Gal Kremer will this work with bayang toys tinywhop flight controller ? rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263712771527
@@brandonpurdy7658 I know I'm super late on this but the easy way is to power on the radio first and just plug the module power in while holding the sticks where they belong.
Thank you nice review unfortunately this thing it’s no easy to find it’s discontinued do you know what else I can use instead I have same trasnmitter..
@@KremerFPV The Furibee F36 DOES NOT use the same parts as the Eachine E010/JJRC H36. The F36 uses flight control hardware that is not able to be controlled by ANY multi protocol module!
Bonjour Marci de votre tuto.... Mais voulais savoir si possibilité de binder le frysky avec ce module posé sur une rc flysky i6.. 10ch. Marci de votre réponse Bons vols à tous Dronistiquement votre
Bound my i range 7 up to my Syma x11 but the pitch is way deeper fwds than back. The instructions say make sure the TX is AETR order. How do you input that on your transmitter ? Thanks Gal
Hi i have this module an im using a b03 pro but l would like to order a bee brain lite an i was wondering what protocol i should order for it to work with this module if you could help id appreciate it thanks
Hi there. Which quadcopter are you trying to bind it to? The e010? Maybe you just need to power on your remote controller with the sticks on the right position and then it will be set on the right protocol (Check the instructions manual - goo.gl/SjiVNq)
Salut.... J'ai le fsi6, le irangex IRX6, et aucunes connections, idem avec n'importe quel autres types de drones... 😳😳☹️☹️☹️ Je respecte les diverses manips, et.... RIEN.... 😭😭😭😭 J'ai maj la radio en 10 voies, est ce cela qui beug ?? J'espère trouver de l'aide, svp.. Marci
Gal Kremer yes I followed the instructions from the included document. It doesn't work. No lights at all. I believe I have a defective module. DOA item.
You can't change the settings of the quadcopter of course, as it is not configurable through ordinary means (I am referring to E010 and similar quadcopters).
Not sure about the k110, but as far as I know, it's not compatible with Futaba. You need to get a tx that supports Deviation firmware, such as the Jumper.
Gal Kremer thank you. It should be coming in the mail any day now. This should save me from changing out the board on the quad. Any idea if this could be connected to the batteirs of the transmitter instead of trying to Velcro it to the back?
Elevator up + Aileron right will bind the e011. It uses the same protocol as the H8 mini.
Thanks buddy!
No problem! I'm glad I could help a fellow hobbyist!
TheRealJonnyD How do you prevent the switch stick warning when raising the elevator and turning on the transmitter?
Gal Kremer will this work with bayang toys tinywhop flight controller ? rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263712771527
@@brandonpurdy7658 I know I'm super late on this but the easy way is to power on the radio first and just plug the module power in while holding the sticks where they belong.
How to calibrate the drone using this ?
Thank you nice review unfortunately this thing it’s no easy to find it’s discontinued do you know what else I can use instead I have same trasnmitter..
My pleasure. I am sorry but I don't know where you can get it. There are better options out there though.
Thanks. Like your videos. Keep on.
Did you try it with eachine e013?
+Sagi Yosef I tried with another multiprotocol remote but somehow it didn't work...
Hi, could you tell me if you can also connect with the Furibee F36? Thank you.
Hi Frank, yes. It uses the same parts as the Eachine E010: ruclips.net/video/GXb5OkqrGSg/видео.html
Gal Kremer very? Woow thats is cool :-). Thank you!!
@@KremerFPV The Furibee F36 DOES NOT use the same parts as the Eachine E010/JJRC H36. The F36 uses flight control hardware that is not able to be controlled by ANY multi protocol module!
Bonjour
Marci de votre tuto....
Mais voulais savoir si possibilité de binder le frysky avec ce module posé sur une rc flysky i6.. 10ch.
Marci de votre réponse
Bons vols à tous
Dronistiquement votre
No it's not compatible.
Good Morning. Does it work with Eachine e013? thankful.
Hi, as far as I can remember - it doesn't work with the E013.
Friend, do you know if the IRangeX FS-i6 i6x iRX6 connects with k120 or k110 that uses protocol futaba s-fhss
Hi, I don't think so.
Sir Can i use this to my 4drc f4 drone using my flysky i6x remote controller?
