I'm honestly surprised that there aren't more refillable cans like this out there. Super stoked. Looks awesome and it's super cheap. You could make a low pressure can without paying a ton of money.
Sure Shot is the original. I've been in the Auto Bosy industry for 30 yrs and every shop I've been in always had several They come in a variety of colors and they have replaceable brass spray nozzles and even rebuild kits for the wear parts.. I think they run around $60-$75 bucks. Double what they were when I 1st bought one.
You should have done a few more examples/demonstrations with what type of inks or dyes we could use in it like a home made rusto mix or like a thinned house paint or something
You can make a really janky version of this with a Gatorade bottle, sawing a valve off a can, gluing it to the screw on cap, punching a hole in the side of the bottle and epoxying a bike tube valve in there. It lasts for a day of painting. Maybe two or three if you get lucky. It's cool to see a more professional version. Definitely worth $25 if you have a lot of old Krylon and Rusto colors that don't spray anymore and want to get that paint onto a wall or train. Don't put house paint through a spray valve. It's too dense to spray properly. The best you're going to get is a weak piss stream out of a blaster cap. You have to water it down so much that it's worse than Krylon yellow.
3:40 What I always do in a case like this is to use a valve-core-removal tool to partially unscrew the valve-core (although this often does not actually let much of the air out because the spring-loaded valve-core still seals until it is unscrewed completely, so I hold the tool firmly "inwards" as I gingerly unscrew the core so that the core won;'t come flying out and hit my eye or get lost; that way, I can let the air out more slowly even with the valve core actually unscrewed all the way) and let out the pressure safely/gradually before opening the can all the way.
One4all works for that. I was in a hobby store and looking through the paints and one said it can be used as a glaze and noticed it was water based. I went home took some glassware and applied all4one, and popped it in the oven. It worked and held up very well. I could scratch it off with my finger nail so I took a razor to it. It took a fair amount of effort to get it off.
I've been waiting for a review for this thing for a good while. Thanks for posting! I'd love to see it used with different caps/tips, and have a comparison to using the same caps on the original cans. Also, perhaps what difference the pressure makes. (Since they sell low pressure and high pressure cans). I'm interested in using it with acrylic (Montana) paints, so maybe there's a semi-non-toxic solution to use indoors? thanks for a great channel and great reviews.
This is SOOOO weird man, I've been thinking of MAKING a something exactly like this for the last two weeks, for cleaning my caps, with acetone and all.
can you do another video of this can with maybe other paint mixes etc maybe do a throwie or something with it, i might get one but im not entirely convinced yet
no i meant if he has review on the specific color, im not talknig about montana gold can, im talking about the color Gold or Copper (think they're really simillar) idk which can has the best Gold/Copper color, im thinking about the Molotow Burner option or Ironlak Reload
I tried aerosol paint mix from other spray paint cans & it did not work at its standard thickness. don't want to thin the paint more, just want it to mod it to work like a spray paint can with atomization. thorough testing but will see what a regular paint can does with a refill Schrader valve.
When he said “Creative Buzz” I Felt That. When I write & when I Produce music that’s the shit that makes me go for it all & keep on going! #GreenRangerRocks
I want to paint you like animal, I want to spray you in the inside, help me, I didn't shake my can, help me, I broke apart my stem I don't think I can forgive you for making this vid GR. If I loose self control, I'm going to go broke buying dye and a you can.zz
you always bang on about how sexy an ny fat was on a krylon can back in the day and you got the perfect opportunity to showcase it and you blew it, thats why i asked the question.
I can't use this product with water based or rubber based paint products, oxygen inside dries the paint, correct?? but a can of repellant that just sucks up paint, doesn't expose the whole batch to air dry out. what's the right solution? My Rubber paint is air dried fast. so shouldn't I use other compressed gases?
Thanks for this reply. The beauty of reading before asking. I was coming to ask how to prevent that from happening. Boom jacquard right there for the clutch answer! Thanks again
Hi all, I’d like some advice on what are the best markers for beginners. I’ve always liked doodling or making silly tags but I’d kinda like to get into this seriously. I’ve heard about brands like Krink Montana or Molotow but I’m clueless about what to choose. Thanks and have a good day :))
Cool. You should make a video about filling one of them garden weed sprayers with paint. You can do like 6 foot flare tags with them 😂
We did on Insta. Maybe we'll do that here too
Yeah the insta video was great, GR should experiment more with them theyre real fun
D P didn’t catch that. I’ll go check it out.
CheeeezPIC I'm down
what's his name on Instagram ?? I'm trying to check that out .. good looking for replying
I'm honestly surprised that there aren't more refillable cans like this out there. Super stoked. Looks awesome and it's super cheap. You could make a low pressure can without paying a ton of money.
There are though they’re just called spot sprayers / break cleaners / a couple other things, they’re all over the place.
Sure Shot is the original. I've been in the Auto Bosy industry for 30 yrs and every shop I've been in always had several They come in a variety of colors and they have replaceable brass spray nozzles and even rebuild kits for the wear parts.. I think they run around $60-$75 bucks.
Double what they were when I 1st bought one.
