Fitting a KAVS 17% Reduced Supercharger Pulley | Modding The Mini - Part 2 | Grinding Gears
HTML-код
- Опубликовано: 9 мар 2021
- Skip To 10:32 For Changing The Pulley!
In today's video we fitted the KAVS Motorport 17% reduced superhcrager pulley and refreshed the oil and gaskets inside the supercharger. I have made a much better version of the oil change which is now live on my channel so go and check it out! Thanks Orranje for the quick delivery on everything as always!
►Supercharger Gasket Kit: www.ebay.co.uk/itm/Mini-Coope...
►Supercharger Oil: www.ebay.co.uk/itm/Mini-Coope...
------------------------------------------------------
Welcome to Grinding Gears a RUclips channel based entirely around cars, ran by me, Jack. I make videos repairing, modifying and building cars for the track, street and occasionally shows usually with help from my good mates.
You can subscribe here - 👉🏻bit.ly/Sub2GGO👈🏻
My Website & Online Shop:
►www.grindinggears.uk
Proudly Sponsored By Mobile Valeting - Use Code GRINDINGGEARS10 for 10% off your valet:
► / mobilevaletingco
Instagram - Grinding Gears Behind The Scenes Stuff & Car Shots:
► / grindinggearsofficial
Facebook Page - Behind The Scenes Stuff & Updates From Me:
► / grindinggearsofficial
Topflight Fragrances - A sponsor of the channel, use code "M121HUB" for 10% off:
►topflightfragrances.com
BMW Mini Midlands Club - A group for BMW MINI enthusiasts, started by myself, drop by & say Hi!:
► / bmwmmc
Copyright Info:
►Outro Template By Grabster - / grabstertv
►Subscribe Button by MrNumber112 - • Free Download: Subscri...
►Blue Boi By LAKEY INSPIRED - • LAKEY INSPIRED - Blue Boi
#GrindingGears #ReducedSuperchargerPulley #SuperchargerService 
Авто/Мото
Nice work mate loved every minute of the video. Thanks bro
Thank you mate glad you did! Thanks for the sub too
Mate I found your work very entertaining. I loved watching your video. Thanks bro.
Thank you mate appreciate the very kind words
Great vid mate ! That old pulley didn't want to come off !!
Cheers mate. Was really on there.
Cooler plugs, 550cc injectors, jcw intercooler and a remap are a must with 17% pulley, otherwise too much air and it'll get hot. Also put more oil into the charger. Great video though.
Hey man, I did a better video about servicing the supercharger on my channel now if you want to check it out. My plan is 550cc injectors and a cam and tune at some point but got to wait... ££££££ - I do have a bigger intercooler to go on. Tune isn’t necessary with 17% but to get most out of the upgrade it certainly is 👍🏼
Only Intercooler and Cooler pulgs are needed, rest is extra but not needed
maybe a daft ? jack, but is there 2 oil gallerys,??? cos after filling on 1 side then maybe you're draining the new oil out of 2nd hole, big respect for giving this job a go on the garden table, i thought it was an expert only job. and you def should have replaced water pump while it was off.
Cheers for your comment buddy, I think i am going to do the water pump lol havent slept properly since. No question is daft mate, I was thinking the same thing but the dude I watched do it did both sides and so I did the same. Maybe i filled it and drained it and filled it but either way it's full now lol! You know me mate garden table does the trick!
cos is one a drain plug and the other a filler, remember when you did gearbox oil, make sure fill plug lose B4 undoing drain plug
@@michaelleigh2446 Very true mate - I awlays hear that in my head when I do stuff like this. Have a search for the channel Mod A Mini who did his and you'll see he does both sides!
Hi mate nice video I'm getting my m45 supercharger this weekend then I'm going to do what you did I've got a project Mk5 fezz 👌 I've ordered my service oil kit to change just the pulley to get next , speak to you soon 👍
Hey man. Thanks for the nice words. The superchargers seem to be quite versatile and have seen them on various cars now. Good luck with the build and feel free to send me some pics on Instagram!
@@GrindingGearsOfficial hi I will do definitely ☺️
Hi mate how u doing can you please tell me whst size pulley I need for the m45 supercharger 15, 16, or 17% one hope u can help me cheers
Dude. There are 2 chambers for the super charger oil. ( after reading your other comments. ). That little bottle of oil , is that size because most of it goes into the supercharger. Something like 55 ml in one whole And 155 ml in the other. Look up either the mod A mini video on supercharger video. Or the mini specialist super charger service. Marian from mod a mini did hers from the S Works kit.
Also. Tip the supercharger upright. Not laying on its side. When filling the chambers. I’ve only ever seen that tip about filling it till it spills out on transmission fluid . Because transmission s. Are a bitch to remove. Hope this helps mate. But defo look up the oil fill amounts before putting it back on ,, or you may be doing it again soon. I will try find the videos and share it with you.
Thanks Steve. Will have another look before putting it back on mate. The mod mini one is quite unclear about how much to use so will have a look for mod a Mini’s one and will address it next video! Cheers again dude. Support appreciated as always
hello, just change the pulley? I don't do anything else? I want to put a 19% and I would like to know what I have to do or if that works without doing anything
Hey Francisco 👋
It will work but to get the best out of it you’ll need to tune it and maybe upgrade your injectors when it is tuned.
Other than that, you’ll also want to get a bigger inter cooler to handle the extra boost and colder spark plugs too. Orranje make a really good kit and it is the one I bought which has everything you need minus the intercooler, I went for an MTC Intercooler.
Hope this helps!
Here’s a link to the kit I purchased: orranje.co.uk/product/kavs-r53-reduced-supercharger-pulley
where can i buy that special tool open that pulley?
Hi Lee. orranje.co.uk/product/cravenspeed-r52-r53-supercharger-pulley-quick-puller - Make sure you grab the right size for your car, standard if you’ve not changed your pulley or JCW if you have a JCW! I do have a standard one for sale, the one I used in this video which id let go for £70 delivered! Let me know if you need it!
I have been sent 3 pulley pullers from cravenspeed and none of them fit my OEM pulley, they are sending the non JCW ones, my pulley looks the same as yours. What should I do
In that case I would say you probably have another pulley fitted already is there any branding?
@@GrindingGearsOfficial all it says on it is "k3" the pulley looks exactly like yours and every other video I have seen
@@GrindingGearsOfficial unless they just keep accidentally sending me JCW pulleys
@@GrindingGearsOfficial just send you a DM on insta, do you respond in there?
@@tylerwagner1806 sure do :)
Hello, where can I buy such a wheel puller?
If you’re in the UK, I have one for sale (if I can find it) or otherwise, orranje.co.uk/product/cravenspeed-r52-r53-supercharger-pulley-quick-puller
top top
💪🏼
Can you use a normal pulley puller?
You probably can although I would recommend the proper tool
do you still have the pulley for sale
Hi Aaron, I rent it out now on my shop, www.GRINDINGGEARS.uk- Thanks :)
Is this pulley 6 rib
It is yes!
Umm... the supercharger was upside down when you filled the oil in the pulley side.
You fill the oil in two places. I made a separate video redoing the oil change as I wasn’t happy with a few things. It’s in my channel now, check it out.