Hello, does it work with Flysky FS-I6s transmitter ? Thanks
Yes
Gal Kremer okay thanks.
Posso usarlo con la radio aggiornata a opentx?
Bro can i use this multiprotocol with ky101 drone??? Thanks
Sorry but I am not sure, you will have to check the documentation.
Bound my i range 7 up to my Syma x11 but the pitch is way deeper fwds than back. The instructions say make sure the TX is AETR order. How do you input that on your transmitter ? Thanks Gal
Try to adjust the trims. I don't think that you can set it up in the remote controller.
Hey, its flys fine now, Thanks ;)
Hi i have this module an im using a b03 pro but l would like to order a bee brain lite an i was wondering what protocol i should order for it to work with this module if you could help id appreciate it thanks
Sorry but I'm not sure. Try to reach out to the support team.
@@KremerFPV thanks
Can you still use the modes to select different speeds/ rates and roll/ flip functions with the fsi6?
I don't think that it's possible (Not 100% sure though).
Do you have any information about the module's consumption? How long would a 350mAh battery last? Thanks in advance!
I am sorry, but I don't have this information. I will try to measure it and let you know.
Would be nice :) Thanks again!
hey man,,I have one,,it was OK but I don't what I did,,it can't bind it no more,,do u know how? please tell me..
Hi there. Which quadcopter are you trying to bind it to? The e010? Maybe you just need to power on your remote controller with the sticks on the right position and then it will be set on the right protocol (Check the instructions manual - goo.gl/SjiVNq)
It is compatible with eachine e016h?
Btw the video i so good.. i can fly my eachine e010 with flysky!!!
I don't think that it's compatible with the e016h.
No worries, Have fun!
It does work with E010 and the 011
For me it worked only for the E010, not for the E011...
It does work, bind with elevator up + aileron right.
Does it work with FrSky receivers?
No.
How do you change rates?
could you tell me if it is compatible with Realacc R11, please?
I doubt it but I can't tell you for sure.
Salut....
J'ai le fsi6, le irangex IRX6, et aucunes connections, idem avec n'importe quel autres types de drones... 😳😳☹️☹️☹️
Je respecte les diverses manips, et.... RIEN.... 😭😭😭😭
J'ai maj la radio en 10 voies, est ce cela qui beug ?? J'espère trouver de l'aide, svp.. Marci
Hi, which receiver are you using?
@@KremerFPV bonjour
J'ai réussi à connecter un h36... uniquement.. H8 mini, rien, e016h, e019, sympa x5 non plus.
Le reste du temps, l'alarme sticks se déclenche...
Can i use this for dsm2
As far as I know, yes - but check it out in the supported protocols list.
Is this module compatible with Eachine i6 Transmitter? I can not get it to work with my Syma X5C.
Yes, it should be compatible. Did you follow the instructions? Did it you try binding it to other copters?
Gal Kremer yes I followed the instructions from the included document. It doesn't work. No lights at all. I believe I have a defective module. DOA item.
+ericdaozero If it's not working when a 1s lipo battery is connected, it might be the case.
@@ericdaozero I tried it, it worked pretty well.
Can i use for flysky i6 to bind with beta65s lite? Tq
Well it depends on the radio receiver.
So I would imagine the range should increase a ton?
Yes - but I haven't checked it. My e010 is a goner...
How to change the speed level and acro mode ??
You can't change the settings of the quadcopter of course, as it is not configurable through ordinary means (I am referring to E010 and similar quadcopters).
will it work with the flysky fs-t6?
Yes, it should work
Aceita xk k110? Futaba?
Not sure about the k110, but as far as I know, it's not compatible with Futaba. You need to get a tx that supports Deviation firmware, such as the Jumper.
Will this work with the eachine i6?
+Dale Jump Jr. Yes
Gal Kremer thank you. It should be coming in the mail any day now. This should save me from changing out the board on the quad. Any idea if this could be connected to the batteirs of the transmitter instead of trying to Velcro it to the back?
+Dale Jump Jr. In theory you can modify your remote controller but I don't think that it is advisable.
Could it work for the fs6s too?
FS-i6? Yes
Gal Kremer Thank you for the answer, but i mean te fs-i6s