4:30
“As you can see”
Can:”YOU CAN”
In the 80s in the uk i had one called the jenni can it was green and white with many different spray heads, same idea using foot pump to refill
I'm waiting for you guys to get kobra spray paint
What every one in the game has been asking for, FOR YEARS!!!!!
Thank you for putting this video out! I’ve been reallllly wanting to try this
Love the closer drumbeat, good choice
Regularily paint-buffed city hot spots w this 💣💣💣 massive hollows and hands, running longer than ever before !!
You should have done a few more examples/demonstrations with what type of inks or dyes we could use in it like a home made rusto mix or like a thinned house paint or something
frank lowkez Basically can use whatever provided it’s thinned to a milk like consistency.
It sucks really bad, dont buy it.
Gonna need to see a fill with that
Thank you so much! Did not understand it fully until this video!
“Make Krylon Great Again” hats GR those would be so dope definitely would buy that!!
Definitely...
GR !! Brotha take advantage of that description section and hit us with some links !!
P.S. still waiting on a "deadbeat" tag brotha!
Listed!
Waited for this Video so long thx Idol
Yeah sorry. Had some technical issues lately.
We need these to save the ozone
Modern sprays don't have CFC's in them. Haven't had them since the 80s.
D P don't player hate man
Midnight Rider Oh were being ironic? My bad. Just trying to help. 😆
I just got one and use it full of acetone to clean caps it’s a life saver
You can make a really janky version of this with a Gatorade bottle, sawing a valve off a can, gluing it to the screw on cap, punching a hole in the side of the bottle and epoxying a bike tube valve in there. It lasts for a day of painting. Maybe two or three if you get lucky.
It's cool to see a more professional version. Definitely worth $25 if you have a lot of old Krylon and Rusto colors that don't spray anymore and want to get that paint onto a wall or train.
Don't put house paint through a spray valve. It's too dense to spray properly. The best you're going to get is a weak piss stream out of a blaster cap. You have to water it down so much that it's worse than Krylon yellow.
3:40 What I always do in a case like this is to use a valve-core-removal tool to partially unscrew the valve-core (although this often does not actually let much of the air out because the spring-loaded valve-core still seals until it is unscrewed completely, so I hold the tool firmly "inwards" as I gingerly unscrew the core so that the core won;'t come flying out and hit my eye or get lost; that way, I can let the air out more slowly even with the valve core actually unscrewed all the way) and let out the pressure safely/gradually before opening the can all the way.
You think it‘s gonna work with something like just wallpaint?
You had to provide the purchase link for the can
That Nine Inch Nails instrumental when he was pumping it up though
Low key Keith Haring tribute with the shirt at the beginning and his book too. Love it
Yay new vid!!! 😁
Dang ! reminds me of when i used to bomb with fire extinguishers haha.. great review as always GR !
/CUTA
thank you for making this video🙏
I have bin wating for this thanks so much for the review
If there's molitow one4all...
You think there's a Graffiti remover called all4one????
😂😂😂😂😂
gr chilling in his office, laughing at his own jokes. nothing like it
leme get uhhhhhhh number ENZOE w a side of dry jokes
Howdy green ranger, I’m a ceramics student and was wondering if you can shoot glaze through there??
Felipe Tascon most likely if it’s not too thick
One4all works for that. I was in a hobby store and looking through the paints and one said it can be used as a glaze and noticed it was water based. I went home took some glassware and applied all4one, and popped it in the oven. It worked and held up very well. I could scratch it off with my finger nail so I took a razor to it. It took a fair amount of effort to get it off.
Would this can work with a straw, like the one used on WD-40? Great video...
Why does this guy seem like he'd be really cool to hang out with
GR, do you blaze up??
Im also an new subscriber and i think im the only subscriber from greece
Greece is very nice
SUPER CLUTCH
do a marsh and garvey mix and test it out. then do a buff test
this thing would be cool, pair it up with your stencil cap, and pour all the extra into it.
That's a pretty interesting product man ! I would love to see how it does with different inks and dyes :)
does this mean i can empty a rusto into this can and use it if with a female valve at a good high pressure
Mohamed Amer rusto good as is
I've been waiting for a review for this thing for a good while. Thanks for posting!
I'd love to see it used with different caps/tips, and have a comparison to using the same caps on the original cans. Also, perhaps what difference the pressure makes. (Since they sell low pressure and high pressure cans). I'm interested in using it with acrylic (Montana) paints, so maybe there's a semi-non-toxic solution to use indoors? thanks for a great channel and great reviews.
Ironlak made a spray dye too
Dude, very good instructions about building up on the pressure you need. Solid safety advice for the non techie.
jim noyb lol you mean idiots?
Can you imagine a cooler job than working for a graff company? Man that would be so cool.
This is SOOOO weird man, I've been thinking of MAKING a something exactly like this for the last two weeks, for cleaning my caps, with acetone and all.
need to get two at the first of the month, cant wait to try it with mtn waterbased and one for outside use
What number of cans constitutes as "bulk?" Been ordering stuff from AP every week since I got made
Can you leave paint in it or do you have to clean it out after each use?
Freaking love this review!!
