Pls for the mamba stark ,i have a quadcopter am working on that i will be adding extra features and it will require one more motor, is there any space in the esc for that extra motor?
I fully don't expect a response, the others never did. I have a question - I got back into the hobby around 2016 and had some life happen, where I couldn't afford to stay in the air. Recently got some new motors, updated my flight board and now I can't fly. I read some where that my flight board (SP f3) is no longer viable and requires too much CPU usage with current beta flight. I use fly sky unfortunately, haven't been able to afford qx 7. I really need to get back into the Air in order to improve my mental health. My question is what flight board should I replace my current one with? I'll definitely check out the items you recommend
@@DroneMesh I am using the SPF3 6 acro DOF flight board, racerstar 20a 4 in 1 esc, matek PDB (with a cap), fly sky x6b Rx. I had an issue when I power looped or full throttled the quad would act erratically. (Gyro disabled)As soon as I was inverted or full throttled the quad would blast straight down to the floor and motors would spaz out. Even after I turned my Radio off, failsafe wouldn't function. Very dangerous and had to step on the quad to remove xt60... Even though it passes function test w/ props removed. Everything functioned fine bl heli suite unless I turned my quad or something then it would act erratic again. Thanks 😊
You are really great at what you do for us. How do you edit your video to have a video of you talking and another video running on the same screen. What edit soft ware do you use.
What kind of noise issue, on the iFlight SucceX-E V2, BLheli had it in my 5 inch and haven't noticed any issues. I have looked at my blackbox files and didn't notice anything, but I'm new at reviewing the files so I probably missed it. In the width of a soccer field I'm able to get to 80mph before I run out of space, not sure the max speed. Flies better than the original stack, Hawk5. I did notice the price go up, like you said everything is going up. I didn't like that I had to flip the ESC so the capacitor would fit and then fix that in BLheli,
5" quads are so overrated! 20-30 minute drive time to even get to a semi OK spot for me. 3 minutes to get to several great spots to fly 3" and below micros that all blow away that semi OK 5" flying place. Your video was all about 5" and 30x30mm parts, except for few 20x20mm stacks. I fast forwarded through the 5" stuff, stopped at the 20x20mm, and the video was about 90 seconds long! lol 5" are also noisy, need a ton of space to fly, intimidate dig walkers, don't corner even close to as good or aren't nearly as nimble as a True Toothpick quad, and I can literally fly it anywhere! I, and my friends, all prefer 3" and below... a lot of guys love those whoops! 😎🤘
@@catpervert Yeah, I could care less about GoPro footage! So, I'm gonna take HD footage and do what with it? Post it so I too can have a RUclips channel with 68 subscribers? And, it gets watched once by me and then sits on my hard drive collecting virtual dust. I'd rather go fly again than watch my flights or edit them to make something to post. If you think about it really hard, there's no point in that HD footage...IMO, what does it do for me? Nothing! Plus no person that knows anything about photography is happy with all of the fish eye distortion and that curved horizon. That's unacceptable to me and anyone really into photography! No regular, non specialty lens, for a DSLR camera will ever have that type of distortion and be considered a quality lens! GoPro's suck for that huge reason...they come with crap lenses! But, IMO I think getting HD footage is a total waste of time and money. There's no real good purpose for it. . Sure the reviewers make it look so cool to get that HD footage because they have successful RUclips channels! It has a purpose for them. If I want my friends to see HD FPV footage, there's 500,000+ videos on RUclips for them to watch.
bit.ly/3rmWB0r
bit.ly/2UBUVRm
bit.ly/36Ns3vv
bit.ly/36KqcIV
bit.ly/2mju3HT
bit.ly/3kJF9SP
bit.ly/3wNNWp0
bit.ly/3B90meq
bit.ly/3rvb3Ut
bit.ly/2ThZt23
bit.ly/3d6TMcG
bit.ly/3ktXRO3
bit.ly/3wUeHIA
bit.ly/2UPQDcm
bit.ly/3riw701
bit.ly/3cRDZA9
bit.ly/36Jh1a7
bit.ly/36IWG4D
Pls for the mamba stark ,i have a quadcopter am working on that i will be adding extra features and it will require one more motor, is there any space in the esc for that extra motor?
Just started with FPV i have the TX12 radio master elrs controller can you recommend a budget build DJI DIY build .
Thanks for your building video, hope you back to YT oneday again!
Could you please make a video for buying parts(FC, ESC, MOTORS,BATTERY...) for manned craft or heavy lift drone
0
congratulations you won hit me up via the number above for INTERACTION on claming prize..
Sir it possible to build the drone with Arduino and rp2040microcontroller
Hey nice video there but for a beginner flyer would you recommend the jumper t lite or radiomaster tx12?
I recommend the radiomaster tx12
Hey Sam nice video there but are you gonna show the bf and flight videos for the ultimate budget 2021 build ?
congratulations you won hit me up via the number above for INTERACTION on claming prize..
Hows the aikon race dragon as an esc? Seems like a decent price, and its aikon, so probably good reliability. But what about noise?
Thanks for watching 👏...Contact 📥⬆️ something special for you
What's the best way to find compatible parts?. Looking to do my first build. Any good resource recommendations?
Contact ⤴️ something special for you
I think this is the videos that I needed
I fully don't expect a response, the others never did. I have a question - I got back into the hobby around 2016 and had some life happen, where I couldn't afford to stay in the air.
Recently got some new motors, updated my flight board and now I can't fly.
I read some where that my flight board (SP f3) is no longer viable and requires too much CPU usage with current beta flight.
