Replace timing belt and tension roller Volvo 240, 740 and 940 Part 1

This video is section 2 of 2.
In this video we change the cam belt and also the tension roller. Moving the spring from the old tensioning roller to the new one can be a small challenge. replace intervals on the belt to the Volvo 740 are every 8,000 miles or every 4 years dependent which comes first.
There is a special tool with article number 999 5284 which can make it easier to remove the bolt that holds the pulley on the crankshaft. If you do not have access to this tool, you can try a nut switch.
On this Volvo 740 model with B230F engine, we do not need to follow the marking on the drive to the oil pump, this marking applies only to models that have block distributors.
The cam belt and the tension roller in the video are of the CONTITECH brand and have article number CT643K1.
Like the video and click on the thumb up, we will be super happy.
Don't forget to subscribe to the channel, more videos will soon pop up.
Section 1 of this video can be found on this link.
• Byta kamrem och spännr...
Are you in Facebook so be sure to visit, like and follow us there too.
/ volvosweden.se
All the tightening torques for the Volvo 7/900 series can be found on this link. Note that you must be logged in to the forum to follow the link.
www.volvosweden...
If you need additional pictures and explanations for this video, you are welcome to visit this guide on the Volvo website.
www.volvosweden...
In this thread we collect all tips, supplementary information on how to change the cam belt and tensioning roller.
You should also re-tighten the tension roller after a number of miles this information and more are in this thread. Fill in with your experiences.
www.volvosweden...
More cam's guides can be found in the forum's guide and manual library. NOTE you must be logged in to the forum to follow the link.
www.volvosweden...
Thanks for watching.