Glowforge Aura Engrave Settings + my first cuts!
HTML-код
- Опубликовано: 29 авг 2024
- With the new Glowforge Aura, I’m sharing my first cuts and laser engrave settings! What would you like to see me make on the Glowforge Aura? Leave a comment below!! 🧡
⚡️ GLOWFORGE AURA ENGRAVE SETTINGS ⚡️
➡️ www.confetetie...
🚀 LAUNCHING SOON: 'Create & Elevate' -- the only online membership tailored specifically for Glowforge Spark/Aura users!
✴️ JOIN MY MEMBERSHIP HERE! www.confetetie...
MATERIALS USED
Digital caliper amzn.to/3sC91GJ
Bamboo utensils amzn.to/3s9R41G
Pinewood coasters www.michaels.c...
Square cork coasters amzn.to/3qhNpi1
Circle cork coasters amzn.to/3rX7UAQ
Acacia utensils amzn.to/3s4Hu0e (sometimes I’ve found better ones at HomeGoods)
Chipboard amzn.to/3Yv5h5A
Masking tape amzn.to/3Oyx40f (I did not mask any of these, but here's what I like to use to prevent burn marks)
MANUAL MODE
More about Glowforge's Manual Mode: support.glowfo...
PURCHASE THE AURA HERE
amzn.to/3OToWZO
www.joann.com/...
www.michaels.c...
💰 Get $500 Glowforge Pro or $250 Glowforge Plus with this link: glowforge.us/r...
➡️ ENROLL IN MY BEGINNER’S GLOWFORGE COURSE TODAY: www.confetetie...
➡️ Introducing my new course: "Designing Gift Tags for Beginners" 🎁🔖 Whether you're a Glowforge newbie, crafter, maker or small biz owner, this course is your key to getting started designing your own files.
✦ MORE OF RACHEL :) ✦
Etsy: www.etsy.com/s...
Instagram: / __rachelestrada
Blog/Website: www.confetetiev...
*For business inquiries, please visit my website or email me: rachel@confetetievents.com
LINKS: Some links are affiliate links which means I am able to make a small commission if you decide to purchase through my links. Thank you for supporting my channel by shopping through my links!
This has to be one of the most helpful videos on the Aura. Extremely helpful
Thank you, this means so much! Happy Holidays!
I would love to see cut settings for different types of woods as well as acrylics
Thank you for showing the whole process! This is an awesome video. 💚🧜♀️💜
Amazing video! So down to earth. I love that I know I can use any material as I don’t want to buy a company ‘s very expensive material($22 per sheet). Thank you so much
You are so welcome!! Thank you for your kind words! ❤️
That was very informative, thank you. I just set up my Aura today and this is exactly what I needed.
Thank you, I’m glad! Good luck! ❤️✨
Thank you for sharing your settings.
Best video and very informative! I've been searching forever and finally find you! :) Thank you!! What is the font you use for "grandma's kitchen' please
Thank you, this means so much! 🤗 Here’s the font I used: creativemarket.com/ThePaperTown/2467664-Marshmallow-Handwritten-Font
@@confetetievents thank you for the quick response 🙏🏽🩷
What are the settings you used to engrave a photo onto bamboo lid
Can you make suede tags for hand knit items with the Aura?
I folllwed your guidance for a bamboo spoon, adjusting the size and it didn’t even engrave it? I don’t want to break the machine
Hi there! Apologies for the late response - have you measured the thickness of your spoon? Sometimes it doesn't engrave at all if the spoon is too far away from the laser due to the measurement inputted. Feel free to send over any screenshots to my email rachel@confetetievents.com and I'd love to help you!
How did you know what setting in manual to choose? Just trial and error?
Hi!! Yes, definitely trial and error. I also have the Glowforge Pro, so I took the settings from there and it kinda helped guide me for the settings for the Aura. Hope this helps! Workin’ on more settings for ya!
I’m try to cut a file in the aurora but is coming out dark really dark how can I change that
Hi there! You can adjust the settings (power and speed) ever so slightly so that the engrave doesn't come out too dark or deep. Feel free to send over any screenshots to my email rachel@confetetievents.com and I'd love to help you!
Can you help with a bamboo lid for the glass soda cups? What settings?
Hi there! Does the bamboo lid come off? If so, the engrave settings for bamboo (speed 60, power 5, lines per in. 160) should work the same. Just make sure to get the thickness and input as an uncertified material.
What type of microphone is that?
I was wondering how thick can I do a keychain? i would like to use a photo of my husband and I sticker paper and apply that to wood or acrylic? Thank you.
oooh this sounds fun! Will look into this! ❤️
How about 1/4” birch