That's funny the clutch and variator say TGB! If you put your palms on the clutch bell. You can open the rest pulley by squeezing your fingers towards you. Then hold it with one hand, and the belt will slide between the pulley halves. That's how I have done it. No problem getting the belt on the front then. They obviously had a problem with the plug lead. But you will fix it properly. 👍
You have a decent setup there Gary ( with the table n old mans gear ) great descriptions of how to do the jobs for the viewers , looking forward to the end result bud 👍
Nice work again Gary. Follow you and your dad's channels. Absolutely love all the content and always can't wait for the next videos. Keep up the good work 🤙
tip for you when changing belts on automatic motorcycles if you squeeze the clutch half closest to the bell whill turning it it will open up. once it has opened up you can slot the belt in wich will allow some slack so it is easier to place it over the variator pin 👍
@@ProjectMan a little yeah but I didn't know how long to heat it and didn't want to push it. Might try it again though and get it a bit hotter. Do I let cool right down again before trying to loosen it or give it a go when it's still warm?
Looking good 👍 someone will have a nice scooter when you're finished
Cheers bud 👍🏻
Lifting table looks the business Gary and your doing a top job on bike 🏍👍
Thank you 👍🏻
Great job,keep up the good content, Gary hope everyone is good
Cheers martin 👌
Thanks for the update Gary, i noticed your one glove was comprimised....take care
Thanks val.
Happy you said you where painting the exhaust.😀 Nice work Gary. 👍
All done 👍🏻
Coming on nice
Gary
Great video mate again you make it look so easy you will be learning ur dad some tricks be for long keep these videis coming
Phil n stoke
Cheers Phil 👍🏻
It's getting there now gary the old man has got a compressor he don't use get him to put it in for you👍👍👍👍
Lol il let you ask him 🤣
Looking good gary. Thanks for the informative video
Cheers bud 👌
That's funny the clutch and variator say TGB!
If you put your palms on the clutch bell. You can open the rest pulley by squeezing your fingers towards you. Then hold it with one hand, and the belt will slide between the pulley halves. That's how I have done it. No problem getting the belt on the front then.
They obviously had a problem with the plug lead. But you will fix it properly. 👍
Cheers Paul appreciate it 👍🏻
Good content on this type of transmission Gary, Plenty of folks think its magic what goes on under the cover.
Cheers martin 👌
nice one gary
Well done Gary, great video! Top work as always. 👍
Nice video Gary! You’ve obviously done this before, very professional! 👍
Cheers bud 👍🏻
You have a decent setup there Gary ( with the table n old mans gear ) great descriptions of how to do the jobs for the viewers , looking forward to the end result bud 👍
Cheers bud 👍🏻
You do great work Gary !
Cheers Mark 👍🏻
Coming along nicely Gary you done a good job on the belt, I would of been swearing at it lol
Lol cheers adie 👍🏻
Nice work again Gary. Follow you and your dad's channels. Absolutely love all the content and always can't wait for the next videos. Keep up the good work 🤙
Cheers matt 👌
great video i have learned alot
👍🏻👍🏻
Nice job Gary I noticed in you last video you had a newer table. 🤙👍
Cheers Ali 👌
Soon be rolling again nice one 👍🏼
Hopefully wanna get on with the tzr 👍🏻
tip for you when changing belts on automatic motorcycles if you squeeze the clutch half closest to the bell whill turning it it will open up. once it has opened up you can slot the belt in wich will allow some slack so it is easier to place it over the variator pin 👍
Cheers bud 👌
Nice vid
👍🏻
Looking good
Cracking video mate 👍 any tips for getting my variator and clutch nuts off? I've got a jcb impact and a holding tool, tried both with no luck 🤔
You tryed a bit of heat.
@@ProjectMan a little yeah but I didn't know how long to heat it and didn't want to push it. Might try it again though and get it a bit hotter. Do I let cool right down again before trying to loosen it or give it a go when it's still warm?
Do it when it's hot 👍🏻
@@ProjectMan cool ill give it a go thanks mate 👍
👍 👍 🏴
In the last video you never acknowledged my comment, 😂 sorry if it upset ya Gary lad 👍 top video fella 👍👍
I don't recall seeing it and don't always get notifications bud It can't be that bad 😂
@@ProjectMan wasn’t anything nasty mate. Just banter 👍👍
I love a bit of banta 👍🏻
Wheres the comment tag me in it can't find it 🙈
Hi Gary how much do you want for the mobility scooter as I'm looking for a cheap one for my mum
Sorry bud its gone 👍🏻
@@ProjectMan ok gary thanks for getting back to me great channel keeps the videos i watch yours and your dads every time a new video is uploaded
Cheers bud 👍🏻
❤🛵