Hi, it is actually made of solid stainless steel(sus 303 I assume) including slide, frame and most other parts as well. So it weighs just like real one.
It is a very beautiful kit, but sadly the manufacturer fked up the marking. If you pay attention, the marking is totally wrong, it is much bigger compare to Real deal. Sad to see a 2000usd very limited kit get messed up like that.
Your saying the marking on right side of the frame just above trigger right? In real steel, I saw both German frame and US frame versions of P229 Elite and US version had smaller font size but yeah I knew that marking is the fake point of this kit. Also I heard there is aluminum frame version of this model but haven’t seen yet. Hoping this kit maker will release revised version not the fked up marking one lol.
@@kimchiman2934 Yep this p229 kit is based on US version marking, but no matter US or German marking this kit marking size is much larger than real p229. I originally pre order this kit as well. But once I saw the marking I contacted my retailer for cancel order. It is not acceptable for me when I paid 2000usd for a fked up marking like this. I expect high quality and attention to detail with this price tag
@@kimchiman2934 I have seen both full stainless kit and aluminum lower frame kit, both marking fked up on the slide. I think they just use the inokatsu p226 size marking template directly onto this kit without thinking. Since not much Taiwan manufacturers produce steel kit nowadays , it could be the same manufacturer
@@kimchiman2934 At 3000 usd price point is just too much I will pass seriously... Even mine VFC G28 change to all real HK parts like G28 handguard, buffer tube and stock set, grip etc cost less than 3000usd...
@@Doentogodnehrfovosb 국내 수입되는 키트들이 비정상적으로 비싸지는 것이 문제예요. 지금 이 영상에 달린 미국인 댓글보면 거기서는 2000 불에 구매한다는 내용 있습니다. 이거 정식 수입하는 사이트 가보시면 키트만 335만원에 팔고요. 심지어 대만에서 생산해서 판매하는데 훨씬 먼거리 미국에서는 2000불이고 한국은 335만원 인것입니다 ㅋㅋㅋㅋ 참 가슴아픈 현실입니다
@@jjohnson9822 U sure? Fully steel (including steel frame, not aluminum frame model) model should weigh little more. Also gbb airsoft’s magazine is way much heavier than real mags without ammunition.
How much does it weigh?Price?$$Thanks
Excellent replica, 👍best wishes from England 🏴
Indeed. Thx
Beautiful pistol.
Is the slide and frame actually solid stainless steel, plated metal, or a shiny plastic that resembles stainless?
Hi, it is actually made of solid stainless steel(sus 303 I assume) including slide, frame and most other parts as well. So it weighs just like real one.
@@kimchiman2934 where can I buy This?
@@kimchiman2934 Where I can get one?
@@kimchiman2934do you or will you make gel blaster versions?
블로우백 엔진은 WE를 이식한건가요? 마루이 226보다 반동이 좋아 보이네요..
말씀하신대로 반동증대를 위해 WE 노즐 사용중 터져버려서 가더(마루이 226용) 옵션으로 장착 후 사용중입니다. 반동은 일반 마루이 226 보다는 좋을수 밖에 없는 것이 본체 상/하부 스틸에 가더레드가스 WE탄창에 넣고 작동시키니 그런것 같아요
It is a very beautiful kit, but sadly the manufacturer fked up the marking. If you pay attention, the marking is totally wrong, it is much bigger compare to Real deal. Sad to see a 2000usd very limited kit get messed up like that.
Your saying the marking on right side of the frame just above trigger right? In real steel, I saw both German frame and US frame versions of P229 Elite and US version had smaller font size but yeah I knew that marking is the fake point of this kit. Also I heard there is aluminum frame version of this model but haven’t seen yet. Hoping this kit maker will release revised version not the fked up marking one lol.
@@kimchiman2934 Yep this p229 kit is based on US version marking, but no matter US or German marking this kit marking size is much larger than real p229. I originally pre order this kit as well. But once I saw the marking I contacted my retailer for cancel order.
It is not acceptable for me when I paid 2000usd for a fked up marking like this. I expect high quality and attention to detail with this price tag
@@kimchiman2934 I have seen both full stainless kit and aluminum lower frame kit, both marking fked up on the slide. I think they just use the inokatsu p226 size marking template directly onto this kit without thinking. Since not much Taiwan manufacturers produce steel kit nowadays , it could be the same manufacturer
@@KarlHensen man this shit says over than $3000 price tag in Korea thanks to fcked up dealerships here haha
@@kimchiman2934 At 3000 usd price point is just too much I will pass seriously... Even mine VFC G28 change to all real HK parts like G28 handguard, buffer tube and stock set, grip etc cost less than 3000usd...
Is this replica sold in Europe by any chance?
At the moment, I’m afraid not. But I’m pretty sure some distributers like Redwolf or WGC had sold before and shipped worldwoide.
Where can you purchase?
I’ve bought at my local shop, and I can give you URL where you can buy, but I’m afraid rather the shop would ship overseas or not.
No problem, thanks for your reply
Can you send us the URL pls
예술이다...
옛날부터 스틸킷 권총 마련하는게 꿈인데 어림잡아 기본 총까지 해서 얼마정도 드나요?
스틸도 편차가 크게 납니다. 저렴한 이노카츠 콜트가 백 정도이고 비싼건 사백 언저리까지 올라가는데 가격 생각했을때 그것들이 제값을 하는지는 의문인것도 사실이지만 결국 자기만족이니까요ㅠ
@@kimchiman2934 이노카츠가 저렴한거였군요 ㅠ
@@Doentogodnehrfovosb 국내 수입되는 키트들이 비정상적으로 비싸지는 것이 문제예요. 지금 이 영상에 달린 미국인 댓글보면 거기서는 2000 불에 구매한다는 내용 있습니다. 이거 정식 수입하는 사이트 가보시면 키트만 335만원에 팔고요. 심지어 대만에서 생산해서 판매하는데 훨씬 먼거리 미국에서는 2000불이고 한국은 335만원 인것입니다 ㅋㅋㅋㅋ 참 가슴아픈 현실입니다
스텐 스틸킷 ALC사 제품이죠?
네 파파고 설계베이스에 ALC 제조라고 알고있습니다
답변 감사합니다! 항상 잘 보고 있어요
@@furylee2813 감사합니다~!
Weight?
Hey sry for late reply. It weighs 1300g including magazine.
@@kimchiman2934why so heavy? real ones weigh roughly 950 grams unloaded.
@@jjohnson9822 U sure? Fully steel (including steel frame, not aluminum frame model) model should weigh little more. Also gbb airsoft’s magazine is way much heavier than real mags without ammunition.
@@kimchiman2934 950 grams no magazine so maybe with mag 1300
안녕하세요^^ 혹시 이대로 구매 가능할까요? 아니면 영상 올려놓으신 제품 중에 혹시 판매 생각있는 제품 있으신지요?
안녕하세요 영상 속 물건은 제가 워낙 아끼는거라 팔 것 같지는 않고, 다른 물건들중 혹시 팔게 된다면 다시 말씀드리겠습니다 ~ !
Need to install fake firing pin.