Cool vid . I have a friend who has one with hard to buff ink in it . It’s awesome for tags on concrete or fences . You can also get paint through it only a little watered down if you strain it through fine strainer . You have to empty it after use or the paint can sometimes set because of the amount of oxygen in it . ❤️🇦🇺❤️✌🏿✌🏻✌️
Hi, our vehicles and building keep getting graffiti. We caught one of the vandals Monday and broke his hand, but I thought we should have broken his shoulder to prevent holding up a spray can for a few months. Which would you suggest??? TIA
They're ok when you need something to be diluted or to paint foam so it doesn't melt. But the can control is not very good. Mind you, same with this You can product
To be honest, in order to be able to spray you have to dilute the paint a lot. So it probably won't get stuck. I used mine a couple of times and thought it wasn't really usable
Your purchased Paint, correct type of Paint Thinner, & pressurized liquid butane. 60% paint fill. Im a little unsure. Puncture can to release pressure, dril & install presta air valve.
I dont believe in this while using air, need lasting pressure like real aresol. I need to pull it from storage & try real butane, & i think 60% paint fill. I need to see the use with my new wide jet fan caps, & trying to get pearl paint to spray.
@@olivierroubieu well then i will check & replace the seal, or i will have to resort to a used spray can with presta valve mount for my needs. I pulled up some proper fill facts recently & usable adapters. I dont like the air, it wont last long enough, provide consitent pressure, & it oxygenates the paint. Im ready for a upgrade, becuase i like paint, but hate cleaning paint sprayers & air brushes, but find it easy to unclog a can or cap. Basically i want to prove people wrong, im a diy crafter/painter.
It's not so much a problemof pressure, it's the lack of thinner in the paint, so it doesn't come out thin enough, so you need to put too much water to make it usable on anything useful. It's a fun gadget, but that's it.
All this youtube reviews about the product is useless. He just say i dont know how many pumps i should do, then there is another guy trying to fill it and cant fill it. this people look like they cant read the items information booklet.
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
How useful would this thing be as a transfer can (ie. slapping a transfer cap on it and using it to refill other cans with it)?
Your suppose to use a pressure gauge the maximum is 100psi
Cool vid . I have a friend who has one with hard to buff ink in it . It’s awesome for tags on concrete or fences . You can also get paint through it only a little watered down if you strain it through fine strainer . You have to empty it after use or the paint can sometimes set because of the amount of oxygen in it . ❤️🇦🇺❤️✌🏿✌🏻✌️
yeah I emptied mine, I think it can be cool for paint effects
Hi, our vehicles and building keep getting graffiti. We caught one of the vandals Monday and broke his hand, but I thought we should have broken his shoulder to prevent holding up a spray can for a few months.
Which would you suggest???
TIA
where did you buy your bomb? are there any in France? It's amazing!!
nice! what do you think about the MTN WaterBased cans?
They're ok when you need something to be diluted or to paint foam so it doesn't melt. But the can control is not very good. Mind you, same with this You can product
Great video, very informative!
The fineness is all about thinning..
Is it permanent/waterproof with only acrilics and water?
The problem I see with this, is if you use it for paint and leave the paint in the can it will get hard and ruin the spray nozzle.
To be honest, in order to be able to spray you have to dilute the paint a lot. So it probably won't get stuck. I used mine a couple of times and thought it wasn't really usable
Run acetone through afterwards. It will clean the tube/nozzle.
@@olivierroubieu I think pressure is important. 100 psi will blow nice, even thick paint.
@@wd9102 if you have more than 50psi only air would come out, the paint wouldn't get a chance to come out
@@olivierroubieu Can you explain why is so? I know mos of the cans are filled at 80 psi and can withstand 200 psi.
Are there directions on how many pumps needed or parts paint/ink ratio?
Watch art primos video
maybe place a skinny cap also a correct amount of paint mix let see what happens "great video"
Thank you. Yes as I was reviewing the video, I thought I should have tried with a skinny.
How can i buy this?
Must of not put enough air in it or it not made for spraying on a vehicle.
Do you have any suggestions of how to refill old empty spray paint bottles?
As in refilling spray cans ? You CANNOT LOL
Your purchased Paint, correct type of Paint Thinner, & pressurized liquid butane. 60% paint fill. Im a little unsure.
Puncture can to release pressure, dril & install presta air valve.
I dont believe in this while using air, need lasting pressure like real aresol. I need to pull it from storage & try real butane, & i think 60% paint fill. I need to see the use with my new wide jet fan caps, & trying to get pearl paint to spray.
I would definitely not put butane in this! The seals are not designed for it, this would not be a good idea.
@@olivierroubieu well then i will check & replace the seal, or i will have to resort to a used spray can with presta valve mount for my needs.
I pulled up some proper fill facts recently & usable adapters.
I dont like the air, it wont last long enough, provide consitent pressure, & it oxygenates the paint.
Im ready for a upgrade, becuase i like paint, but hate cleaning paint sprayers & air brushes, but find it easy to unclog a can or cap.
Basically i want to prove people wrong, im a diy crafter/painter.
If he actually knew how much pressure he put in the can the review could have been better
It's not so much a problemof pressure, it's the lack of thinner in the paint, so it doesn't come out thin enough, so you need to put too much water to make it usable on anything useful. It's a fun gadget, but that's it.
yeah right. like I said
All this youtube reviews about the product is useless. He just say i dont know how many pumps i should do, then there is another guy trying to fill it and cant fill it. this people look like they cant read the items information booklet.
I tried a few different ways off camera, this product is a gimmick, can't use it for anything besides drips.