The ESC you replaced is for yaw and roll, pitch one is with the IMU board behind the camera... You were just lucky that you got the matching ESC otherwise you need to put the bell from the stock motor or try a couple of yaw motors to match your ESC board as these boards are programmed to match the orientation of magnet in the bell of motor.
Also, the reason for this issue is because the yaw motor is calibrated to be centered for the yaw motor that came with the drone, which is based on the magnets in the motor cap. If you replace the yaw motor and you do not use the stock motor cap, the chances of you having this issue are high. Now, the solution to this can either be that you replace an expensive ESC, or you press off the motor cap from your old motor, press the one off the new motor, and press the old one on the new motor. It takes 5 minutes and costs zero dollars. Alternatively, an authorized DJI center (if you have any) can program the motor to be centered. Finally, you can do this.
When your working with the boards you should always use gloves for statistic ele. if you don't you can short the board out you also should have a grounding strap on
The ESC you replaced is for yaw and roll, pitch one is with the IMU board behind the camera... You were just lucky that you got the matching ESC otherwise you need to put the bell from the stock motor or try a couple of yaw motors to match your ESC board as these boards are programmed to match the orientation of magnet in the bell of motor.
Also, the reason for this issue is because the yaw motor is calibrated to be centered for the yaw motor that came with the drone, which is based on the magnets in the motor cap. If you replace the yaw motor and you do not use the stock motor cap, the chances of you having this issue are high. Now, the solution to this can either be that you replace an expensive ESC, or you press off the motor cap from your old motor, press the one off the new motor, and press the old one on the new motor. It takes 5 minutes and costs zero dollars. Alternatively, an authorized DJI center (if you have any) can program the motor to be centered. Finally, you can do this.
rustler08 I tried changing the cap but it didn't help me.
Hello, where did you get the ESC you replaced, I need one ty
Where did you bought the esc controller? I have the same problem with my drone. Thanks for posting this!
This happened to me this weekend. Where do I get the part? I need it fixed Now!!!
Sir
I wanted to know about this controller
Are they both are same I mean phantom 4 and phantom 4 pro that circt bord.
The plat you take off gets really hot on my phantom 4 it does the same thing is yours did
Does this also solve the problem of shaky videos? jello effect? I had this camera problem out of center and now I have shaky videos
Y change the yaw motor and the gimbal point like this, but is for the magnet semsor in the motor. If y buy this board, works for my?
How do I get the widget you put on the cable?
Where can I buy this component, and what is your reference?
RIP Chester
No need to change motors! Just rest the drone on rear motors facing camera upwards and do a gimble calibrration! Thats it
good
God bless you.Thanks for sharing.
This sircut board how much in Indian RS. Pls riply
Hi
I wanted to show you the video of my gimbal please can you let me know the issue
Please can you let let me know where I can send that video..
Hi bro
. Are u sure . This is the reason for yaw to the left.Speed controle board not yaw motor
what is with the gloves?? to dirty for you??
When your working with the boards you should always use gloves for statistic ele. if you don't you can short the board out
you also should have a grounding strap on
Hello where can we find it.
I was trying to find out on eBay and Amazon but no success.
Please let me know please