Question. Did you have any problem before cleaning the MAFS? Lack of power ? Blowing lots of smoke,excessive fuel consumption? After cleaning, what was or if any noticeable differences? Do you also do a factory reset to remap?
Vincent Battista - yeah i havent found much of an argument not to use contact cleaner. I just figure they cost a lot to replace so can justify an extra few $
I'm sure it happens all the time but allegedly contact cleaner leaves a slight residue (but it's still gotta be better than the grime on it). However having used both they both seem identical. I just went with the maf cleaner because they cost a lot to replace if damaged.
For me it was poor mileage and poor acceleration. The sensor measures weight/temp of incoming air and the ecu calculates the fuel required using the reading. Over time, the sensor gets caked in dirt.
Wow with that music, I've never seen such a sexy mass air flow cleaner.
Question. Did you have any problem before cleaning the MAFS? Lack of power ? Blowing lots of smoke,excessive fuel consumption? After cleaning, what was or if any noticeable differences? Do you also do a factory reset to remap?
Huge thanks massive improvement instantly👍👍👍
Yeah was very noticeable on first clean
Hi, mate. Massive improvement on what? Are you referring to fuel consumption? Cheers.
@@etona66 Hi, mate. Massive improvement on what? Are you referring to fuel consumption? Cheers.
If the air flow sensor is dirty can this effect the boost ?
make sure plug is pushed on hard or light wont turn off even with reset
Does this bring up any code faults on your ecu?
Terima kasih👍
Can i use CarbuCleaner?
very good my brother
Can I clean it with vinegar, lemon juice and witches hazel?
No! Mad cleaners only. Even contact/circuit cleaner can leave a residue that affects the sensor
yes very nice
Can I use contact cleaner to clean it? Thanks!
your Vedeo INSPIRE ME
thanks for the vid, you may have solved a veryy long time problem of mine.
do you think it would be safe if i used electrical contact cleaner?
Vincent Battista - yeah i havent found much of an argument not to use contact cleaner. I just figure they cost a lot to replace so can justify an extra few $
cheers!
just took me 3 goes of plugging it in and unplugging it
good
can i use WD40?
Funny
Can i clean it wth w40
WD40
Is it right to clean maf sensor with contact ele cleaner? navara d40 2.5dci 2006
I'm sure it happens all the time but allegedly contact cleaner leaves a slight residue (but it's still gotta be better than the grime on it).
However having used both they both seem identical. I just went with the maf cleaner because they cost a lot to replace if damaged.
Contact cleaner is excellent better and cheaper
Can I clean it with another thing?
Juan Antonio Tenorio Castillo electrical contact cleaner.
Yes
How about using WD40, im not tight but i have WD40 in the shed ?
Alan Legg I’m not to much of a car guy but I’m almost certain you need to use a maf cleaning product.
@@dillon9421 you don't want any residue left on the sensor as it will effect the function, contact cleaner needs to be the non residual type
d40 navara 2010
Lol, sensual.
Brake cleaner works better
Contact cleaner is excellent it's exactly the same ingredients as the mass air cleaner crc , do not use anything else other than alcohol
Thank You, Just A question, how often should you do this ... and how do you this following 0893569250, Injector Cleaner - Wurth
Why do we need to clean it bos?
For me it was poor mileage and poor acceleration.
The sensor measures weight/temp of incoming air and the ecu calculates the fuel required using the reading. Over time, the sensor gets caked in dirt.
It’s can help with the black smoke?????????