How To Sturdy Up a Fiberglass Tub Shower Using Spray Foam
HTML-код
- Опубликовано: 6 дек 2020
- This is a solution I came up with for making your tub more sturdy when you're doing it by yourself. There are other methods, but not as easy or even possible if you're alone.
Part 1: Tub Shower Install
• One Piece Tub Shower I...
Thank you for following our journey. Subscribe, Like, + Share if you haven’t already!
We’re enjoying all of the messages we get about projects + ideas!
Tool | Equipment | House Recommendations
www.amazon.com/shop/marshallr...
Daily Updates
Instagram / marshallremodel
Facebook / marshallremodel
Email | Website
info@marshallremodel.com
www.marshallremodel.com
Music Licensing through Soundstripe
soundstripe.com?fpr=marshall10
Use code Marshall10 for 10% off your subscription!
#postframe #selfbuild #construction 
Хобби
I'm thinking of ordering a set just so and can dream about it. I have really enjoyed your series and plan to watch from the beginning again. You are a top craftsman. Your lovely wife is so positive about you and the build.
Excellent tip using the spray foam and poly for strengthening the floor. Quiet and Sturdy now! Great work Paul..
Thanks!
Great tips!
Well done. Always enjoy watching an experienced builder in action.
Brilliant! Sadly, too late for my tub install. I've had to be creative when working alone. I really like the support for the sides of the tub. Thanks for sharing.
Great, clear photography of your process! I would only add (and maybe I missed this in others' comments) to wear disposable gloves while foaming, hold the can upside down, and resist filling the space, the foam will continue expanding. The "pro" nozzles they sell, though they seem expensive, are worth every penny on long projects. You can stop and start as often as you need to. The steel nozzle on them also allows a larger diameter extention tube when needed.
This is great. That foam gun with the hose hack and wire is brilliant.
Thank you!
Thanks for this! Mid-major-remodel and the next step is tub install. I had planned on using mortar but this makes a lot more sense! Especially after seeing the comments about insulating the bottom...
Awesome! Glad it helped.
I've used that foam on cracks and such.. but you used it creatively in your situation. Great idea.
Thanks for watching!
Great lessons today on the foam around the tub/shower. Looks great. Thanks.
Glad you liked it!
Love this idea for multiple reasons. Thanks for sharing.
I did the same thing for my bathroom remodel tub. It's rock solid.
Awesome!
Added benefit of insulation for the tub keeps it hot longer! My best friends dad bedded a tub in mortar and the tub was always ice cold quickly. Mortar draws out the heat so fast. When I replaced my rub, I installed it, but was able to access the bottom, I used spray foam, worked amazing and the water stays warmer. I've stiffened quite a few showers for friends using minimally expanding foam and drilling holes through the subfloor for access. Minimally expanding to keep the shower from floating off the floor. Works great!
That just because he turned the hot water off so you'd start bathing at home instead of jacking up his water bill.
What specific foam do you use? Things still holding up well?
Your attention to detail is marvelous. Great job.....jobs.
Thank you very much!
Great work, Paul! As a plumber, my one thought would be to intentionally leave enough access around the shower valve and the tub drain to clearly check for leaks and to service them. This really does fix one of my biggest bug bears with "glass tubs and shower enclosures. Merry Christmas to You and the Family!
Thanks for the tip!
Great bro this is exactly what I was thinking about to filling under a tiny space under a bathtub
but I don’t know how to do it
Your idea with the 1/8 tubing and a piece of cable is just simply brilliant
Thank you very much
Thanks!
Great tips Paul ...Thanks for sharing.
Great videos! 👍🏼👍🏼
I did something similar for a handicapped friend that wanted his tub water to stay warm longer… so he could soak his sore hips without getting cold or needing to re-fill the tub every 10 minutes.
Installed the tub, filled it with water, spray foamed the bottom, let the bottom foam harden, then got more foam & went all the way up 3 sides of the tub with the door & window foam (not fully on the drain side, didn’t want to mess with foam on my drain pipes). Foamed it all up to just above the water line. Worked very well for him; just glad I’m not the guy tearing it out. 😂🤣
Thank you for that idea of the tub extension
Keep up the hard work. Great ideas too.
