Flysky FS-I6 antena mod
HTML-код
- Опубликовано: 26 апр 2019
- I ordered 2 sets of these antennas:
www.banggood.com/2_4GHz-6dBi-...
to improve range and allow Me to set antennas as I want on My Flysky FS-i6.
I also uploaded firmware mod to allow Me to use all 10ch via IBUS and to do that I used TTL adapter like this one:
www.banggood.com/FT232RL-FTDI...
and uploaded firmware from this site
github.com/benb0jangles/FlySk...
This movie only show how I modify antennas because I already did upgrade firmware before. 
Развлечения
Thank you for this vid, i did this mod to my remote before even using it once.
Getting into fpv and trying to go long range.
Turned out great. Honestly my biggest surprise was to see they bothered to put two antennae in.
And I made a hobby radio :D
I know eh? That kinda threw me too. Decent radio for the money.
Man, I wish I could comment something better than this but heres what I would like to say. Watching this never gets old.
I expected another hate comment :) THX :)
Thanks best antenna mod for the flysky I have seen. I just ordered a set.
THX, I change antennas in most toys I have :D
What kind of extended range did you receive?
What's nice about this is you can easily attach an amplifier to it as well
So far no need for that but yes, you can :)
I put an amplifier on my land radio for RC speed runs and the distance is massive now.
@@KaizerTest What type of amp did you used?
Thanks! This was a very carefully documented and tidy mod, that I'm sure works very good, giving you more control of antenna orientation.
I'm wondering if you have considered or tried to use 2.4ghz circular polarized antennas with this mod, or maybe one dipole 5dbi with one 3-5 dbi cloverleaf antenna. I guess we would need to test with similary circular polarized antenna on aircraft. It is difficult to find 2.4ghz circularly polarized antennas, but I sure would like to see the results of this test. What about using a helical or yagi antenna connected to one of your SMA adapters for very long range applications?
I am ordering new long 5dbi dipole antennas to do this mode on my FS-i6x Tx too. Good job! - Jim
If You have connector than You can test some antennas like directional, but that would limit it to one direction
Is your nickname Mumbles? 😂 Nice work Adrian! 🙂
Nice, very good!!!!
Improved signal only, or improved range as well
I think both :)
Does not work .
@@myname2263
Please explain...
What do the plastic arms on outside have in them an the large end piece of what you removed was called the load an the radio is tuned for them 2 loads by u replaceing them with out retuneing the radio for your new antennas youll harm your radio an your items it runs
Actual I just changed angle of antennas because inside are the almost the same antennas but I can change angle :)
I did this mod on cheap toy with a very cheap remote that in stock have 30m max and upgraded it to 70m and more :D
I did not check full range of that upgraded toy but it's a huge difference !!
Fajny filmik Zrobiłeś :)
??
:D
Great job! How much longer did you go with these?
I don't fly for long distance but so far GPS reported 110m but that ware not a range test :)
@@Adrian202 i made 200m with this mod
I made 200m too with a nazgul5
this control can make close to 2km original...
Raxmat 👍
Good video. Nice controller
THX
Awesome work
Thank You :)
Ciao scusa posso chiederti che combinazione usare per arrivare a modificare l'end point del canale 6 di destra ..riesco a modificare tutti tranne quello grazie
I don't have radio with Me now but You have it in menu under endpoint if I remember :)
Thing is that you can only use one antenna at the time, if you go to the FACTORY menu, you will be able to select LEFT or RIGHT antenna, but not both.
Yes but remote is switching if one antena don't have good signal it will switch to second one in another orientation :)
@@Adrian202 That is ok for Diversity Receivers, but in this case you are transmitting with the Radio, what you can do is to install a patch antenna on one output and the regular omni on the other, that way you can switch from the menus. what antenna you want to use
both the normal antennas work at the same time, so I do not see why this mod will work any different..
Hi, what kind of antenne dbi ? Lenght and how long are those cable connection ? Please ;)
I ordered these antennas:
www.banggood.com/2_4GHz-6dBi-50ohm-Wireless-Wifi-Omni-Copper-Dipole-Antenna-SMA-To-IPEX-For-Monitoring-Router-195mm-p-1193324.html?p=5G2717320323201310AJ&Adrian&
I think You can find cheaper ones on Aliexpress
You can use any antenna from 2.4GHz WIFI
Cable You can cut, shorter cables better but keep some spare in case of some future disassembly or modifications (shorter than 1 meter :D )
Untuk yang sudah dipasang multiprotocol apakah bisa
I think much better of the bateries change by the baterry charger...its.make the big defferent
I use Eneloop rechargable batteries and they are best in world and only one that are made in Japanese :)
Hey,i need to knw that do u have to upgrade the firmware?If i need to connect only the antennas do i still hv to upgrade the firmware ?
No need for firmware, changing antennas is a hardware mod :)
@@Adrian202 yoo thank you soo soo much...im new ro this stuff so im trying my best to learn these thing❤thank you bro god bless u❤
@@Dexter-dz4bp We all learn :)
how to upgrade its range? Would you please tell me?
You can change antennas like I did and that will allow You to set a better angle.