Next, you should do a cap test with paint.
would this work with roller paint??
can you do another video of this can with maybe other paint mixes etc maybe do a throwie or something with it, i might get one but im not entirely convinced yet
Yo GR, you guys gettin anymore Dr Guts silver in? Missed the chance to cop that shiz last time :(
More black book sketches, their the besttt
Yo GR what beat are you using in the beginning
can you use it to just spray air?
Do you have a review on any Gold Chrome can, im really interested how it paints
The Montana Gold one? We should do that.
no i meant if he has review on the specific color, im not talknig about montana gold can, im talking about the color Gold or Copper (think they're really simillar) idk which can has the best Gold/Copper color, im thinking about the Molotow Burner option or Ironlak Reload
aaa bbb yes the specific color by Montana Gold.
I don't remember how good it is, and I know GR can do a better review, go check out warpaintgolffive. there's a few reviews on it
While filling in the air, turn the can sideways, or upside down... Lets see if the paint leaks into the air pump or not.
Fire extinguisher video needs to come soon after this haha
Does this work better than an airbrush? I'm looking to clear coat ceramic coffee cups
3:18 I dig the closer excerpt
I live in The Netherlands plz tell me where I can buy?
I got mine from the UK and I live in Germany
Kalle Issa link plz
MAURO HD™ Graff-city.com
I tried aerosol paint mix from other spray paint cans & it did not work at its standard thickness. don't want to thin the paint more, just want it to mod it to work like a spray paint can with atomization. thorough testing but will see what a regular paint can does with a refill Schrader valve.
So what exactly was that krylon stuff you were talking about?
Was it a color they stopped making,
When he said “Creative Buzz” I Felt That. When I write & when I Produce music that’s the shit that makes me go for it all & keep on going! #GreenRangerRocks
Ruben Mexicano My dude! 💪
would love to see a chalk tag! love the vids
All what I needed
Very cool video !!!!
If you fill it inverted then the fluid doesn’t come up the dip straw?
I want to paint you like animal, I want to spray you in the inside, help me, I didn't shake my can, help me, I broke apart my stem
I don't think I can forgive you for making this vid GR. If I loose self control, I'm going to go broke buying dye and a you can.zz
give this man a medal
Can u make a video where u put house paint in the youcan
what is the cap on the now spray paint at 4:40
you remind me of my old guitar teacher
DylanDinosaur 😆Awesome
why didnt you use the ny fat fo the krylon paint?
To show how it actually sprays with stock tip. We will do more. No worries!
you always bang on about how sexy an ny fat was on a krylon can back in the day and you got the perfect opportunity to showcase it and you blew it, thats why i asked the question.
Yo craft punks gonna be chasin you for that sample! ;)
Nice vid man!
how do you manage to always tip things over in your videos? 😂
Amazon has a little spout adapter with a short hose that fits most chem cans with an opening that size... works on my marsh can!!
I put my athlete's foot cream in this shit. Works like a charm.
I can't use this product with water based or rubber based paint products, oxygen inside dries the paint, correct?? but a can of repellant that just sucks up paint, doesn't expose the whole batch to air dry out. what's the right solution?
My Rubber paint is air dried fast. so shouldn't I use other compressed gases?
Cool
Question, since you said anything, can you put lotion in it as well. Does anyone know if it works.
You gotta do a BIZ hit up my dude!!
BIZ . BIZ ONE . BIZZY . MR. BIZ
Or any you can think of
BIZ
FRESNO CA
Could you use the you can to fill up a Montana mini can with flow pen ink?
OOOOOH yee hopefully they have good valve quality like montana gold ;)
Haha nice NIN sample. Old man. Lmao. Love ya homie
Lol yeah love that
Couldn't get mine to work with the stock tip.
Can a tube be attached to the nozzle?
Will Dwyer wat? You mean to shoot paint out like an extinguisher? Unfortunately no.
If you completely depressurize the can before attaching the Adapt-Air, you shouldn't ever get paint shooting up the bike pump hose!
Thanks for this reply. The beauty of reading before asking. I was coming to ask how to prevent that from happening. Boom jacquard right there for the clutch answer! Thanks again
Where do you buy these ?
I found this because I was trying to think how I would make my own pepper spray if I was so unfortunate as to live somewhere that it was illegal.
Try to make an fillin with these cans. I want to see what you can and cant do in video 👍
1:18 You didn't show us an adapter before now :P
What caps do you recommend
What is that aluminum vessel he put the mauve in i wanna get one
this guy rocks
you are supposed to pour the acetone on its small side so it doesn't make bubbles and spill
Hi all, I’d like some advice on what are the best markers for beginners. I’ve always liked doodling or making silly tags but I’d kinda like to get into this seriously. I’ve heard about brands like Krink Montana or Molotow but I’m clueless about what to choose. Thanks and have a good day :))
Any cheap ones for beginners, but I really like Molotov pump markers, or anything really like pentel, pilot, sakura. All that good stuff.
Hla donde consigo ese producto en argentina
whats acetone in germany? mayb im stupid but i dont know it :)
Or mineral spirit from the hardware store.
I would need like 10 of these things
OG