Thank you So much for the time and trouble to make the content, it was AWESOME, i really appreciate your noble intent, what is worrying is that over 21,000 views,and just 77 People managed to bother with a few minimal words of Gratitude, show's how far Humanity has descended to, perhaps many of those who viewed it were more interested in Tik Tok videos of scantily clad girls to arouse their attention, shocking!
Hey boss will unplugging the connectors 1 at a time and attempting to atart it still help you find the bad module if the CAN bus cards are possibly bad from water damage, like corrosion on solder points always concentrated at the 3 wire connectir on one end of all 3 CAN bus cards( 2 brown 1 white) Or do i have to buy a new one to even do the test of unplugging the connectors 1 at a time Oh and thank you for your time and your very valuable expertise
Please which part of Ghana are you located? Can you help me with your contact? ..my front SAM, CAN bus were both drenched in water. The 2011 C300 4matic wouldn't crunk... Enoch Koforidua
Bro am having this same issue with a customer c300 2009 and it not starting. So I won’t to start it from the kick motor at the front it starts but refuses to change gear and the parking light was off so I want to go try this now
Hello please I have the same issue . My diagnosing machine complains chassis Can communication , it's not starting .I changed the CAN wires still not work .please help me
CGW is located under carpet at front passenger footwell, next to Distronic control module. Most troubles come from the Front SAM after getting rain intrusion...
@@ADDAUTOMOBILESERVICES so all you did was disconnected the connector & quick erase to get it started ? I’m having the same issue I don’t water damage but my scanner (autel) cannot communicate. It’s shows faults but no start
In Africa, customers just want to see the car start start and go even if it’s not fixed . Africa customers are some way 😆. . Most of them don’t even care about warning lights on dash . All they want to see is start and go
@addautomobileservices hey i have the code 5001 on my 2009 mercedes c300 4matic said theres an internal fault in component cc52 (electronic stability program control unit)
No wonder u can diagnose! Kieth Perkins from L1 automotive training....keep on learning bro.....i hope our paths will cross one day
Thanks for your comment ❤️
THAT WAS A VERY GOOD CAN COMMUNICATION DIAGNOSTIC THANKS FOR YOUR TIME !
I could hear the victory in your voice! Thanks for continuing the recording despite the low battery.
👍 thanks for watching
Thank you So much for the time and trouble to make the content, it was AWESOME, i really appreciate your noble intent, what is worrying is that over 21,000 views,and just 77 People managed to bother with a few minimal words of Gratitude, show's how far Humanity has descended to, perhaps many of those who viewed it were more interested in Tik Tok videos of scantily clad girls to arouse their attention, shocking!
Thanks for watching,👍 and really love you comment
Hey boss will unplugging the connectors 1 at a time and attempting to atart it still help you find the bad module if the CAN bus cards are possibly bad from water damage, like corrosion on solder points always concentrated at the 3 wire connectir on one end of all 3 CAN bus cards( 2 brown 1 white)
Or do i have to buy a new one to even do the test of unplugging the connectors 1 at a time
Oh and thank you for your time and your very valuable expertise
Thanks you
You're welcome
That was an amazing video thanks to my African hero
You’re welcome boss
Thanks for watching boss
Great information thanks for sharing
Good info video sir weldone thks
Thanks
GREAT Video ! 😳👍⚠️
Thanks
Wish scanner is that one to make sure I don’t buy the same too slow
PRICELESS!!!! Thank you!!!
Uwlc
Thanks man
You are welcome
How did you fix the water damage sir?
It was the sun roofl
Please which part of Ghana are you located? Can you help me with your contact? ..my front SAM, CAN bus were both drenched in water. The 2011 C300 4matic wouldn't crunk...
Enoch
Koforidua
I am in accra
Great job as always. So what module had the problem that was causing the short ?
It was a water damage
How’d you fix the water damage ? Having the same issue showing up with srs malfunction and esc & abs and cruise control inoperative
How can I fix ? I have an 2011’ c300 4matic
It was the windscreen
I have that problem on 2013 now after water damage is detected do I just let it dry and go back to normal?
Let it dry first and check if it is working before you do anything
I fckng love you!
Lol
Bro am having this same issue with a customer c300 2009 and it not starting. So I won’t to start it from the kick motor at the front it starts but refuses to change gear and the parking light was off so I want to go try this now
Ok 👍
Hello please I have the same issue . My diagnosing machine complains chassis Can communication , it's not starting .I changed the CAN wires still not work .please help me
Pls have you try to disconnect the CAN one by one
Please I want to connect with you on WhatsApp
Thanks for the video. Were you able to identify the faulty module?
The Customer needed the car to start
👍👍
👍
Great video I have the Same problem but cant seem to find any parts online do you know where I can order these from. Thank you
What part
European and CAN issues. Look for the water. Regards.
Hi, good video.
Can you please tell me where is the control gateway located?
CGW is located under carpet at front passenger footwell, next to Distronic control module.
Most troubles come from the Front SAM after getting rain intrusion...
Yes
@@glasser2819 steering right or left??
Left
Gateway is located on Front SAM!!
Hi i have a problem like this on Mb S350 2089 what must i do? Please help
Pls search for the CAN bus junction under the floor carpet at the drivers side
The damaged ecu was the abs or just the connector ?
The connector
@@ADDAUTOMOBILESERVICES so all you did was disconnected the connector & quick erase to get it started ? I’m having the same issue I don’t water damage but my scanner (autel) cannot communicate. It’s shows faults but no start
Check the CAN lines
@@ADDAUTOMOBILESERVICESWhat is the difference in can lines and bus? My car too has lost communication errors
But everything is working properly in the car without any error on the instrument cluster. Errors just in scanner
So what module cause that?
did not check it
I’m having the same problem with my Mercedes Benz C300 2009 how can I fix it
Check for water leakage in the vehicle
@@ADDAUTOMOBILESERVICES I had water logged in the car. how can i resolve it? my dashboard is malfunctioning already.
Pls check the CAN bus or change the unit
usually the rain leak is at roof connection with A pillar... water ends up funneled in Front SAM fuse box
$$$$
Nice troubleshooting! Did the customer want it fixed or just running? Good video I enjoyed it! Cheers
Thanks boss
In Africa, customers just want to see the car start start and go even if it’s not fixed . Africa customers are some way 😆. . Most of them don’t even care about warning lights on dash . All they want to see is start and go
@@mayydayy8101 yes that is what most of the Customers want in Africa.
Mayy Dayy That what most of the customers want in Canada! 🤣🤣🤣
Like a christmas tree hahahaa. As long as the car starts. Regards pal.
Absolutely no info here!
Lol
@addautomobileservices hey i have the code 5001 on my 2009 mercedes c300 4matic said theres an internal fault in component cc52 (electronic stability program control unit)
Check the abs system
@@ADDAUTOMOBILESERVICES thank you
You’re welcome