Update: mountain storm is no longer making these. If you search his videos, you will find one where he says he has stopped making them out of wood, and is planning on making them from metal. That was 3 years ago (from today’s date 11/12/20). He has not made a video since about this product. He also stated that he doesn’t answer email. So it looks like this is unavailable.
same here mines has at least 500 rds. Just wipe clean when done n change the blade now n then. think im getting another grid or two to speed up pouring.
i have been following you for a while n bought your tools. know you been into R.C. n watched some, we all have other stuff we enjoy. mines saltwater fishing. my range don't even know that im shooting waxers! they just see low brass trap shot on the table. lol love when they hit a gallon water jug! my house now re-purpose all plastic bottles now i put a drop of cheap food coloring in them re-fill water, bring to range blow them up. just got to remember trash bags.lol
goota say there mountainstorm,you have a great way of taking and showing the art of wax slug makings,,,,i did a y-tube vid at 42 below 0 shooting very hot water milk jugs with the singleshot h&r 12ga. and waxers needless to say it was spectacular,,,
used mine about a thousand times still same blade this thing is great. only problem I've ever had is you have to stop and clean the fine debris out and occasionally a small birdshot pellet will get stuck behind the blade only takes a second to get it out it usually only does that when it needs cleaning. I just take a micro flathead screwdriver run it around the inside to loosen anything stuck behind the blade. you might have to do this cleaning about every 25 to 50 shells. I highly recommend this gadget to anyone especially if you want to save money on slugs. it also can be used on smaller shells I just fold a little piece of cardboard put it on opposite side of the blade and cut 20ga shells. probably would do 16ga also.
O man the infamous tool lol I just do it by hand I have none enough of them now that I can do it fast and accurate I just cut under the crimp roll tords the outside of the shell instead of straight down but I usto allwase want one Thay just look so nice . If I ever saw one being sold I would buy it
Thats nice but HARBOR FREIGHT sells hole cutter that you put oh the end of your drill for a few dollars and you can us the set on 410 and 20 gauge also...dont use candle wax or crayons they work but not as good as hot glue or just melting the lead you have and casting them but that way is just a little different.
Alright, I jus emailed this gentleman and I got a automated response that the email could not be delivered due to the mailbox owner has turned off his email box, 🤷🏻
+Adam Burgess These tools can be used to open 20g hulls. A 20g sized hole tool is a tad too small of a radius to pass the blade cleanly, but if you hold the hull against the blade side of the hole of a 12g tool it works fine. You can email me at rw_keeton@yahoo.com to order tools. Thanks!
You get bonus points for using "hinky" lol
I just bought one watching your video Tao
+Mountain Storm Do you have any plans on producing the shell prepper tool ever again?
It's 2021 and I'm hoping he's ok
Update: mountain storm is no longer making these. If you search his videos, you will find one where he says he has stopped making them out of wood, and is planning on making them from metal. That was 3 years ago (from today’s date 11/12/20). He has not made a video since about this product.
He also stated that he doesn’t answer email. So it looks like this is unavailable.
Thanks for the update.
That's too bad. Looks like it was a genious product.
bummer
Love mine. Over 500 rounds deep these days. Don't forget to to grab a grid board for filling the little bastards too.
Good Advice and good to hear from you. Thanks!
same here mines has at least 500 rds. Just wipe clean when done n change the blade now n then. think im getting another grid or two to speed up pouring.
i have been following you for a while n bought your tools. know you been into R.C. n watched some, we all have other stuff we enjoy. mines saltwater fishing. my range don't even know that im shooting waxers! they just see low brass trap shot on the table. lol love when they hit a gallon water jug! my house now re-purpose all plastic bottles now i put a drop of cheap food coloring in them re-fill water, bring to range blow them up. just got to remember trash bags.lol
goota say there mountainstorm,you have a great way of taking and showing the art of wax slug makings,,,,i did a y-tube vid at 42 below 0 shooting very hot water milk jugs with the singleshot h&r 12ga. and waxers needless to say it was spectacular,,,
I have 2 of the old style and they work great, also a really nice cane. His work is great
Very kind of you. Thanks!
I wish you had a website to just place orders on, then wait if it's out of stock
Just got both of mine in thanks dude amazing work
I appreciate you saying so. Enjoy!
I ordered one and just received it.............fantastic work! Cheers :-)
Thank you! Enjoy.
That's a nice build.
I want one. You should provide a link where a person can buy your tool in the description section. So.... How do I get one?
Love mine, thanks again
That's always good to hear. Thank you!
Neat idea, cool execution.
You should get an index card, write your email addresss on it!