I use fly sky unfortunately, haven't been able to afford qx 7. I really need to get back into the Air in order to improve my mental health.
My question is what flight board should I replace my current one with? I'll definitely check out the items you recommend
Whats your complete stack inside?
@@DroneMesh I am using the SPF3 6 acro DOF flight board, racerstar 20a 4 in 1 esc, matek PDB (with a cap), fly sky x6b Rx.
I had an issue when I power looped or full throttled the quad would act erratically. (Gyro disabled)As soon as I was inverted or full throttled the quad would blast straight down to the floor and motors would spaz out.
Even after I turned my Radio off, failsafe wouldn't function. Very dangerous and had to step on the quad to remove xt60... Even though it passes function test w/ props removed. Everything functioned fine bl heli suite unless I turned my quad or something then it would act erratic again. Thanks 😊
congratulations you won hit me up via the number above for INTERACTION on claming prize..
You are really great at what you do for us.
How do you edit your video to have a video of you talking and another video running on the same screen. What edit soft ware do you use.
Thanks for watching 👏...Contact 📥⬆️ something special for you
What kind of noise issue, on the iFlight SucceX-E V2, BLheli had it in my 5 inch and haven't noticed any issues. I have looked at my blackbox files and didn't notice anything, but I'm new at reviewing the files so I probably missed it. In the width of a soccer field I'm able to get to 80mph before I run out of space, not sure the max speed. Flies better than the original stack, Hawk5. I did notice the price go up, like you said everything is going up. I didn't like that I had to flip the ESC so the capacitor would fit and then fix that in BLheli,
congratulations you won hit me up via the number above for INTERACTION on claming prize..
Pretty nice stuff there, Sam! 😃
Thanks a lot for the video!
Stay safe there with your family! 🖖😊
Thanks for watching 👏...Contact 📥⬆️ something special for you
Out of the topic.
I am just looking to links at the description and i saw at PC specs you wrote gtx 2060 but it need to be rtx 2060 :)
congratulations you won hit me up via the number above for INTERACTION on claming prize..
Pls do review pyrodrone hyperlite freeranger
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅
Hi.. can you please explane what does MK 1 or 2 or 3 code stand for in mamba FC stacks. Thanks!
The generation witch one is newest design.
Its the ESC's that you should take note of most.
@@DroneMesh thanks for the explanation! does BLS and BL32 have a recognized difference on performance? thanks
Thanks for watching 👏...Contact 📥⬆️ something special for you
Love your videos. Always keeping it real.
Thanks for watching 👏...Contact 📥⬆️ something special for you
Could you read out the product your talking about for the ones with bad eyes and explain everything
congratulations you won hit me up via the number above for INTERACTION on claming prize..
great vid again buddy thank u so much
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅
One day I wanted to fly so bad I chucked a 20x20 on a 7 inch that was 2years ago and she's still going strong 🤷🤷🤷🤔🤣
congratulations you won hit me up via the number above for INTERACTION on claming prize..
what happened why 8 months no new videos are you OKAY Mesh ??
You missed kakute tekko32f4 45amp 128khz pwm frequency
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅
Great vid but don't you think this is not a really budget video? A 60$ esc? Even tho it's a good one this list is supposed to be budget
Thanks for watching 👏...Contact 📥⬆️ something special for you
Awesome vid :)
congratulations you won hit me up via the number above for INTERACTION on claming prize..
I am the one with 200th like... 😂😂 May be someday I will be the winner of your give aways but for that you have to send the product to India.
Contact ⤴️ something special for you
5" quads are so overrated! 20-30 minute drive time to even get to a semi OK spot for me. 3 minutes to get to several great spots to fly 3" and below micros that all blow away that semi OK 5" flying place.
Your video was all about 5" and 30x30mm parts, except for few 20x20mm stacks. I fast forwarded through the 5" stuff, stopped at the 20x20mm, and the video was about 90 seconds long! lol
5" are also noisy, need a ton of space to fly, intimidate dig walkers, don't corner even close to as good or aren't nearly as nimble as a True Toothpick quad, and I can literally fly it anywhere! I, and my friends, all prefer 3" and below... a lot of guys love those whoops! 😎🤘
That just means 5" isn't for you, not that the 5" drones are overrated.
@@cloudwind23 5" is practically the only size people talk about... almost! lol
@@noforyoutubepremium3108 pull on it a little more itll go from 3'' to 5''
5" can lift GoPro
@@catpervert Yeah, I could care less about GoPro footage! So, I'm gonna take HD footage and do what with it? Post it so I too can have a RUclips channel with 68 subscribers? And, it gets watched once by me and then sits on my hard drive collecting virtual dust. I'd rather go fly again than watch my flights or edit them to make something to post. If you think about it really hard, there's no point in that HD footage...IMO, what does it do for me? Nothing!
Plus no person that knows anything about photography is happy with all of the fish eye distortion and that curved horizon. That's unacceptable to me and anyone really into photography! No regular, non specialty lens, for a DSLR camera will ever have that type of distortion and be considered a quality lens! GoPro's suck for that huge reason...they come with crap lenses! But, IMO I think getting HD footage is a total waste of time and money. There's no real good purpose for it. . Sure the reviewers make it look so cool to get that HD footage because they have successful RUclips channels! It has a purpose for them.
If I want my friends to see HD FPV footage, there's 500,000+ videos on RUclips for them to watch.
hi there
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅
Hi bro
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅
Ay first
Thanks for watching👏..you have been selected among our shortlisted winners from our previous giveaway, Contact the number above ☝️✅