2004 GSXR dealer codes (error codes)
HTML-код
- Опубликовано: 17 окт 2024
- I noticed on the RUclips that there is a lack of videos for how to get a k4 Gsxr into dealer mode so I figured I would show you how to get your bike into dealer mode while in the process of checking my dealer codes and throttle position sensor on my bike (Sarah)
Made via RUclips Capture
This video was really helpful I needed to find the code for my 08 hayabusa and the colors you explain was the exact colors so it really help me out thanks for this video
Really glad I could help!
❤
K7 owner here, if I did not troubleshoot this indicator, would it give problems to the engine performance? we changed the pipe already, Im pretty sure its the SET valve indicator... thanks.
Here codes...
GSXR Fuel Injection (FI) Code List: C14 - THROTTLE POSITION SENSOR C15 - ENGINE COOLANT TEMPERATURE SENSOR C21 - INTAKE AIR TEMPERATURE SENSOR C22 - ATMOSPHERIC PRESSURE SENSOR C23 - TIPOVER SENSOR C24 - IGNITION SIGNAL #1 C25 - IGNITION SIGNAL #2 C26 - IGNITION SIGNAL #3 C27 - IGNITION SIGNAL #4 C28 - SECONDARY THROTTLE VALVE ACTUATOR C29 - SECONDARY THROTTLE POSITION SENSOR C30 - SECONDARY THROTTLE CONTROL UNIT C31 - GEAR POSITION SENSOR C32 - INJECTOR SIGNAL #1 C33 - INJECTOR SIGNAL #2 C34 - INJECTOR SIGNAL #3 C35 - INJECTOR SIGNAL #4 C41 - FUEL PUMP CONTROL SYSTEM C42 - IGNITION SWITCH SIGNAL C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)
Which wires do we need to cross?
Thanks men! What was the problem with your bike?
Throttle position sensor was not in the correct position.
My bike is shooting c00 code but still won’t start. Please help. Changed starter, starter solenoid ,and battery and all fuses.
You solved the problem?
Thanks so much man great video!
you line is high because the bike is set for fast idle and has the throttle open slightly. that should be checked/adjusted with the engine warm and runnig
friend on gsr 750 is also the same position on the connector? thank you
Yes I did. C00 is what it displays when you have no codes and are changing the TPS
If the f1 light is on before you check there will be a different code
عندي مشكلا الراجه ساسوكي سكاي ويف F1
A quick question for you, what happens if you plug the wrong wires during dealer mode ? I think I may have screwed up because now I’m not getting fire to my coils
Where does the wire come from!? Where do I put it after
what if you get a completely blank screen it still lights up but it shows nothing at all
So I didn't start a fire but I did plug in the able in the wrong wholes. I watched a different video it was the first time I heard about this and try to make time to find the code of why my f1 light came on. So I rushed and I heard it short well burn something. I've been looking all over the Internet and can't find anything about what I burnt. Any ideas?
Thanks
YES IVE DONE IT A FEW TIMES LOL CHECK YOUR FUSE BOX, YOU SHOULD BE OK IF YOUR BIKE DOSNT START WHEN YOU TURN THE KEY AFTER THIS YOULL ALSO NEED TO CHECK YOUR MAIN FUSE ITS BEHIND THE CLEER PLASTIC COVER NERE YOUR FUSE BOX.
IF YOU YANKED THEM (THE WIRES) OUT AS SOON AS YOU NOTICED SOMETHING WAS WRONG YOU SHOULD ONLY AT WORST CASE HAVE A BLOWN FUES
l
Thanks dude really appreciate it, very helpful, thanks you
thanks for the video. my bike has the same error code, did you find out what it was
My shows a black wire with a white stripe and a white wire with ared stripe. Thes are the two where the ports are next the others are grey and orange with a white stripe. 04 gsxr 600 are these the same wires.
What does that code mean ?
C00 IS NOT SHOW ...I figured CHEC
Is the problem in the MIMIORE!!!???
Well had code c00 which apparently means you have no codes lol started the bike then c46 pops up, removed the baffle on aftermarket pipe and codes gone no f1 light all good GSXR K1 1000. cheers
ok sumbody help i have a 2004 gsxr 1000.... went rideing today an went it just shut down try to start it back up none....lite cum on fuel pump comes but it just wont start all it do is turn ova..... who can hlep
Dennis Bohannon same here with mine went riding went to nail it it shut down waited a few minutes and it crunk back up.
c00 means everything is cool
my 04 has black and white wire.
Error code c00 but still have hesitation.
I wanna see a mini fire
Tenho um Suzuki Burgman 2005 em teny problema c50
ta crê saby e ki poblema
khan
C00 IS NOT SHOW ...I figured CHEC
Is the problem in the MIMIORE!!!???
CHEC means you have your kill switch on xD