Thank you!
Thank you! This was exactly what I needed for my tub!
Great video, I wish I had seen this before I did my tub install. Now I have to take the skirt off again and fix it.
Always great tips and tricks...thank you! Keep up the good work!
Thanks for watching!
@@MrPostFrame you bet!!
Great work man, really appreciate the video.
You're Awesome Thank you SOOOOO much I've been waiting to set my tub until I figured out how to get that sprayed under there. Thanks again
Awesome thanks for the comment
Nice work Paul, never thought of that. Seems to work great I'll have to file that idea away.
Thanks!
I did some BCA brick + foam with bricks as a side wall. (with a metal fram & legs install, too)--and it is GREAT.thanks
Great idea, paul! I knew those pieces of XPS that I saved would be useful for something!
Awesome!
Very clever system that makes a much more professional installation.
Thank you!
@@MrPostFrame No need for thanks. RUclips rewards comments and I so I make sure to say something and to share as well. What a job - you are a man among men my friend; family generations will remember your strength of purpose here... It sounds funny, but it's a really massive job that you've take on and are doing very well.
Was thinking of doing the same thing now that I have seen it work I'm In ! But my whole install is a blind reach between and behind the 2x4s water buckets a great idea thanks for taking the time for the rest of us
Thanks for the comment, and glad it was helpful!
Did you do this? How’d it go? Holding up well?
Awesome ideas
Nicely done.
Thank you for posting
Great video , the bottom of my tub is weak and I really can't afford a new tub right now I was trying to think of a way to put something under the tub to help . I came across this video and so glad I did , this is very helpful .
Did you do it? Holding up?
Thank you so much. We just had our bathroom redone but the plastic tub sounds like you going to step through it sometimes. Was trying to think of a way to support it better and you video shows me I have the right idea.
Did you try it?
Makes me feel better I didn’t already as much my dad a plumber told me to be careful not to do to much, it’s definitely inflated a lot more but I think it’s fine
Enjoyed the show
Thank you!
That is a great trick! I'll have to remember that one!
Yeah, but how long before the foam breaks down and you are left with an unsupported tub?
@@corwin5557 worst case scenario, your left without the extra support and the tub is standing like it was originally designed on it's factory support points
Thanks!
Licensed Master Plumber here, these are great ideas. I normally encourage people to get a tub base and tile the walls, but occasionally I get a fibeglass unit to install. I'd like to try these ideas on the next one.
Yes, if budget and time allowed we'd prefer tile walls, but we think these will do well.
Why use great stuff it is not rigid when it dries but soft. How will it support weight?
I remember the old days when the plumber got out the sakrete to set the tub in. This is a much better system, especially fastening the sides to the studs. Great job.
Thanks!
@@MrPostFrame Why use great stuff it is not rigid when it dries but soft. How will it support weight?
@@chrislasala Im wondering this myself.
Um. Like, this video just saved my life. Thank you!
Did you do it? How’d it work and hold up?
I will be installing a new tub and I will use the foam systems same as you used ....... Thank You
Awesome!
Thanks so much for this video!!
Glad it was helpful!
Excellent tips
Thanks!
Great tips👍
Beautiful thanks
👍 Great information
Good idea 👍
Thanks!
Well done. 👍👍👍
Thanks for watching!
When I did remodeled my master bath the plumber put cement down to create a bed for the fiberglass tub. It worked well. When I redid the another bathroom, the plumber didn't do this and a year later it creaks like crazy. I just tried the spray foam like you did here and it was a big mess. There was probably less than an inch between the tub and floor so I just used the spray foam. However, when spraying the foam, the tube kept popping off from the pressure and foam was coming out before it even before it hit the tube. As a matter of fact the tube that came with the can broke off due to pressure. Home Depot didn't have the 3" filler so I just used the 1". What a mess though. The mess was caused by the tube popping off and the foam leaking out before it even entered the tube. I have foam on my arms and hands and everywhere on the ground. Good thing I had gloves on. Now the bad news-the tub still creaks.
