Minimalist Overlanding Tool Kit: Needle Nose Pliers. Narrowing down the best option. Your thoughts?
HTML-код
- Опубликовано: 26 авг 2024
- In this installment of the Minimalist Overlanding Tool Kit, Needle Nose Pliers are under consideration. Here are my thoughts on how to narrow it down to one lucky pair.
I’m a knipex guy, here is something to look at as well, in appliance service I use needle nose every day and I use they’re 40 degree angled needle nose ( 2621200) a lot more than the traditional.
Tsunoda high viz handle pliers. Great quality for the price i bought most of their yellow handle pliers.
X2
That’s it👌
I guessed from the very beginning of the video you were going to pick the other green handle snap on needle nose without The bolt jaws. I was so close. I enjoy watching you talk through these things great video doc
By eliminating the vampliers you now need an additional tool for screw extraction. Albeit not ideal for larger screws as you stated in your video, it does, add another function that would add to the multi function minimalist approach.
Vampiiers are extremely highly rated for it's metal, strenght, holding jaws together under extreme pressure and for the handles. Wihout a doubt the best over all.
If committed to the minimalist idea then Knipex for size and weight but it has one role. The SO are a bit of a combo package and if you don't need the nut grip section then your just adding bulk and weight. Personally I'm not a fan of multi-use pliers as I, like you, have a variety to pick from for the task at hand.
My 4 Pliers to End All Pliers
- Snap On Needle Nose
- Snap On HC46ACF (the new Flank Drive)
- Knipex Twin Grip
- Knipex 7" Pliers Wrench
The Knipex Twin Grip and the Snappy HC46ACF have a lot of overlap, but the Knipex has more reach and the Vampliers screw extraction, the Snappy is way more heavy duty and a better overall grabber, and I think both have their place. I would actually drop the standard needle nose for the Snap On stork needle nose you eliminated pretty quickly - I can do close-in work with the Storks, but you can't make the standard needles longer. Lots of opportunities in an engine bay to need to reach into tight areas.
Honestly, the new Flank Drive 46 pliers from SnapOn have become my absolute favorites overall. The only thing keeping them from perfection is that a little V-groove in the nose like the Vampliers or Twin Grip would make them amazing.dd
Knipex Twin Grip would be, and is, my go to pliers in so many situations. They have gotten me out of jams everytime!
Brother if you ever had pair Klein pliers in your hand , you would think differently . I can't think one one electrician or HVAC tech that uses Snap On pliers .
@@mikeclark1756 I’m in manufacturing/machining. The flank drive nut grabber on the Snappy is why it is a winner in my environment. Most everything in our world is socket head cap screws, but the Snappy is great for the occasional nut or hex bolt you run into and need to deal with (short of walking all the way over to the tool box).
Hello again Doc
Thank you for another Great Video. What a choice to make. Based on the information, I would take the Snap-on pliers, because of the features it has. I would also choose another Vampliers in Case you do have stripped screws situation. But I think you're getting real close to being ready. Again thank you
Surprised you don't have the new snap on slip joint ones yet
That size of plier I would go with the Knipex, its got the better shape needle nose.
Would be interested in seeing your larger storage setup as I can't imagine how you deal with the sheer number of tools you own.
Have you seen the Knipex 08 22 145 Needle-Nose Combination Pliers? I find they have a useful variety of jaw surfaces, and they are pointy enough to reach most places. (Which reminded me to order a pair of the 08 25 145 chrome-plated ones for home so I can transfer the -22- ones to work use.)
I was going to suggest the same. They're really universal and are the ones I pick if I can't take the whole toolbox.
EXACTLY. That's also my favorite for that kind of pliers. They beat all plier heads of every multitool I've seen (and I've seen a lot). IN Germany they're e 18,95.- which is under $ 20.-. And they're extremely handy. BTW: has one of you ever seen the mini combination pliers 08 05 110? They're so cute... :.)
@@muxmurki1497 Yes, I've got those mini pliers :) Sometimes I wish they would add an extra gripping part instead of cutters.
I love my Vampliers. I was surprised by them
Of those two the Knipex, but I would also bring the long neck snap-ons. I probably reach for the long neck pliers more then any other plier, I love ‘em.
Knipex, if its between the final two. Needle nose are generally very specifically for when i cant get into an area with regular pliers, or need a really fine point to grab something small. The Knipex are better for that role. I often find that I skip the larger/thicker needle nose, and either grab the fine ones when needed, or a lineman's set.
Snap on for sure.
