May I suggest a thin UHMW skid plate for high centering? It would be incredibly beneficial IMO. Stops the undercarriage galling and friction from FWD, REV and/or lateral movements. It's likely the most "slippery" and virtually bomb proof plastic on earth. Available in polyurethane or poly propylene. Called Ultra High Molecular Weight plastic. Incredibly tough super slick stuff.
That is just about the most sophisticated crawling setup I’ve seen yet, with dual Fusion Pros, and with the proper weights and tires, that thing is an absolute moon buggy!! Hope your enjoying your retirement to the fullest buddy, and hope that “havin to go to work-void” ends soon. You’re on your way to the top of this thing brother!
I decked out my danchee Ridgerock looks very similar to this but my chassis is a RCP progress 10 2.2 chassis and I’m running Injora comp 2.2 tires, carbon fiber wheels, hub weights, everything is upgraded but still on stock motors and esc, I have aftermarket ones but still looking for the right size pinions for the motors. It climbs over everything just about though, very impressive 👍🏾
That part where u stayed on trigger. WDW Does something to load the suspension up like i was saying and makes it lurch but like its in slow motion to where it would have walked straight up that spot. Because that car even with the tires and no weight. Should have walked that spot no problem. But its a a learning curve and i have no doubt u will have it mastered before long. But when u see someone else do something and u see it work from their perspective it opens up doors to a creative mind and it will make u see new lines that u didnt before no matter how good u think u are.
Beautiful. You're gonna need a whole nother section for moa. Not trashing your course, but once you get used to the rig, that stuff will be child's play.
Great looking rig! At first glance they look like a Sporty but MOA is a totally different beast. You really have to unlearn what you know about crawling. Using dig/burn on an MOA, you can manipulate the chassis, loading and unloading the suspension to get over obstacles. You really need a course that will challenge the MOA, though, it will eat up the Exoplex crawling course with ease! Get ready to lay down some hard earned Benjamin's, a properly set up MOA rig starts at $1500 and sky's the limit from there 😮 I am lucky enough to own an Axial XR10 and this rig will do things that will completely blow your mind!
Very cool looking rig. Always enjoy your enthusiasm and personality. For someone starting out, besides the link for the chassis, what axles did you purchase and from where? Motors, etc? Thank you and keep up the excellent work.
Just figured out how to keep up with your uploads Joe: 1.5x playback speed. Just as entertaining and sounds like you just drank about 17 redbulls. Congrats on getting all these vids out for everyone!
I'm not a crawler and don't own one. What would be the benefit of going fwd, locking brake holding the axles, all the other neat features? Genuinely curious 😅
That looks & performs amazing with dual Fusions. Really interested in a setup up like this, are they both plugged directly into the receiver or is there a separate dig unit?
Seriously take a few mins go to that channel the things he does with his MOA is something and he's very vocal in his videos and u can't help but to get better watching him. I've seen him load the car up using the ESC's and make the whole car squat and make it Lurch forward like a cat to make the front wheels hole while the whole back of the car is dangling off a ledge then make it pull it's self straight up and out it looked like a Mountain Climber that just used his arms to pull hid self up. But take a few mins and go check him out u won't be disapointed. And believe me I Don't know that dude from Adam's house cat. But I can tell u he's good with his RC's and drive comps all the time. He's a team driver for Rock Pirates RC. If u have heard of them
Man I've got the Vitavon 2.2s to match that color if you wanna deal me out of them. I dont use them but awesome vids as always keep climbin up the ladder bud you got this job down pack
May I suggest a thin UHMW skid plate for high centering? It would be incredibly beneficial IMO. Stops the undercarriage galling and friction from FWD, REV and/or lateral movements. It's likely the most "slippery" and virtually bomb proof plastic on earth. Available in polyurethane or poly propylene. Called Ultra High Molecular Weight plastic. Incredibly tough super slick stuff.
That is just about the most sophisticated crawling setup I’ve seen yet, with dual Fusion Pros, and with the proper weights and tires, that thing is an absolute moon buggy!! Hope your enjoying your retirement to the fullest buddy, and hope that “havin to go to work-void” ends soon. You’re on your way to the top of this thing brother!
I decked out my danchee Ridgerock looks very similar to this but my chassis is a RCP progress 10 2.2 chassis and I’m running Injora comp 2.2 tires, carbon fiber wheels, hub weights, everything is upgraded but still on stock motors and esc, I have aftermarket ones but still looking for the right size pinions for the motors. It climbs over everything just about though, very impressive 👍🏾
That part where u stayed on trigger. WDW Does something to load the suspension up like i was saying and makes it lurch but like its in slow motion to where it would have walked straight up that spot. Because that car even with the tires and no weight. Should have walked that spot no problem. But its a a learning curve and i have no doubt u will have it mastered before long. But when u see someone else do something and u see it work from their perspective it opens up doors to a creative mind and it will make u see new lines that u didnt before no matter how good u think u are.
Beautiful. You're gonna need a whole nother section for moa. Not trashing your course, but once you get used to the rig, that stuff will be child's play.
