I put a catch can on and put a breather on the end. I was told there will be a lot of water when it is cold. I have to empty my catch can at least 2 times a month and I’m in VA. If it’s mainly water. I wouldn’t worry too much about it.
Try to put more vents on the valve cover that one stock one isn’t enough for your power try to research about that little more but from what I understand engine needs to breath little more with this power level. Love your vids bro keep on pushing 💪🏼
Man I need to pull my trans on my M52 E30 and I’m not looking forward to it cause the prev owner used M5 mounts and 2 of the bell housing bolts sit on the firewall.
Btw a good tip instead of using all that brake clean use this stuff called Engine Brite engine degreaser you just spray it on let it sit for 5min then blast it off with water and it’ll look super clean
Hey bro Nice videos man, I know turbo applications you need to install the O-ring and apply RTV sealant because when the boost kicks in it puts a lot of stress on that dipstick tubing connection.
Hey bro don’t expect you to respond since it’s an old video, but how did you maintain you powersteering. I’ve seen you had the chase bays lines but did you use the chase bays kit minus the reservoir included with it?
Are you driving thoes tires in the cold? They have a warning , that they arn not supposed to handle 40* the deform / crack / go out of round.. (says falken ) I love falkens I have run. but the cold temp warnings keep me from buying the 615 for my turbo e39 touring... any opinions on how they handle the cold ? (Currently im in springfeild mass)
You need cribbage. Rolling the dice every time you crawl under witdem stands. Three dozen 18" 4x4 timbers make four 14" tall blocks, one under each side jack point. You + three homies couldn't get that car to move a mm. With 4by's and a 10" footprint, you can take 26k pounds all the way up to 30" high and have the same stabilty. FD's around the world, fema and SAR's all use this tech. Vertical shoring ftw.
me also having an olied transmission in my e36: „At least it doesn’t rust eyy“ lmao
in russian that an essential attribute old bmw. imao
Fwiw oil doesn't do good things to rubber lines and mounts. Basically over hydrates them making them less durable.
It just keeps getting better and better. That car has no limit fr
Thanks for the burnout bro. Can't wait till my e34 can do burnout just like yours.
I feel so safe in the back seat now with the quick release 😹😹
Aye is this the guy from the cop spin out video?
me and my friends are parked along the fence in the end of the video, cool to see a local
I put a catch can on and put a breather on the end. I was told there will be a lot of water when it is cold. I have to empty my catch can at least 2 times a month and I’m in VA. If it’s mainly water. I wouldn’t worry too much about it.
Well done man 👍 You rebuilt it now have some fun with it .... 😊
"It's like an eraser" 😂😂 so satisfying
That burn out was PROPERRR
Love the videos bro your car is insane ,I just purchased a 89 325is I plan to m52T swap it because of your videos 👍
Iam also planning to do exact copy of his amazing build >, I have 1990 320 sedan japan model e30
Great job bro,fun times
thanks for showing the good and bad! helps me learn :)
Our builds are pretty similar! loving it :)
Try to put more vents on the valve cover that one stock one isn’t enough for your power try to research about that little more but from what I understand engine needs to breath little more with this power level. Love your vids bro keep on pushing 💪🏼
5.7k !!!!! Keep it up dude
15:00 new gaskets... did you use OEM bmw gaskets or eBay special?
Man I need to pull my trans on my M52 E30 and I’m not looking forward to it cause the prev owner used M5 mounts and 2 of the bell housing bolts sit on the firewall.
It's crazy how it sounds like a N54!!!
Btw a good tip instead of using all that brake clean use this stuff called Engine Brite engine degreaser you just spray it on let it sit for 5min then blast it off with water and it’ll look super clean
aiming for around 600 with my e30 but i have to wait BECAUSE PARTS ARE EXPENSIVE AS HELL
Hey bro Nice videos man,
I know turbo applications you need to install the O-ring and apply RTV sealant because when the boost kicks in it puts a lot of stress on that dipstick tubing connection.
Hey bro don’t expect you to respond since it’s an old video, but how did you maintain you powersteering. I’ve seen you had the chase bays lines but did you use the chase bays kit minus the reservoir included with it?
I need to make that bracket for my dipstick too use some good old CAD
Literally changing the same thing on my E30 rn, and Doing a turbo
Been waiting sheesh
man I just have zip ties on my fuel pump for like 5 years now. a hose clamp doesn't fit anyway so I'd say those metal ties are fine
what getrag did you choose from the line.. i have one 260 and i think one 245 all for m50 and one m20b35 and i guess one 265on brothers m52 project 30
That screamer pipe makes this car so mean
Will be dry under one side of the car from the exhaust burning the oil off before it has chance to reach the chassis rail on that side of the car.
Are you driving thoes tires in the cold? They have a warning , that they arn not supposed to handle 40* the deform / crack / go out of round.. (says falken ) I love falkens I have run. but the cold temp warnings keep me from buying the 615 for my turbo e39 touring... any opinions on how they handle the cold ? (Currently im in springfeild mass)
Keep up the 🔥🔥 content bro 🙌🏽
Love and support bro ✊🏽✊🏽😭❤️🔥🔥
Hi broth, I would like to know what super tank did you install? Greetings!
8:36 had me dying lmaooo
Proper burnout 😂
holly fuck that thing rips
YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEETTTTTTTTTTTTTTTTTT!!!!
My dipstickpipe won't even sit properly.. I can lay all my weight on the dipstick pipe but it want go all the way in. So the engine throws oil out..
You’re basically famous come catch some top
You need cribbage. Rolling the dice every time you crawl under witdem stands. Three dozen 18" 4x4 timbers make four 14" tall blocks, one under each side jack point. You + three homies couldn't get that car to move a mm. With 4by's and a 10" footprint, you can take 26k pounds all the way up to 30" high and have the same stabilty. FD's around the world, fema and SAR's all use this tech. Vertical shoring ftw.
Shouldn't oil dip-stick o-ring be rubber?
Bro we have the same car color and wheels. And I'm in the middle of megasquirt and turbo
What transmission and driveshaft combo you using?
Yoooo you plan on drifting it??? That’d be dope I wanna see that for sure prolly finna be the cleanest drift car out there
did you change the ratio of the compression?
atta boi
Fk yes bro!!
Jimmmmmyyyyyy
The m52 you used was it an m52tu?
i have an iron block m52b28
Not a m52tu.
18:57 bro i fucking hate when that happens XDDD
You should get an Mtech 1 kit bcz the US bumpers spec are super uglyyy for all of that powaaa😍
Cherry Hatch Jimmy O
do not drift the e36 Joel , before you now ja pull a jimmy on her, that will be ashame because it is a really nice car .
4th gear burn out or quit 😜
WHAT A FUCKING INTRO
ameteur initiating drift via hand brake
0 dislikes :) lets gooo
Uhhh doesn't sound so good at 😕
Any men likers?