Solid State Logic | SSL Origin Install | The Last Day! - Day 6
HTML-код
- Опубликовано: 11 окт 2024
- In this video, we finish setting up the last two patch bays, did a little trouble-shooting and we are finally up and running. We also discovered that one of our pieces of gear was defective!
Gear I have in my studio. I get all my gear at Sweetwater. (affiliate links). Thank you for supporting my channel!
SSL Origin - imp.i114863.ne...
SSL Fusion - imp.i114863.ne...
SSL UF-8 DAW Controller - imp.i114863.ne...
SSL UC-1 - imp.i114863.ne...
Empirical Labs Distressor - imp.i114863.ne...
U/A Apollo x16 - imp.i114863.ne...
Switchcraft Patch Bay - imp.i114863.ne...
Wes Audio NG Bus Comp - imp.i114863.ne...
Wes Audio Titan - imp.i114863.ne...
Wes Audio Dione - imp.i114863.ne...
Black Lion Audio Bluey - imp.i114863.ne...
This channel is all about my journey of setting up and mixing in an analog / hybrid fashion. Come with me as I purchase and set up all the gear that is involved with my studio. If you are into hybrid and/or an analog workflow then welcome!
I also have a website with more content & my mixing services
www.mixingmusi...
For more mixing, mastering, recording training visit
www.homerecord...
If you are interested in learning how to mix music using a DAW and plugins only then check out my mixing membership "Mixing Made Easy".net.
www.mixingmade...
For "in the box" mixing, mastering, plugin demos etc.. visit my RUclips channel
/ homerecordingmadeeasy
Where I get all of my gear, Sweetwater of course! They have the very best customer service in the business! The next time you need anything for your studio, please consider using my affiliate link below. You don't pay a penny more and you are helping support what I do here. I thank you in advance!
imp.i114863.ne...
You two pioneers can hardly know how helpful you are to people like me. For weeks on end I have been putting together a hybrid studio such as you are building, and wiring it all together has been particularly challenging to me. Yesterday, September 7, 2021, I discovered your videos, and since then I have happily been glued to them, and taking copious notes, knowing that at last, by watching how you are doing what you are doing, and applying that information to my specific studio development situation, I will now have the help I have been needing, but which can be found nowhere else on the internet except in the awesome videos you guys are making. I simply cannot thank you enough! Most sincerely, Jim Cummins
Thanks Jim! Welcome to the family here, and good luck with your studio build! Glad we can help
What a bummer that we had a defective reverb unit! I learned a lesson that's for sure!
double check the power supply- that it is correct for the unit. the seller may have included the wrong one. Some devices of that era used a 9vAC psu, and with a 9vDC unit the LED's may still power, but the audio circuit wouldn't work. Alesis and Lexicon are notorious for this.....
Yes, probably the wrong power supply, I had the same issue with mine.
I watched all the install video's. And I want to thank you guys for these video's. This was amazing the fact that you do this just to help people is really unbelievable. SSL should have sponsord these video's. You have done what the product manufacturers should have done. I hope that at least they link your playlist on there product page or something like that. Again thank you so much for these video's.
Actually, SSL said they have no interest in in sponsoring my videos or being involved in any way. I approached them when I first purchased the console and they are simply not interested. I guess you need to be CLA or someone at that level to be noticed...LOL. No big deal, we are having fun helping other with or with out any help from SSL
The whole install series has been great. Reminds me of James Lugo's videos from way back when, which was a cool thing to kinda go through with him.
Thanks for watching!
Gentlemen,
You greatly underrate, the quality and benefit you bring to all who chose to watch and learn from your experiences. It is GREATLY appreciated! Thank you! 😊
Wow, thank you!
Thank you!
THIS IS AWESOME FOR HIM TO SHOW US HOW TO HOOK UP SSL DESK AND PATCH BAY.. I AM SO HAPPY TO SEE THE PROCESS.......
Great! I am glad you're loving the series! Thanks for the support
This has to be the best series of SSL on RUclips sphere... One thing I learned from long time ago when I started collecting outboard gear it's not to buy anything second-hand save for it by brand new congratulations on the setup I appreciate you for doing this
Glad you enjoy it! vThanks for the kind words!
More great stuff David! Really been fun watching the progression and contrasting your experience with my own setup experience. I am SOOOoo Happy that the diagrams have been helpful during your install!!! . Very generous of you to mention it to your followers. If anyone would like to have the diagram files, just let me know! I have just returned from vacation and I will be sending you a note to coordinate that Zoom call.... Cheers, Terry
Thanks Terry! I am happy to let people know about your studio! I see you are about 4 hours from me. I would love to take a tour of your studio sometime....maybe take a road trip!
