How To Use The Glowforge Passthrough Slot
HTML-код
- Опубликовано: 13 сен 2024
- Join the Flock TODAY! Purchase our new course and enjoy FREE access to the Oak & Lamb Flock (our private Facebook group) through May 31st: www.oakandlamb...
This is for all you Glowforge lovers out there. If you have the Glowforge Pro and want to use the Passthrough Slot, this is the video for you! We love giving education on how to use the Glowforge, so if you're new to it, you've come to the right place. This is a great Glowforge for beginners video.
Supplies Used in This Project:
- Get Your Glowforge Here: glowforge.us/r...
- MDF Board: bit.ly/3p7EqfB
Subscribe For New Videos! / @oakandlamb
Contact Us Here: hello@oakandlamb.com
Find Us Here:
Website: www.oakandlamb.com
Instagram: / oakandlamb
Facebook: / oakandlamb
Great video, very well done!
This video was perfect to walk me through my first pass through project! Thank you!!
Than's for the tutorial!
Thank you
Great Job, Thanks!
I just followed your tutorial step by step while I cut my board and it was sooooooo easy and smooth. Thank you so much for sharing!
Thank you for this
Thanks so much!
Love this toroidal!! I'm keeping all these Glowforge videos in my back pocket for the time I can get my hands on one. Thank you very much Becca!!
💙👍🥰💝💙👍🥰💝
You are so welcome! We're so glad you enjoy them, Lorraine!
Okay! This was INCREDIBLY helpful!! Thank you!! ❤
Thanks so much! You made that easy. I was worried about using the pass through.
Thank you for the wonderful video!!! Your image was too adorable! Your apron is super cute too!
Don’t tempt me with equipment I cannot afford 😹😜 Love Oak & Lamb Love The Flock 🎄 Merry Christmas Eve To All
Merry Christmas to you too, sweet Heather!
Thank you so much for posting!
Our pleasure! Thank YOU for watching and commenting!
Before the material starts cutting, don’t we have to “set focus”? For the longest time I could not for the life of me figure out why my cuts were cutting strange or my material would move when I’d go to cut, and it was because no matter how many youtube videos I watched, no one ever mentions clicking that little button to “set focus” before you start cutting. Do we have to do this with the pass through option?
so easy! thanks for making it easy to follow
Great Tutorial!!!
Glad you liked it! Thanks so much for watching!
Can you tell me how thick your MDF board is and also, what settings did you use for cutting?
If you align it manually, will that make it be off? Or will that work, too?
How thick wAs your draft board please
How thick of material can you send through?
Good question! Half an inch :)
Hi, and thanks for the demonstration. For an unknown reason my brand new Glowforge Pro did not do an amazing alignment job at all. I went through the exact same process, but with white acrylic. I had to make large engravings of detailed figures for a museum, and each of four passthrough sections took an hour apiece, meaning four hours total... and there are gaps between the four sections ranging from 1 to 2 millimeters. Do you suppose it could be due to the whiteness and reflectivity of the acrylic?
Hey, did you mask the white acrylic?
This happened to me. Haven’t used it for 2 years because they were dating my design didn’t have enough points for it to register when it had way more vector spots on it and details than this