Hey Mountain Storm are you still selling these?
used mine about a thousand times still same blade this thing is great. only problem I've ever had is you have to stop and clean the fine debris out and occasionally a small birdshot pellet will get stuck behind the blade only takes a second to get it out it usually only does that when it needs cleaning. I just take a micro flathead screwdriver run it around the inside to loosen anything stuck behind the blade. you might have to do this cleaning about every 25 to 50 shells. I highly recommend this gadget to anyone especially if you want to save money on slugs. it also can be used on smaller shells I just fold a little piece of cardboard put it on opposite side of the blade and cut 20ga shells. probably would do 16ga also.
How much?
O man the infamous tool lol I just do it by hand I have none enough of them now that I can do it fast and accurate I just cut under the crimp roll tords the outside of the shell instead of straight down but I usto allwase want one Thay just look so nice . If I ever saw one being sold I would buy it
Any chance your still making these or the boards still? I’d love to get a set.
Can I get one of these for a .410 shell?
Thats nice but HARBOR FREIGHT sells hole cutter that you put oh the end of your drill for a few dollars and you can us the set on 410 and 20 gauge also...dont use candle wax or crayons they work but not as good as hot glue or just melting the lead you have and casting them but that way is just a little different.
should add a de-priming tool to it
Are you still making these ? Or can show the plans
Did you get a response from him? I was looking to get one of the shell preppers also. Thanks
Well ---- what Do They cost?
Has anyone gotten a reply from
Richard the last 6 months?
I would love to buy on sir how do I find your address sir
Do u sent them to canada and how much do u sell the tool for
I bought a clam-shell type as well and I am very happy with it. If I did not get back to you. I am sorry.
Thanks for your support!
Are you still making them?
I would like one
What’s everyone’s thoughts on using something like blue magic quick steel epoxy putty and some shot for a slug ?
Are you still a dish tech? I start training in a month and was wondering you were happy? Pay etc. thanks
It sucks we can't buy them from you any more
In the words of Peter "Pan" Banning from the mover Hook, BANGORANG!!!!!!!!!!!!!
how do I buy this? I would love to purchase one from you
Wtam , gdzie taki wycinacz mogę kupić odpisz , albo podaj link do strony .
20 gauge would be awesome... (Edit: And I see you've answered this comment a million times already...)
Check my channel and you will see the featured video addresses the 410 and 20g thing in depth.
OK, yeah, I want one of those. How do I get one?
Such a handy invention, do u ship em to Sweden Europe ?
+Ajmal81 Yes I do. Total including Priority shipment would be $55 US. Email me at rw_keeteon@yahoo.com to place an order.
Where can we buy the tool and how much is it
hello, where can i contact you for information regarding this device, id like to purchase one
Sir
Do you post to UK 🇬🇧.
Hi,
Are you still making these? How can I purchase?
I want one just like that... how can I get one?
Alright, I jus emailed this gentleman and I got a automated response that the email could not be delivered due to the mailbox owner has turned off his email box, 🤷🏻
where can I buy a Mountain storm prepper tool
I think you created a new word, "bungholiodime" ? / ?
how do I go about buying one of these.
Hi how much would this cost with shipping to the UK be please
Are you still making these?
Whats the price on one of these?
Hi; how do I order one of these?
price?
Hi,
I send you a mail for you're tool ;)
Where do I go to buy this?
I want one
How can I purchase one of these?
How much are these?
Where do I get one?
Hello. Are you still making these? Thank You
Yes. I responded to your email today.
@@MountainStorm what's your email address
how much is this model going for?
+RVMAN1470 35
i want to buy one
Love to order one but you said that so fast I replayed 10 times I can't catch your email
I want one how do I order
Do you make them for 20 g?
+Adam Burgess These tools can be used to open 20g hulls. A 20g sized hole tool is a tad too small of a radius to pass the blade cleanly, but if you hold the hull against the blade side of the hole of a 12g tool it works fine. You can email me at rw_keeton@yahoo.com to order tools. Thanks!
How do I get one?
I want one. Haven't got a reply on the email.
how do I order one
how much??
Hello. how do I order one?
27.00 bucks a hundred were do you live. I'd like to buy 1000. 🙏
Can u make a 20 g
+Shane Puckett Nope but this tool will open 20g hulls.
I've send an email regarding that tool you make . didn't get a reply!!!! are you still using the same email?
Still making these? I know kind of an exhausted question but I think my email must have gone to your spam
Can you send me your email, was not able to understand when you said it on the channel !
Price or link
FIRST yo
Mountain Storm Hey, are you still producing these, if so I would love to get one
whats your email agin I would like too buy one from you.
Id buy one message me info
I want one. Please message me
+MrTwodogshumping email me at rw_keeton@yahoo.com to place an order
+Mountain Storm tao is the reason I just bought one.