Great looking rig! At first glance they look like a Sporty but MOA is a totally different beast. You really have to unlearn what you know about crawling. Using dig/burn on an MOA, you can manipulate the chassis, loading and unloading the suspension to get over obstacles. You really need a course that will challenge the MOA, though, it will eat up the Exoplex crawling course with ease! Get ready to lay down some hard earned Benjamin's, a properly set up MOA rig starts at $1500 and sky's the limit from there 😮 I am lucky enough to own an Axial XR10 and this rig will do things that will completely blow your mind!
Finally, an MOA! Thanks!
That is awesome! So cool what those MOA Rigs can do, can't wait to see the improvements with some different Tires and Foam and the Weights. ✌🏼
There's some really good dudes with those in Moa pretty sure Logan with West Desert wheeler he shows a couple runs and then another guy High Noon Obby
That thing is gnarly!! But you gotta shut that controller up!! Damn that gets annoying. Nice video man
Ordered mine just over a week ago! Can’t wait for it to show up!
Very cool. That thing looks like some kind of Mars rover. Thanks for sharing!
The 5th thing that rig is awesome can't wait to see it in action again
Congratulations
M.O.A.ddiction
A beast released
Very cool looking rig. Always enjoy your enthusiasm and personality. For someone starting out, besides the link for the chassis, what axles did you purchase and from where? Motors, etc? Thank you and keep up the excellent work.
Really nice u should make this one a 4 wheel steering
Just figured out how to keep up with your uploads Joe: 1.5x playback speed. Just as entertaining and sounds like you just drank about 17 redbulls.
Congrats on getting all these vids out for everyone!
I'd like to see a video on how to set up the radio to run that.
I knew the Moa would be a hit. I love mine! Now ill finally stop bringing it up in lives 😂
Could you do a side-by-side comparison with this and the danchee?
The voice from the remote would drive me nuts, haha
That's cool Joe 👍 such a different video from the usual. Good job brother, that rig will be a fun learning curve 👊
0:30 never understood why you dont just mount a phone mount via gopro mount to your transmitter.
The transmitter talking would drive me nuts. Lol
How did you connect the dual esc to the receiver ? have you removed one red cable from one of the plugs going into the receiver ?
Ch1 and ch2 and I used the MOA mix. Yeah I took a red wire out.
I love moa's . I see them walk up everything. Glad to here you quit your day job
I'm not a crawler and don't own one. What would be the benefit of going fwd, locking brake holding the axles, all the other neat features? Genuinely curious 😅
Front wheels turning with rear locked is called dig. It let's you pull the front around while keeping the rear in about the same place. Like a swivel
Pretty cool rig!!! It is weird seeing thd Exocage Comp Stance!!!🤣🤣🤣
Incredible rig
That's pretty neat!
#GOALS.... That's all I gotta say as I drool
that servo throws those 2.2s around like nothing!
ITS LIKE THE TERMINATOR NEVER GIVES UP! LOL
What a great rig. On my way to work so definitely will finish watching at break. Can’t wait to see more of this in action.
That looks & performs amazing with dual Fusions. Really interested in a setup up like this, are they both plugged directly into the receiver or is there a separate dig unit?
Both on one receiver probably using a splitter RX wire
NEED PINNS JOE
👍😁
Wow like the performance of that machine 👍👍👍 looks like it’s more robotic than vehicle related but loved it’s potentially…
Was that the controller talking to you?
Yep
Seriously take a few mins go to that channel the things he does with his MOA is something and he's very vocal in his videos and u can't help but to get better watching him. I've seen him load the car up using the ESC's and make the whole car squat and make it Lurch forward like a cat to make the front wheels hole while the whole back of the car is dangling off a ledge then make it pull it's self straight up and out it looked like a Mountain Climber that just used his arms to pull hid self up. But take a few mins and go check him out u won't be disapointed. And believe me I Don't know that dude from Adam's house cat. But I can tell u he's good with his RC's and drive comps all the time. He's a team driver for Rock Pirates RC. If u have heard of them
man that thing is wicked i cant wait to see how good it does when its dry i love it
Man, 4 digits for the KIT. Wish I could, can't do it.
That's a freking amazing rig brotha!
Looks like the flysky nb4pro is much easier to use. But cool to see you have got a moa👌🏻👍🏻😊
Different but I like it
That looks sweet as cherry 🍒 pie
Spike hairdo today
Man I've got the Vitavon 2.2s to match that color if you wanna deal me out of them. I dont use them but awesome vids as always keep climbin up the ladder bud you got this job down pack
Line lock Engaged!
My jaw is dropped
Looks cool
Gee, thx joe🤷♂️🤦♀️! I already miss mu bully 2 I had. Didn't need to see THIS! Not 1 bit
MY bully 2, needed 3ch to drive. 7 channels if u wanted everything.
@@old-rcplane-phartwhy do you need 7 channels? I only need 3 channels for my bully 2 and i do everything 😊
SO IMPRESSED WITH THIS THING LOL. IT PERFORMS GREAT. IMO ITS THE UGLY SISTER 😋✌🏼
try the 1.9 ruptures on it
need comp 2.2 pins ......
You putting rear steering on it
Looks like a good video. But I can't stand that talking radio. I watch as much as possible.
I am just not into this style of crawler. They look weird. Sure they work well but they look ridiculous. Looks like just a frame with no body. Meh.
it looks boring to me
$600 for one axle?