There are also directional antennas, but you will not be able to fly around You.
The Last option is signal booster or extenders, but I think that's expensive
I loathe the color navy blue... has anybody taken off the stickers and removed the gummy glue with acetone on theirs?
I don't mind that color :)
How is the range now? How many meters
I did not test how far I can go but when I let My friend fly My Predator electric glider and wind took it away on about 500m I still been able to control it and turn it back :)
what do you use to make holes in the remote body?
I start with normal drill and that try if this one will be in same size:
www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220517044443&origin=y&SearchText=step+drill&spm=a2g0o.detail.1000002.0
I used my nose with a drill bit taped on the end. I just spun around really fast and it worked fine.
fitting into the base of the front of the handle would have cleared all the switches !
That is also a good idea and that will just depend on Your imagination :)
Because of angle how I hold it there is no problem with switches on this remote :)
On Turnigy 9X I would not be able to do this :D
That’s what I did.... x2 10dbi antenna at base of handle on the handle. Came out real good. (Just needed to notch out a piece of plastic on one side to allow cable coming off SMA to not get pinched, right side is already notched for existing antenna. Never liked just replacing the main antenna and not changing the other.
@@johnnylightning5242 All depend on Your skills :D but Yes I seen people mount it there also< I just put My antennas in this spot because it's much more easy :)
You can use a 2.4ghz amplifier and use only 1 antenna please try it bro
Yes, until You keep it in the same position, for drones 2 antennas are better because if drone change orientation than second antenna take over.
Also, not always it's legal to use amplifiers.
Ok bro thabks
Informative but need to turn up the volume and listen close as he tends to mutter and can be hard to follow.
I do My best :)
Hey, I'm assuming that you used the same 6dbi antenna on both the sma ports. Wouldn't it be better to have one 6dbi (or higher) and the other one 3dbi ( or lower)?
As far as I understand transmitter switch antennas when lose signal on one of theme.
Mounting on antena weaker will force using that bigger so that will also work but not as good.
Depending on model and how antena on receiver is set it's good to not set both antennas in same orientation because always one antena will have connection if model will rotate :)
it gives nothing, nada i have tried tested on matek 411.
I solder to signal and ground both connectors and it's working great but I did not test it before but this mod allow Me to adjust antena direction and that is the main reason and I also can put direction antennas now.
Some radios may have good antenas already so no need for this mod there
How long the range do you got? Before and after
Salam From indonesia
Before I did not wanted to fly far because I did not have RSSI so I could not know when I will lose signal but blackbox say 120 meters.
New movie I uploaded show 150 meters and still 50% signal on the other side of houses (VTX also started to lost signal) but I tested that on Crossover RX so check out new FPV mowie :)
It same i6x.?
I6x got 10 channels and I6 got 6 channels, they also say that I6x got new firmware compare to I6
without mod...2.3km thats 1.4 miles....what has your mod done?
without mod antennas are set like they want so You will not know if they face drone and after this mod I can set theme as I want according to My flight type and how receiver antennas are set
Without mod 2.3km ?? where did You read that :D
OK, I did check that ans stock radio have 1km in a perfect world and I wait for receiver that will extend that to 2km also in perfect world :D
My fsi6x does 2miles for fun...standard. awesome radio. Nothing on the planet touches it for the price.
How much for heights meters flysky i6 Normal
about 80-100 meters but I never test that :)
All depend how antena on transmitter and receiver is set
@@Adrian202 and how much for range meters flysky i6
@@mae3426 Range is circular so We talk about circular range but that will depend on many conditions so normal is about 80 meters in all directions depending on how antennas are set
@@Adrian202 yes thank 😍
Ola este cabo pgtail e de 10 ?
Sorry, I did not understand :(
@@Adrian202 what cable did you use to connect the antenna to the radio plate
@@cabraldrone3938 This one:
bit.ly/31G22Mk
How much range does it increase?
I did not measure it but when wind took plane away about 200+ meters I still control it :D
None , it does not work
What is the range after mod?
I did not test full range but 130m confirmed and I think I can fly much longer distance but I don't have RSSI on My drone
why bother , you can get 5 miles range with it out of the box with no mods
Yes you can but in some cases you gat only 200-300 m
@@satiaxsanti1 try not standing inside a tin shed when using the transmitter , your 2 - 300 meter range will dramatically increase
@@satiaxsanti1 ok I was kidding about the shed ........placement of the antennas on the model has a lot to do with range , make sure the antennas on the receiver are 90 degrees to each other for a start , and keep them away from any other wiring in the model , especially the motor and ESC
@@aussieaeromodeler Thanks for the advice, sorry for my English
@@satiaxsanti1 no problem , happy flying :)
هل يوجد في مصر
I'm from Poland
@@Adrian202 stop
@@Adrian202 You have my support from Australia bro!
Ну-с, что скажут русские кулибины, имеет право на жизнь?
this mod did nothing ..... still rx los at 50-100M
This will depend on antenna, You should try different antenna and see if that help,
Receiver and transmitter antenna orientation is very important in long distance communication
can you speak up and quit mumbling
I like You to