Amazing video. I learned a thing or seven!
Thanks for watching!
Good suggestions brother
Thanks!
Great video!!!. I always hear about the mortar base also as you said in beginning of video. However , you will not find mortar beds in rv's and mobile homes. I'm installing a new neo angle shower pan in rv and will be using this technique.
Thanks, glad it was helpful
I've seen so many budget builders just throw the tub in with a few screws and call it good, and I'm like wth? So with my son's new construction house I research every step and try to do everything right. He wanted a tub with the 3 piece walls so we got to shimming yesterday and the instructions said to put glue on the studs then secure the walls somehow so they stay in contact with the studs til the glue dries. Well, most of the studs barely even touch the walls as it is, so I plan to add some 2x4's onto the existing studs and getting them closer to the wall panels. So I told my wife that the instructions said to glue the walls to the studs which would then have to be secured, and she said, why not just use the spray foam? So with that great idea and a quick search here I am! Now I can make this flimsy-ass shower a lot more solid. I do plan on using the window/door foam.
We are in our 70s and doing a drop in whirlpool/Air tub from Comfortflo whose directions is to pour a Mortar base and cover it with plastic. The problem is we have less then 3 inches around the tub and with a drop in we cannot lift it drop it in after cutting the top part at about 155 lbs. I woke up in the middle of the night thinking about using Expansion Foam and so that is how I ended up here on your RUclips Video researching the idea.
I picked up a couple of other ideas from you and I can see a professional who takes pride in his work doing his job. My tub is in now and I am hooking up water and electric. When all of that is finished I will duplicate your procedure and see how it works. I did install 1/2 inch plywood and 1/2 in hard board to floor already to lift it 3 inches and allow the 1 1/2 inch drain pipes to install. One thing is that expansion Foam will expand and can lift the tub so I will be filling it about 80 percent water first and working in increments with the foam to insure minimum expansion. Your video is much appreciated and your work is very professional as well as your explanation and camera usage. Thank you
mortar shrinks. this is great.
I only recommend foam for existing tubs. If you're putting in new, regular old mortar any day. It holds up buildings. Just make some width-wide humps taller than the gap underneath, and seat the tub in the mortar. It doesn't have to be fully supported 100%, but enough to stop any and all flexing. It'll squish down and bond like laying bricks. I also recommend ledger boards on all 3 walls to support the ledge and board(s) to support the apron. It'll easily support a 400 lb person after that.
Great video, thanks
Thanks for watching!
Do you use a high expansion, moderate expansion foam?
Good job.. this info will help us in our remodel..
Awesome!
Nice work
Thanks!
Thanks for making video
Thanks for watching!
Like that idea. I've seen guys glue a plywood piece to the shower wall and sister studs to attach it to the wall. Your plan likely is much quieter.
Thanks!
after a repair of my master shower drain which is above my kitchen. I added a little spray foam such as you are doing to help make the drain joint more ridged. It worked well, but now my water in the shower pan doesn't flow well from the rear and front of the pan to the drain. I have wondered if I need to open the kitchen ceiling again and try to remove some of that foam and use less!
What did you end up doing? Same layout in my home please reply thank you 😇
Definitely going in back of the brain filing cabinet.
Awesome!
Good idea
Thanks!
I have used great stuff (spray foam) on all plastic tubs and have never had one crack. I never used ridge foam under the tub along with spray. Put it seems like it would work also. I would buy a case and spray up the sides, front, back then set the tub and secure it to the studs. Then spray all under the tub front to back. Cut off what would squeeze out. And wall it up.. owners would tell me that there baths stayed hotter longer.
Doing good - keep it up
48 yrs experience
Thanks!
What foam do you use? I’m wanting to add this under an existing tub. Thanks!
I have a low spot in an installed tub. Can I use foam under that space to raise it?
Window and door foam are recommended. Great video!