Forgive me for LOL. But when you had to crank a knob on the SSL Fusion all the way just to tell that it was working made me chuckle. Haha
I did not crank it all the way up...LOL....the Fusion is a very subtle piece of gear. Not sure how much I really dig it. I need to play with it more and there will be a review coming soon. So many people on YT love it but I think I would like to have a box with more "color". Not quite sure yet. Stay tuned!
I, as a subscriber, appreciated the videos, and also love the down and dirty approach. Don’t let others break your balls over it.
Thanks for the sub!
I for one am grateful for the process! Thanks 💯😊
Thank you very much.
I’m really enjoying these videos.
I miss the clock being in the shot! It was fun to watch the time lapse and how long things were taking during setup
Glad you are loving the video and they are helpful! Thank you for your support
these video series are really fun to watch and really show how much it takes to install a analog console!!! Cant wait for the future vids in the future!
Thanks Ian! Videos are already scheduled to go live later this week!
Thank you so very much for these videos! I'll be building a new studio and going hybrid and I severely underestimated how much cabling and how many patchbays I needed. Also gonna have to hire help to do somethings I thought I could do myself. Thanks again!
You are very welcome! That is exactly why I started this channel....to help other people. Good luck with your new studio build!
I also randomly have the UA I/O Matrix issue as well. Only started happening after I converted to Thunderbolt. Never happened when my Apollo was set as FW.
interesting thanks for the info
Hi, I find this super interesting! To see the install from start to finish in such a deep realistic way is very unique and educational, keep up the good work!
Thank you so much!
Great video, very informative.
Also, Time marker 24:04 maybe the answer to the sorcery on the DAW (the paper sheets on top of the turntable)
Just a fan in the room....LOL
just jumping in to say ive been following this because ive been dreaming about getting this board since i saw it announced and before you started this series there was no in depth content on the board, so thanks for doing this, now for me i just need to figure out how will i ever be able to afford the board :) maybe make a tutorial on that
Certainly......financing via a leasing company via Sweetwater....done!
Oh, I'm so jealous. I want an Origin as well. Sigh... But I am glad for you. Produce hit after hit guys. Woohoo!
Thank you very, very much! I really appreciate your support
I honestly dig the setup videos, Love the process of your setup and it gives me new ideas of my setup with a console. Thanks
Awesome, thank you!
With so much of your connections on the patch bays, especially with the D25 connectors have you considered Flock Audio? All you need is just one "Patch XT". You had opportunity to get rid off all those hanging cables, plus make it more efficient in the long run.
I looked at Flock Audio and I would need more than just one and they are $2500 each so I opted for the standard patch bays. Maybe down the road I'll check them out
Agree. Save for their new upcoming XT model 192 Points $$$. You have already spent big on the SSL, whats few bucks more :).
I did not see that they are a 192 point coming. Maybe at that point I'll look at it.
Great videos! I really enjoy watching you guys setting up the studio :D And I have had similar experiences with my Apollos: the Console tends to forget settings every now and then (even when it pretends that the settings are loaded), so you have to reload. Also I have another issue with I/O: When I use an I/O-plugin in Logic, I first have to insert the I/O-plugin in Logic, select the routing within the plugin and then I have to move the plugin to another plugin-slot, so that audio actually flows. Could be a Logic problem though.
As an idea for your future videos: it would be great to see the workflow using the Origin with the UC1 plugin compressors/gates (compared to mixing on an old SSL desk with built-in analogue dynamics). Thaaaanks a lot and keep up the great work!
Thanks for the suggestion!
Yes bad news about the lexicon, but as you say it’s only a few hundred bucks, so it’s not terminal. I’ve really enjoyed these videos, and your enthusiasm for explaining everything as you’ve gone along! I’d really love to see a video on the Ssl fusion at some point down the road. Good luck with everything.😎👍🎶🎹
The fusion is coming soon as all of my current gear. I will do a full review on each
E-bay will get your money back for you.
Good job men it’s been an awesome series of vids. CheerZ I’d buy you guys a beer if I could
Thank you so much!
I love this series. Great info! I was wondering if you could post what cables you bought and a link to the site you got them from? Thanks and keep up the great videos!
Most of the cable are JumperZ & Hosa Pro d-sub cables. All purchased at Sweetwater. Here is my link if you would be so kind to support us. Keep that link on your desktop and use anytime you shop at SW. I get a tiny commission but you don't pay anymore for your purchases! Thank you in advance
imp.i114863.net/c/2224454/792013/11319
@@MixingMusicAnalog Sorry to bother again but is TTS compatible with TRS patchbays? I hate to have to buy what I don't need. Thanks!
There's a plug in to add in studio one from uad that forces to restart the whole session from the console..
Really? What one is that? I need to check that out.
