Dude, there used to be a car painted by your father in my parents neighborhood in rural CA. It was a '49 ford painted mate rust red AND with a hand painted scene on the metal dash done by Von Dutch of a Hispanic man and his burro reacting to a nuclear explosion in the distance. The owner died of cancer, probably like the man and his burro, and the car went to one of his children.
April fools, right? Right? It's not the 1970's, why is there a SBC going into a nice Ford Model A? I'd be happier if there was a Kubota diesel going into it at this point.
Like to see a longer video. Big fan of Chip maybe get to know chip little better go for a drive or go get a cup of coffee. I think this could be a very big Channel.Hope you are doing well again a big Fan love your work and you alway seam like a great guy.
Ford had a decent body back in the day so people put a great motor back in them a small block chevy will always get you home so much cheaper to build to get some hp than a ford.
I confess my ignorance on being someone who likes old classic hot rods of this age [Model A] but not understanding something simple for to those that build these: Why do they not install a FORD engine in this FORD Model A? Why the Chevrolet engine instead of a FORD engine? Perhaps a 289 cui. or, a 351 cui.?
I sometimes think Chevy people don't Remeber that Ford came out with the V8 before chevy! Ford Engines have Won Race's for Year's, just like Chevy & Mopar's.
@@VernLeRoy1962 You are wrong. GM had the Viking and Oakland . They were the first cars with a mono cast V8 block in 1929. They were higher end cars . Ford didn't show up until 1932 . Cheverlet was absorbed by GM in 1917 and they produced the first V8 engines. They were two OHV, four cylinders bolted together.
With that Chevy engine I’m sure it will be too much horsepower, maybe you should have put a Ford engine in it rather than risking frame and drivetrain damage with the Chevy
I have a karmam gire body a 928 porsche 5 speed with a v12 motor from a 1990 bmw think you could but it all together plus mod the hell out of the body have drawing plus $$$$$
I can't belief Foose would put a Chevy in that a old Ford!! Ford people Don't put a Ford engine in a Chevy hot rods. could go with old school V8 to a 302(331 or 347) 351(408)W, 351C or a Coyote! Personal, I'd Have to put the Grandfather of V8's, the Ford flat head with a set Edlebrock heads & a edlebrock or offenhauser intake on it. agree to disagree.
MR CHIP FOOSE! WOULD YOU CONSIDER PUTTING ON SOME ( BADDD CHADDD ) CHROME ON THE BUMPERS! FROM THE CRAZIEST CAR CHANNEL ON RUclips, ALL THE WAY FROM ( NOVA SCOTIA ) CALLS HIM SELF A PROFESSIONAL!
So much drama from the Peanut Gallery! Nice hot rod Chip! Also I could not take my eyes off the car on the lift behind the Model A. Please show more of THAT too!
Nice project. I am collecting parts for a very early thirties similar project planned to be painted in 79 F150 metallic blue. I have Ford 300 inline six with an aftermarket turbo project engine almost ready that came out a generator used in a welding truck from the early 1970's.
Call Me Crazy But I Would Love To Have Just a Nice Stock Model A To Chiggity Chig Down The Street For Coffee and a Donut Or Two With The Wife and Kids!😁👍💯
why but why put a junk chevy engine in it?cmon chip i thought you were better then that!!you do all that work doing a car from scratch and and you could put least a flathead back in it!!!
Now wait a minute, You're gonna "put the motor in the engine compartment"?.......So, it's going electric or what? Did you ever "put an engine in the motor compartment"?
It seems funny to me that you Ford guys after getting a Chevy HEI distributor sing the praises of the bowtie. To me it makes no difference. Admit it though Fords are more finicky. Just saying.
it came with the truck and chevy parts are cheap,so he is not going to put high dollers into a good ford engine,when he got the junky chevy for free.js
Chip I’m very pleased to see you still building cars.
What a beautiful Truck! Always enjoyable seeing Chip in action!
Note To: Chip, FORD IN FORD, Always fits Better, Sounds Better and Runs Better! Please call The Cat in the Hat for your next FORD project. Cheers!
They say Chip has retired! Someone like this that has eaten breathed all this stuff. Will never ever retire until there last breath.😊😊😊😊😊😊😊😊
Dude, there used to be a car painted by your father in my parents neighborhood in rural CA. It was a '49 ford painted mate rust red AND with a hand painted scene on the metal dash done by Von Dutch of a Hispanic man and his burro reacting to a nuclear explosion in the distance. The owner died of cancer, probably like the man and his burro, and the car went to one of his children.