Will this help if there is a crack going down into the drain ? I have chalked it and need to support it like you did in this video . I think mine is plastic or something but not sure
I installed an acrylic tub on a sub-floor but didn’t strengthen the floor beforehand (just put it where the old tub was). The acrylic tub has “feet” and one or two of the “feet” are squeaking the floor (slight movement). I know I will have to strengthen the floor from underneath (finished ceiling underneath so have to cut some of that down). Question is, how would I strengthen the floor underneath (between the floor joists)?
Thanks. I was worried about the expansive foam having too much pressure for the tub. The old timers used to use paper meshay (sp?) to fill the iron tubs before they set them.
Thanks for watching!
This is great! I will be doing this in a few days to my tub. But question for you.. if I were to not add this support (or any support) to my fiber glass tub what would happen?
they crack. mine did.
Did you do it? How’s it holding up?
Could this be done after house is finished? Or idea on what to do after we are completely finished ? We didn't do this and now I feel like our tub "pops".
Beautiful ,,,,good video
Thank you
You are big boss
Thanks for watching!
I have a tub that makes a lot of noise when it's walked on. I have no way to access under the tub. I think it needs foam board under it. Can I remove it and pack the floor with foam board and then put it back in?
Mine is already installed years ago. I just got a 2’ window to have access to the plumbing. Its recently gotten creaky and theres No base flooring at all under it! Just beams. I’m very shocked. Not sure if i can do this with nothing under it at all.
big help thank you, warm feet.
You're welcome
I’ve had to replace one tub and one shower due to cheap fixtures or couples saving water😉. Split right down the middle on both units. I always pre-fill with mortar first. Try small diameter pex pipe next time for the foam.
couples saving water :-))
Haha that's why we had to sturdy this thing up. 😆
Great video. My situation is that the builder installed an acrylic tub but didn’t attach it to the wall so the tub sags and pulls the caulking apart. I can get access from an access panel for the jacuzzi pump. I’m looking forward to trying this solution. The back wall is exterior stucco so I can’t come at it from the backside.
Sorry you’re having to come up with a solution! This method seems To be holding up well we are in the house using these tubs
I have a similar situation. I'm interested to hear if you ended up doing it.
My bathtub is in the wood frame with tiles on top. They made a wood tower, for every tub leg, to make it higher and screw the towers to the sub floor. The tub itself wasn't attached to anything, except for caulking between the top of the bathtub and tiles. Caulking cracked everywhere, so I had to remove it, but it only made it worse and unstable.
@@Alex-gc2gs Upon further investigation, it looks like my wife bought a "bargin", saved money but will ultimately cost more money. The tub can't be attached to the wall, it's meant to set on a 2 ft high wall. Someday, the whole bathroom will need to be rebuilt.
Great instructional video. Too late for me. I installed a 3 piece kit over green drywall for an existing steel tub. There is a small gap on the sidewall that allows movement of the plastic surround. This causes cracks in the tub calking. I want to stop this movement. Any ideas?
you can turn the hose up and shoot the stuff in behind it and then let it expand. Hope you get enough in the right area to expand to push out on the panel. Then when you have achieved optimal foaming, add a bead of silicone. IF you can get to it from any other area, even a small hole in the drywall, you could use the same trick. Hose attached to a coat hangar or something pliable/bendable but stiff enough to hold in position, or just a hose if stiffness and control is not a major issue..
I just want to be sure, the big gaps and cracks wont raise the tub if you have weight on it?
Is this the manufacturer recommended technique?
I remember using sand mix.
This looks easy but not cheap.
End of video he says $35 per shower. Even if its $70 per shower is worth it.... working with mortar too much work.
Time over money, need to think differently 👍🏼
I wish I could do that, but where I live only concrete can be used for the bottom.
I have same issue. The very expensive shower kit I bought recommended no mortar bed over wood sub floor and I questioned it. Sure enough now that my shower is installed and new walls are in we’ve used the shower and the floor is soft and makes squeaking noises.
That's a drag.