How about a "RUclips Made Easy" video? I'd like to know how to blend video from two different sources - like when you have a small screen in one corner of the full video. Also, how do you make sure the audio lines up with the video when you don't record both to the same media; for instance, if I record audio to Studio One and the video to the card in my camera. How do I sync them? Thanks. :)
That video is on the "list" so it will come soon. Thanks for the suggestion
@@MixingMusicAnalog Great, thanks.
Great videos ! Love It ! A dream studio !! Congrats
Thanks so much!
Love these videos and love this channel! You guys are great and I've become a loyal subscriber. Cheers!
Awesome! Thank you!
A very inspiring process...keep going!
Thank you so much!
Very difficult job and not so easy to work out. Impressive piece of work. I hope it's worth the amount of money and time spent on this project.
Worth every penny!
Thank you for doing this video series.
My pleasure! More videos coming soon!
That's a lot of real estate for the screen size. Where did you get your acoustic panels? I'm interested in buying for my small 9.75ft x 10ft small bedroom. Has flutter slapback in the mid range about 1100hz or 1200hz.
Here is where I get all my acoustic treatment
bit.ly/3rdhoFj
Still loving this series. However, I missed the bit where you decided to put the UF8 in the console and (if I remember correctly) which meant you had to move the monitor section. I remember you weren't happy about that configuration at first?
Yea, I installed that one morning and did not bother filming it. Seems like that would be even more "boring" than the install set of videos....LOL. I am not thrilled with moving the master section up like that but considering that I can control plugin parameters and such it's nice to have that right in front of you. There is always some compromise. I think it's a matter of getting used to it
Thanks for the video! Was wondering why not buy the Tegeler Manifaktur Konnektor instead for all the patchbays. Wouldn't it work better and smoother to install?
I dont know anything about the Tegeler Audio piecer you mentioned
@@MixingMusicAnalog if you got time you can check it out on their webbsite. I know you did some review of their stuff a while ago. It is a little bit pricey, but very handy.
hi thanks for the fly on the wall videos, im a nerd so I find it interesting. Question, which has no importance, but, what room in your house should that be? Is it like a dining room or cellar? Wait you guys say basement??
This is a completely finished 90 sqft family room / basement with 8 foot celings
@@MixingMusicAnalog thanks guys. Looking forward to seeing you when you’re in the workflow and working on music. Thanks for the videos.
Hello Again David.... I have a Lexicon MPX200 that I am not using in the Studio anymore.... Let me know if you can make use of it... I'll send it to you!
Thanks, Terry! I would love to try out the Lexicon to see how it compares to using plugins for reverb and send them to the board to blend it. How much are you asking for the Lexicon?
Question - when you are mixing on your Origin, do you use reverb plugins and route them out to the board? to blend them in? What is your process
UA has amazing reverbs and delays... Maybe just get an older cheaper Apollo and run that into your Auxes and use the UA effects like you would hardware units. Just a suggestion.
Already done! Keep watching the channel videos You'll see that video.....Thanks!
Loving these videos David. So my question is, does it really make a difference going thru gear during tracking compared to mixing in the box? Is it a big step up...a game changer if you will?
Yes it me it is. its not even close
Do you use the Avantone or Behringer C50A? are they similar to the Auratones? I'm looking for one to listen to mono and can't decide ..
Avantone
Man. Too bad that Apollo glitch happens. I know you’ve tested the Quantum and I really think you gotta sell them and get a few Quantum’s.
Anyways I think I would’ve put the Apollo’s and Mac mini in the rack on the right all the way down. Put the hardware items all in the left rack Or as many as you can that requires more tweaking There’s really no need to have the Apollo’s where they are now since your not touching them. Get the stuff you tweak closer to the console and at least a little closer to the sweet spot.
Keep watching the series!
thank you for doing this guys
Thanks for supporting the channel Rob!
Where you getting reverb from the guitar pedal?
Yes!
Just looking at all the wiring ,makes me want to simply my setup,lol
Tell me about it. LOl
BiG Up to Dave😊
Thanks!
What TV are you using for your monitor?
It's an inexpensive TCL I got off Amazon a couple years ago. I think I paid about $400 at the time. It's a 55'
Got the answer lol
Great!
Room doesn't sound flat need more treatment.
You can tell that from the video? So I guess when the room was professionally measured they were wrong.
@@MixingMusicAnalog You can’t hear bad treatment empty room reflection on RUclips? Not that yours is bad I hear just a empty room sound that I don’t hear from other engineer rooms that sound dead. I not a professional maybe it’s the cheap mic on the camera.
That's because the shotgun mix is literally 15 ft away which I said a few times through out the series.
@@MixingMusicAnalog Ok 👍🏽