Nice to see chip has enough class to not be all tatted up!
Agreed!!!
Chip is NOT conventional, thats what separate him from others and made his name, plus encourage so many of us to be different. Respect Mr foose.😊😊😊😊
SACRALIGE!! Putting a SBC in that beautiful Ford!!
"SACRALIGE! Putting a SBC in that beautiful Ford"
Every Ford can be improved with a Chevy SBC.
(most have been)
It's for when you can't find a 429
A chevy motor in a ford😮😮😮.No boueno.
🤣 YEPPERS yep 😢
No! 😂😂
I agree with everyone else that it's great to see Chip still building cars!
Nice work, Chip!
Nice car Chip, but it deserves a Ford engine . . . not Brand X.
so true
Very nice deuce you one lucky son of a gun but it went to the right guy!
Drop a Ford in a antique Ford and drop the music from the video
Chip is king of cars 😊
👍🏴😁✌️
All good but why don’t you protect the fenders ? Paint work ?
I just found this channel today!
Here’s my tip for the day. Lose the music, I can’t hear Me Foose and the music, pick one!
Great vid!!!! 👍👍
Frankenstein !!! A Chevy engine in a Ford AAARGH
Upgrade.
When you can't afford a real Ford 429, Shevy has it covered
They've been doing that combo for at least seventy years!
Its the easy way out
Yes the hot start king of motors . Left me on road more that once
2:32 - Nuts! Flex plate instead of a flywheel and P/P.
LOVE me anything Foose!
Me too!!!
April fools, right? Right?
It's not the 1970's, why is there a SBC going into a nice Ford Model A? I'd be happier if there was a Kubota diesel going into it at this point.
for sure!!!lazy maybe?
It would be fun to work with great parts, smooth floor, clean shop, all the best stuff (forklift) I am envious!
What's the freight train song? by whom? Thanks!
Like to see a longer video. Big fan of Chip maybe get to know chip little better go for a drive or go get a cup of coffee. I think this could be a very big Channel.Hope you are doing well again a big Fan love your work and you alway seam like a great guy.
Whatever makes this car go fast!
You don't have to do your own work.Everybody else does it for you more.Remember you'll be selling them paintings and stuff at the next show because
Where's the shop foreman , Josh??
There should not be one negative comment on this video. The man is THE MAN period.
Of course they polished the motor-mount bolts.
Doesn't everyone ? LOL
It’s going to be a neat little truck …. With a ton of horsepower! 💪👍🏼
Short but very sweet chip 💕
Quite common to put a Chevy engine in a Ford street rod. Insee that a lot. I've been told it has to do with the physical size of the block and heads.
Ford had a decent body back in the day so people put a great motor back in them a small block chevy will always get you home so much cheaper to build to get some hp than a ford.
You are the number one
Why do you have a Chevy engine in a Ford truck ?
Agree
I confess my ignorance on being someone who likes old classic hot rods of this age [Model A] but not understanding something simple for to those that build these:
Why do they not install a FORD engine in this FORD Model A? Why the Chevrolet engine instead of a FORD engine? Perhaps a 289 cui. or, a 351 cui.?
Chevy motor in a Ford....More crimes against humanity.
I sometimes think Chevy people don't Remeber that Ford came out with the V8 before chevy! Ford Engines have Won Race's for Year's, just like Chevy & Mopar's.
@@VernLeRoy1962 You are wrong. GM had the Viking and Oakland . They were the first cars with a mono cast V8 block in 1929. They were higher end cars . Ford didn't show up until 1932 . Cheverlet was absorbed by GM in 1917 and they produced the first V8 engines. They were two OHV, four cylinders bolted together.
With that Chevy engine I’m sure it will be too much horsepower, maybe you should have put a Ford engine in it rather than risking frame and drivetrain damage with the Chevy
Shevy
The 6 hour lightbulb. LOL.
I have a karmam gire body a 928 porsche 5 speed with a v12 motor from a 1990 bmw think you could but it all together plus mod the hell out of the body have drawing plus $$$$$
NOOOOOO Not a Chevy in a Ford!
chips always been kind of a sell out!
