LG Washer water running fix
HTML-код
- Опубликовано: 19 сен 2020
- I have an LG Waveforce washer that had an issues where the water would run throughout the entire cycle. Did some research, found out the inlet valve needed to be replaced. A repair that could easily cost hundreds of dollars or more. Following these easy steps in the video, and doing it yourself will save you a TON!
Link for the part on Amazon listed below:
www.amazon.com/AJU73213301-33... 
Хобби
Just wanted to say this was exactly what I needed to save my mom's washer! Thank you sooooo much! Saved her like $500 in repairs or replacement
So glad that worked for you as well! Thanks for watching!
How much was that piece
@@tinobrown172 My mother bought it on Amazon, I think it was around $25 like the one in the video description
Hiii how to fix my hisence top load washing machine control panel @@35jspeed
You are a life saver..🙏🏼 got 5 kids and couldn’t afford another washer..
I’m glad I could help. Thanks for watching!
Thanks buddy! When this happened to my wife’s washing machine, she was ready to run out and buy a new one for $900. I said hold on a second, I got an idea. Your video helped tremendously! Probably save me about 800 bucks thanks again!
So glad to hear that. Hopefully she let you spend the money you saved on you! 😁👍
My mother has the same washer, and im glad i did some research. She already had in my to purchase a new one! I am currently ordering the part so i can get it fixed for her tomorrow!
Much love from houston, thank you, bro!
You're a breath of fresh air. You don't talk too much you're not caught up in how you look and you deliver the information short and sweet and easy to understand. Thank you
Wow, thank you. That means a lot! Thanks for watching!
Stop flirting B
Great video! I just ordered an inlet water valve from Amazon and will install it when it arrives. I appreciate how simple and easy you made it look. I am repairing my washing machine for less than $40. Thank you!!
Thanks for watching!
I know this video is a few years old (and I don't have the exact washer), but thank you so much! $60 to repair myself on a washer that is only 5 years old.
Thank you so much for watching. So glad I could help.
I'm so glad I just found this video...going to use this as a reference to fix my washer! Thank you!
Thanks so much for watching!
thank you so much. it worked. just want to share one experience that I brought the defected inlet valve part and due to that, the water was leaking after installation. i was not sure what caused the water leak. and i purchased another inlet valve and installed it. it worked.
Right on, thanks for watching and commenting.
Excellent video. Thank you for saving me a lot of money on repairs!
Thank you for watching!
Great video. I save so much money with RUclips. Ordering my inlet Valve now. Thank you!
Thank you so much for watching! Glad I could help.
Great job, thank you. Easy to follow instructions made job a piece of cake.
Thanks so much for watching!
Most helpful video I’ve seen on this issue. Thank you sir!
Thank you! I’m so glad it helped. Thanks for watching.
Thank you soo much for teaching us how to repair our appliances . God Bless you
Thank you so much for watching. 😁😁
Wow I'm about to order one now I have had this problem for about a month. Great video 👍🏾
Thank you so much for watching.
This is a well done video. Informative and entertaining. Thanks.
Thank you so much for watching. I’m glad it helped.
Thanks for the video! 👍
Thanks Jason! Great video.
Thank you
Your video is exactly what I needed. Thanks!!
Thanks so much for watching. I’m glad that helped!
Thank you Very Much. Very Helpful. And Thank you For Taking your Time To Made Tha Video👍
Thanks for watching! So happy that was helpful.
i followed you and fixed my washer thank you
Thank you! I’m so glad that it worked for you as well!
Thanks for the lesson!
Thanks for watching!
We had the same piece changed on our brand new LG washer a couple years ago. But since then, the water level is always too low and we have to stay close to the machine, stop it, press the water plus button for a second time (we always press it when we put the load in).
But if the load is really heavy, it works fine. Does it have to do with another part, like the sensor for the weight ?
Thanks for your interesting video 😊
Thank you 🙏🏾
Nice job , I'm next , just ordered my valves , will do it this wknd .
Thank you for watching, how did your project go?
@@35jspeed it went as expected very easy to do thank you for asking 😊
This seems to be happening more frequently. But only when my husband washes clothes! 😂🤕Was wondering why it only happens with him! Anyway thanks and great job on the video!
Thank you
Thank you. I’m pretty handy so I’ll try to do this myself so I can save $200.
Thanks for watching!
Thanks, buddy for the information.... That helped big time. Also what kind of video software did you use to put this great video together? Thanks again!
Thanks for watching. I really appreciate that. I used iMovie. For the thumbnail, I used pic monkey. 😁👍🏽
@@35jspeed Thanks so much, buddy.... Keep them a-coming!
Excellent
Thank you so much watching!
