to that sensor? This also cause delay on the cycle maybe about 5 min or more than it should be. Just as a reference, I have WM2688HWM.
I think 10 min before is rinse cycle
@@askmrwashywashy thanks for your reply! Yes, I think the rinse cycle but is on the transition to spinning. But, do you think could be the same sensor? Thank again!!
i have same model but the problem is water supply is constant even when machine plug is removed. Any idea folks what is the problem? i think somekind of stopper is not working or need cleaning. please help
Solenoid is stuck open
@@AnUnapologeticApologist thanks it is working fine now after changing the solenoid
Super helpful, cheers!
როგორ უნდა შევიძინოთ?
What happens if the water does not stop filling? Is there a overflow shutoff to prevent the water going on the floor?
Hi no. The models that have one are for flood prevention in case there is a leak.
@@askmrwashywashy Is there a flood prevention device of some kind available I can get?
What washing machine these days have this much water in the drum?
Get to the point
These washers are nothing but problems.
Exactly 😢