Knipex needle nose combination pliers are kinda cool. Wish they made a 180 or 200mm version of those.
Full sized Knipex or Klein and preferably something insulated.
My hand would reach for the Knipex, but I suspect that the answer is whichever one your hand reaches for.
Knipex 26 12 200 SB Snipe Nose Side Cutting Pliers (Stork Beak Pliers) Black Atramentized with Multi-Component Grips, 200 mm
If actually b/w these two then the Snap-On…. I imagine reach will be more critical than tip fineness. That being said I edc the Knipex 08-21-145 (especially for backcountry ski/bike) so my inclination is to “barbell” it with one of the snap-on long necks, but maybe my thinking is wrong?
This isn't even a question, always choose 8" over 6" so snap-on or get Knipex or channellock 8"
Have both Knipex and Klein 8”. Personally, I’m bringing the beefier Klein pliers since I normally end up needing to twist and pull at odd angles.. the Knipex flex too much.
I do appliance repair and the Vampliers long nose work perfect. For overlanding, I don’t know.
Handles are what matters to me. Longer with more grip, the better.
Tell me please the two model numbers???
Thanks
Tsunoda has the best selection.
In between those two definitely the Snap-on
I must be watching too many of your videos......I had you pegged for that Snap On 30 seconds into the video! It does seem like a good choice tho.
You should reconsider the Klein long nose pliers. If not go with the Knipex it's the best in the world
Have you thought about trying safety wire pliers for the fencing?
I'd say probably Snap-On due to length advantage
The knipex one with red slim handles, not the comfort ones
Snap On. Extra size worth the extra options you have with it
A 2611200 knipex would have been perfect
that knipex is a very good size and I'm guessing tacomas have some really tight spots but snap on is sturdier for a reason...and you'll probably feel better with the snappy
Knipex.
Tsunoda RP-150.
Knipex smaakes Snappen!
Snap on...
What model are those Klein you used for fencing?
amzn.to/3x1z780
shopping your own inventory
no.... im not jealous....
Snap On
Isn't there such a pliers called long nose cause I have the kliens and the packaging told me just that (long nose pliers ).!!! Just saying.
Thats where you might wanna be looking at leathermans.
NWS 140-69-170 6.75" Chain Nose Pliers
Probably the ticket, until snap on ln47acf come out
Ive got those knipex needle noses but the 8 inch, wish i had the 6 though since the 8s tips are a little slim for heavy use., and ive got those snap ons on order still waiting like a month later lol. Maybe tomorrow since its snap on tuesday.
Keep it simple, go with Knipex.
Snap on
What are those pliers you recommended for fencing? I want to get a pair for our community garden.
ruclips.net/video/Jaej2aqQSJ0/видео.html
Or the Klein Hybrid pliers. They are featured here: ruclips.net/video/_oQMFV7ts1k/видео.html
@@lastbesttool Perfect, thanks! I’m getting one of each. Just one more question... Would the wire tying pliers work as well as the Klein Hybrid? (Or is there a different option for the hybrid?) My only issue with the Klein is that brighter handles would be preferable in the garden (anything we can do to encourage gardeners to not leave stuff out, letting it get rusty).
@@lastbesttool Ok, I think I’ve answered my own question… Klein has 7-inch Linesman pliers with blue handles. Their handles are the same small size and weight as the Hybrid (I’m assuming the small size is one reason you liked them), plus they’re rated for cutting hard wire, nails and screws. Looks perfect.
Wire tying pliers are much like linesman but usually spring loaded and with a bend in the handle where your right pinky finger would sit. Handle color can be changed with shrink-fit covers or even redipping them whatever color you want using a vinyl dip product available at hardware stores. If you are doing a lot of wire tying, then dedicated wire tyers are great, And, of course, you can use them for whatever and however you like. Good luck.
Have you considered a multi tool, specifically the SOG with the gear drive pliers?
Jajajajja you really love the expensive ones
I think I'd keep a pair of wire stripers
Snap-on looks better to me
AS a german: sure knipex 🙃
The new Snap-on LN47ACF 9" Talon Grip™ Needle Nose Red Handle Soft Grip Pliers is the only one you need. They are brand new.
Knipex
Hey Doc, you should check on the Snap On LN47ACF... They may be a bit on the large side and I don't know what availability will be for you, but they are an interesting design. I've only used my pair once so far, but I like them.
LN47ACF
Please review new snap on combination needle nose : LN47ACF
I will just as soon as I can get a pair. They are not for sale from snap on online, no more with the local dealer. And I even offered to by CP tool Addicts pair. No dice.
Knipex