I'm hoping that you can help me. I looked at other videos but I don't see one that I need. I have a LG but my problem is that it is dripping inside the tub not onto the floor and then I can't figure out how to get it to drain. Do you have any suggestions on how to fix this? Thanks so much!
Hi, I’d be happy to try and help. I just want to follow what you’re saying. Are you saying it’s dripping on the floor or what do you mean by inside the tub?
Thanks
Is your washer called the LG Waveforce? Where did you source the replacement from? Thank You for any help!
It was a Waveforce, yes. And I believe it was from LG forums and videos I’ve watched. I didn’t know that would be the solution, but I was hopeful enough to do the video.
@@35jspeed Cool thanks! I found one @ my local appliance supply store. Your Vid helped point me in the right direction , appreciate it man!
@@Fishingforbasstv Hey thanks for watching!
❤️thank you ❤️
My pleasure, thanks for watching!
I have the same problem right now, it's good I saw it, if not, then my laundry room would be flooded. It's different LG washer, so the valve is probably different.
This was super helpful!
But... Now I'm getting an IE error.
Anyone have tips on why/how this can be fixed?
Hi Jessica, thank you so much for watching. My best guest is one of the plugs in wrong slot or not in all the way. I wouldn’t know for sure, I never had that error.
Does this display the IE or UE error codes when the water continues to run? This happens to our machine and it won't advance to the next cycle.
So this was from 3 years ago, however I do think I remember seeing an IE code on the display. I hope it helps, thank so much for watching.
Fix👍
How did you know it was the valve, and not the water level sensor?
Just from different research that I’ve done. A lot of people with the same issue pointed at the inlet valve. I was willing to gamble to see if it was.
you are talking about the valves not shutting off.
I thought you were going to explain why it fills with too much water. how to test the water level switch/sensor or whatever.
Hi, so sorry for the delayed reply, I’m rarely on this channel anymore. I didn’t know the inlet valve would fix it, or even to properly diagnose it, I just saw similar problems online and the valve kept coming up as a solution.
How did you diagnose the faulty inlet valve?
This seemed to be a common answer when I looked online for people having similar issues with their washer. I took a chance.
Whoooaaaa! It folds!
😂😂😂👍🏽
What is the name of the part you ordered?
It was called an inlet valve.
Would you happen to have the model number to the part? I would hate to order the wrong part.
I’m so sorry for the delay in seeing your comment. If you haven’t ordered already, I’d be happy to look it up to see what part number it was.
Man I sure do appreciate you taking your time and troubleshooting my problem. It save me a ton of money for cutting out the tech and was an easy fix. God bless you and thanks again 👍
Hi all, thanks so much for watching and commenting. Here is the link to the Amazon order:
LG AJU75152601 Genuine OEM Water Inlet Valve Assembly for LG Washing Machines a.co/d/47qbQN1
What part number is it?
So what if just the cold water won’t stop running?
If the water won't stop running, hot or cold, it could be an inlet valve like I replaced. There's no way to separate and replace just the hot or cold side. I hope that helps.
Hello, my LG washer ran water throughout all cycles. So I watched your video, bought and replaced the water inlet valve.
Hooked hoses to the hot & cold. Plugged washer in. As soon as I turned the water on, it started pouring into the machine without the power even on. What do u think is happening? Has the computer module gone bad.
Regards,
Tony
Hi Edward, thank you so much for watching and leaving a comment. I'm not at a washer expert or certified repair man. I would first go back to make sure all the plugs were securely plugged in, and in the right spot. Then I'd probably do a little research with that problem and see if someone else has had the same problem and found a solution for it. I'm sorry you're having that problem now and you weren't before. Best of luck though.
@@35jspeed It was running water constantly when I got it. The original owner sold it to me for $50, saying it only needed suspension rods. Not the case as it ran water. So per your video, I open the back of the washer, marked the plugs 1 2 3 4 5, and changed the water inlet valve. The problem has to be electrical or in the board. But I'll figure it out.
Thanks for your video!!
Did the water keep filling when you paused the washer?
yea
Would the water run even when the whole washer was off ??
No, just consistently throughout the wash cycle.
Did yours leak too at spinning
The problem I had was the water was running for the entire cycle, rinse, spin, wash, the whole bit.
@@35jspeed Yes ours too, and it also sprayed up over the basket on to floor at spin cycle
I've ordered the inlet valve $40 on Amazon, I will receive it Sunday and let you know if it fixes it, Thanks for responding 😀
What is that part called?
It’s called an inlet valve. I believe I put the link to it in the description.
Name of part same problem I have
Hi Raul, I replaced the inlet valve. I have a link for where I ordered it from in the comments. Thanks for watching!