Same thing with the shower base in our ensuite. I just pulled the one piece shower/tub on the opposite side and will use the Marshall Spray Foam Extension Tube to get some minimal expansion foam sprayed under the shower pan. Then i'll use this trick for the new soaker tub. Hopefully you can remove some drywall and get some spray foam under yours. Squeaking and flexing will lead to cracks down the road, i would think.
What about for a mobile home shower tub combo with a small crack going into the drain flange and the drain is in the middle towards the back of the tub :/
Good morning from St John Parish, Louisiana 20 Dec 20.
Morning!
If you are doing this make sure to use the windows and doors spray foam the normal spray foam may expand too much and warp your tub
I repair bathtub floors that break due to lack of support. I charge between $1,300 to $2,800 depending on the amount of damage to be cut out and rebuilt. For less than $40 for proper support at the time of installation, as shown, that repair cost can be avoided in the future. I'm putting a link to this video on our website and social media - Well done.
~
(BTW - never try to repair a broken bathtub floor by drilling holes and injecting foam: that does not magically repair the broken fiberglass or rotted core. Use solid wood support, then a layer of fiberglass, core, top layer of fiberglass, and finally topcoat.) topcoat.
great video again. 1 suggestion get an external wireless mike.. your voice fades in and out depending on distance from camera
Thanks! We need to
My wife and I purchased 12 acres and a brand new manufacturered home. Giant tub and it was barely supported. I took the side panels off and used the remainder of a kit to fill the void . The unexpected benefit is its like a yeti cup now. A hot bath will stay hot longer
How’s it holding up?
As I mention in your install video, you will enjoy this trick. I spray the outside of the bath before install with a layer and fill it up after install. It will insulates showering sound, keep the bath water longer 🥵 hot and indeed overall give a sturdy feel.
Awesome thanks!
Does not your tub comes with plywood under it plus the 4 legs if so do u still need this thx
This is what I'm trying to figure out. I have an acrylic one with this and it feels kind of flimsy when it arrived and I sat inside of it.
I never wanted to buy a tub surround because the sides always feel so cheap when they flex. Next time it won't factor in as a con when deciding which way to go. Thanks for posting.
You're welcome! For us it's been a good way to minimize some costs in our projects.
Are the 5 gallon buckets necessary? I currently have a customer wanting this done. So if you use the filled buckets, spray foam, then remove the buckets after dry, won't that allow a slight gap because once the buckets are lifted out, the tub would elevate slightly again? So wouldn't that create a gap and it will squeek again, getting into a dry shower? I guess I'm debating if the 10 gallons of weight is necessary.
the idea is to hold the tub down so the stuff does not expand and lift the tub, If the tub it screwed to a wall like many alcove tubs then this wont be as much of an issue, but with this, until he "great stuff glued' it down, it didnt have anything holding it. Im curious about the weight it can actually hold before deforming, because if you poke the great stuff foam, or just make a dollop on the floor wait for it for harden then step on it, its deforms rather drastically. Yes it springs back into shape, but in my understanding this movement would be bad.
@@crisnmaryfam7344 ,I have to agree with Rich ..I would not put in any water in tub ..use the less expanding foam blue can not red ..
If you put water in tub it's going to leave gap when water is removed ...
How is the heating system doing??
Working great!
Do you think this idea might stop a tub from squeaking as you walk on it? When showering our tub squeaks like crazy. I do have and opening at one end that I can access from the faucet end of the tub.
Yes, it would probably help with noise!
I'd check to ve sure that the tub isn't touching the flooring on the skirt. Use caulk to seal the tub.
This is new construction. What would you do for an existing shower unit?
ours cracked less than 6 months after moving into our newly built house. guess they didn't bother supporting the floor before they installed it...🙄😠 we drilled holes in it, sprayed the foam, and let it cure. once it cured, we removed the excess and plugged the holes. they sell repair liners that go over the existing fiberglass floor. you use epoxy to glue it in and now you have a new floor.
Please what kind of tub is this
Forbidden Buttercream Showers
💯👍