How to Set Up Your New Laser Engraver in Ten Easy Steps
HTML-код
- Опубликовано: 9 июл 2024
- In this video, we're going to show you how to set up a laser engraver. This video is for the absolute beginner, so if you're new to this kind of technology then watch this video first!
After watching this video, you'll be able to set up your own 80W CO2 laser engraver in no time! This video is perfect if you're new to this kind of technology or if you just want to learn how to set up your laser engraver the right way. Thanks for watching!
Stuff We Used:
80W CO2 LASER ENGRAVER CUTTING MACHINE WITH 24" X 35": omtechlaser.com/?ref=neNiGl88
Water Chiller: amzn.to/3FwobBv
Air Compressor: amzn.to/3FwnVT3
Dust Collector: www.harborfreight.com/13-gall...
1/4 inch MDF: bit.ly/3FtiyEl
www.amazon.com/shop/kimandgar...
We love to Do It Ourselves. You love to Do It Yourself. Let's Do It Together. New DIY Videos Every Week!
For more details visit: www.kandgmakeit.com/
Follow us on social:
- Instagram: / kandgmakeit
- Facebook: / kandgmakeit
- Patreon: www.patreon.com/user?u=16643484
Visit our website:
- www.kandgmakeit.com/
\\\\\ MUSIC \\\\\
■
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It! 
Хобби
![mgk - I Think I’m OKAY (with YUNGBLUD) (Sad Version) [Official Music Video]](http://i.ytimg.com/vi/7AC1uqQLIg4/mqdefault.jpg)
Thanks for the intro....setting mine up now!
One of the main complaints about the cooling is that people use zip ties. Yes, the manual says to use them. However, pick up a few good quality hose clamps, you can get all you need for this for less than $5. Even though the connections might be barbed (referred to in this video as 'ridged') the hoses can and will leak without a good seal provided but the right equipment.
Absolutely don't plug everything into the laser (compressor, exhaust fan, and air assist). It's not made for that. This is why the fuse blew because everything was turned on when the laser was turned on. The amp draw caused the fuse to blow. For one, don't plug everything into the laser, it can't handle it the amp draw from all of that.
This is soooooo good. I've been working on the laser choice for month, yes, maybe a year or so and I think with this set up helps me make my decision. You guys are amazing.
Y'all are so cool
Thanks for the easy to follow instructions! This makes the whole process less intimidating for sure.
You're welcome!
Thanks for this! I feel a lot better about setting up when my laser comes later this month
I LOVE your energy! Great job!
Thank you so much!!
Nicely done & easy to understand. You make it so simple.
Glad it was helpful!
Great tutorial 😊
Glad you think so!
Hello. First off I love you guys. You always give great content with your videos. Secondly I have an OMtech laser 60w that I bought in 2022. Never used it because I don’t know where to start. I just need that extra support to get started. Do you guys do one on one tutorials?
We meet with our Patrons all the time AND 90% of them have laser and help others. This might be a great way to get help with your laser and business.
Quick question they sell plexiglass 24" x 36" is it possible to use the passthrough and use this size? Or am I stuck having to cut an inch off the boards (somehow) prior to putting them in the machine? I have the Ohem 80w laser with the 24" by 35" bed.
I have the OmTech 60w CO2. I'm glad you went through the full mirror test. I've watched others do it with masking tape, but they never explained the way they found dead center. I like your way of using the clear packing tape better. I may upgrade my air assist, even though I don't use it for cutting wood yet. I have upgraded the exhaust though, and got that rather then adding a noisy dust collector, I used a 6" inline fan, which runs very quiet and moves a ton of air. Did you get the 3D Printer yet?
We did! We're planning a video on it for January!
Hi guys, could you tell me what power strip you're using for the laser? Thank you.
I see Garrett is “workin” that laser!! Lol. I have the Omtech 60watt laser and totally love it. I was one of the gifted and my mirrors were in perfect alignment when it got delivered and I set it up. 😳
That is awesome!
Nice
Does their pass through operate like GF?
did you guys move this from shop to shop or buy used ?
Do you need a 220v outlet or can you use 110
How you like that laser? I just bought the same from market place and can't find info about it.
what thickness is the MDF?
When you added the exhaust fan did you remove the fan from the back of the machine or did you leave it in?
We add the exhaust and left the original fan.
Kim you are so lucky to have such a handy husband. I have tools...
My hubby doesn't lol.
Oh wow! Lol very lucky he's willing to get in there
Every time I try to run I get an air pressure alarm and machine won't cut. Any ideas?
Sounds like the internal air compressor isn't turning on. I would check the fuse and then check the wires at the power juction/motherboard. Let me know if that helped!
Considering the 80watt 24x36 omtech. Would you recommed it? Any issues?
Hey MHHM! LOL Yep, I have had no issues with my 80 watt. My honest opinion.... go as big as your space will allow. Size and power. ~garrett
@@KimandGarrettmakeit appreciate the feedback
Which laser do You have? Glowforge died yesterday, wanting to upgrade anyhow to the Omtech!
The Omtech basically!
I’ve been waiting on my machine since December 5th, 2023 and it’s January 31st, 2024. No machine. From OMTech
Kim please tie Garretts arms together OR TELL HIM TO PUT HIS HANDS IN HIS POCKETS apart from that it’s a great video
Jesus is the beginning to end, the alpha and the omega
"what is up?" meaningless question are up. Stopped watching at that point.
bummer!