I love the guy if so.@@yeahright302
over 400 horsepower for that is crazy :D
I can't belief Foose would put a Chevy in that a old Ford!! Ford people Don't put a Ford engine in a Chevy hot rods. could go with old school V8 to a 302(331 or 347) 351(408)W, 351C or a Coyote! Personal, I'd Have to put the Grandfather of V8's, the Ford flat head with a set Edlebrock heads & a edlebrock or offenhauser intake on it. agree to disagree.
You’re exactly RIGHT. To each their own!!!
If you listen to Chip talking it's the motor that came out of the truck.
>> ...people Don't put a Ford engine in a Chevy hot rods
Built Ford tough with Chevy stuff.
@@logancarter2134 and?he didnt have to at all!!!
You know back in the day it was common practice to drop Chevy and especially Chrysler Hemi engines into all types of Hot Rods. So this is Old School.❤
Chip , you need to invest in a hydraulic lift!!!!✌🏽😎
Are you guys really telling Chip how to build a car really Mike
Beautiful looking Ford !!
MR CHIP FOOSE! WOULD YOU CONSIDER PUTTING ON SOME ( BADDD CHADDD ) CHROME ON THE BUMPERS! FROM THE CRAZIEST CAR CHANNEL ON RUclips, ALL THE WAY FROM ( NOVA SCOTIA ) CALLS HIM SELF A PROFESSIONAL!
👍
If you are putting the motor back in that you pulled out, why are there some folks whining about it? Great job Chip, what a hoot!!
That's not a 429ci darn!
It works if you like Shevy things, I guess.
HEY FOOSE? IF THE MOTOR DOESNT WORK OUT PLEASE DONATE IT FOR MY PRIUS C!! 🤣HAPPY EASTER 🐣
Oh no Chip. How could you install a Chevy motor in a Ford :)
Sad a chevy eng in a ford😢😮
very sad!!!
🆒😎👍!
Commentary is like Groundhog Day……😅
What happened to Josh?
Take the radiator out!
I was thinking the same thing
I would never put a GM in a ford at least chads fab put a ford motor in his Chevy lol
So much drama from the Peanut Gallery! Nice hot rod Chip! Also I could not take my eyes off the car on the lift behind the Model A. Please show more of THAT too!
Foose !
The Great Car builder knows that the Small block Chevy is the Greatest Engines !
Nice project. I am collecting parts for a very early thirties similar project planned to be painted in 79 F150 metallic blue. I have Ford 300 inline six with an aftermarket turbo project engine almost ready that came out a generator used in a welding truck from the early 1970's.
I think Mr Ford would be happy to see this truck. great video 2x👍
no he would not!a junk chevy motor in his vehicles?
Chip knows what engine is the real deal
April fool's?
Great video - lose the music please 😫
Dude WTH
Call Me Crazy But I Would Love To Have Just a Nice Stock Model A To Chiggity Chig Down The Street For Coffee and a Donut Or Two With The Wife and Kids!😁👍💯
It’s sad that he’s dropping a Chevy motor into a Ford
Anybody can build on of those cardboard engines. pOS
why but why put a junk chevy engine in it?cmon chip i thought you were better then that!!you do all that work doing a car from scratch and and you could put least a flathead back in it!!!
The only way to make a Ford better
The real engine! Chevy! 😂😂😂😂
It's great to see America's favorite engine in a classic Ford. Timeless combo.
Chevy!! Yes yes yes 😂😂😂😂
SOS Putting a Chevy motor in a Ford, should be a FELONY!
Now wait a minute,
You're gonna "put the motor in the engine compartment"?.......So, it's going electric or what?
Did you ever "put an engine in the motor compartment"?
Yes a Chevy in a Ford
Será que ele é parente de Donald Trump 😅
If it wasn’t for Boyd Coddlington nobody would know your name..😊
That music sucks. It's way too loud
Built ford tuff with Chevy stuff
It seems funny to me that you Ford guys after getting a Chevy HEI distributor sing the praises of the bowtie. To me it makes no difference. Admit it though Fords are more finicky. Just saying.
>>Fords are more finicky.
That's because people are cheap, so they put the Chevy in a for ,and when your trying to explain something get rid of the music!!
Lousy music
The music. 👎🏻👎🏻👎🏻👎🏻
Chevy engines are for lazy builders.
Chevy going into a Ford is cool.....cry babies need to shut up and examine their lives, can't you be thankful for something and let it go?
it came with the truck and chevy parts are cheap,so he is not going to put high dollers into a good ford engine,when he got the junky chevy for free.js