$28, two hours of my time, and this video saved me from buying a whole new drone. Thank you! I'm going to purchase something from your store as a thank you soon!
I just flew my Phantom 4 and the entire gimble assembly was dangling from the ribbon cable. Thanks to your video I took the P4 apart and fixed the issue. The 4 screws came loose from the dampener bracket @ 29:26. Great Video.
Thank you so much for this video. I believe my dampening plate is bent causing my issues where camera is to the side and goes back and forth. I was able to follow your video perfectly and I even called you about this issue and you gave me direction on starting with replace dampening plate. If that doesnt work to replace the Yaw arm and then finally replace the esc chip as last option. I really appreciate your time and efforts,
At 8:40, the area you're working on, makes a weird noise, therefore my gimbal doesn't work properly. I don't get a error message but the sound is weird and it has a very smooth vibration that makes the image wooble. Now, seeing your video I'm willing to open the main logic board myself but out of your experience can you tell what the problem could be? The video is amazing ,the soundtrack is so calming. Thank you .
I got to the final step on the removal, but 2 of the little screws were in tight I could not get them out. I guess I will have to take the heads off and hope I can get them out with small needle nose pliers, but it seems doubtful. I will also have to replace those screws and heaven knows who sells them. Great video!! Very helpful.
Excellent insight to what's inside my Phantom 4 ! What powered screw driver unit are you using ? I'd suggest using a magnetic work mat to secure those runaway little screws . . . Thank you for sharing !
Great video and a big help for me. I recently crashed my P4 and it hit hard enough it dislodged one of the 4 internal dampening mounts the bracket hangs from. Just followed this video and finished putting it back together. On thing I did notice though, was that the L shaped bracket you put back on at 31:40 is opposite of they way it was when you took it off, and opposite of the way mine was, although I'm sure it's likely okay either way..
thanks for the video ! it helped me a lot. even after replacing the arm, my gimbal still wobbles. I figured it's the bad yaw motor. Couldn't find the yaw motor with wide mounting screws layout. the yaw motor in your video is the new design. can you help me on this please ? Thanks in advance
Do you know what size the 2 screws are that attach the roll arm to the roll arm motor because i need to buy 2 as mine ripped out of the roll arm thread. Great videos by the way.
Hi, what is the name of the board that you removed at minute 10. I need that part but can´t figure out what is it´s name or number part to buy it. Thank you!!!!
hi I need some advice please. I recently purchased a Phantom 4.. and typical of me.. I panicked and crashed it.. no serious damage per say BUT two of the propellers have a scuff on them.. now is it safe to fly with those two scuffed propellers? or do I need to replace them? thanks awaiting your reply.
Hi Wathana, have you had problems with camera yaw position post yaw motor replacement? i.e. pointing left or right and not in center? I've heard that hey use magnetic sensors/hall effect to determine gimbal orientation and yaw motor maybe calibrated int the factory? thanks
Hi, i had a crash with my p4pro and the yaw motor was completely destroyed. I bought new one and replaced it succesfuly but the camera wont face 100% in center and when i fly it there is strange wobble from left to right, its really noticeable in video. I tried different yaw motors and the problem persists, what you think could go wrong ?
Hello good video, I have a problem, in the application it sends me an overload message in the stabilizer motor and it is hot practically everything can you help me see what happens
hai brother i am jose form india i need your help .my p4p working done but gimbal motor over load problems ,flex cable is done, motor working well,up date new fireware done ,how can fix the gimbal motor over load problem post the fixed video
Hi! I have P4P and camera aint center. It looks a few degrees to the left...so thats a bit annoying when flying and it wont go straight...any suggestions? There is a warranty but i am thinking to try to repair it by my self. There where the yaw arm is attached could there be screw lose etc...because when i gently turn the gimbal (power off) to the right few times i am able to straighten it (seeing with power on) but it wont stay there...it could go back that left position in the time of one flight...so what to do?
Thanks for this, I have the same issue with mine. Is it also usual for the bent arm to cause the gimbal motors to get really warm and for it to come up with a warning saying the motors are overloaded?
I followed your video at the weekend. I noticed one mistake, at 31:45 it looks like you put the L piece back on in the wrong orientation over the ribbon cable if you compare it to just before you remove it at 7:00.
Unfortunately even after the replacement my gimbal is still having problems yawing - it's similar to before where it won't center and oscillates in the yaw direction. The yaw motor is also getting warm. I'm thinking the motor itself might be damaged. Thoughts?
excelente ! tengo una duda amigo , mi phantom 4 tuvo una caída y ahora el gimbal esta con problema , se vuelve loco y no esta en su centro , se va automáticamente a la derecha . me ayudas ?
On my Phantom 4 I am having problems when I'm flying my picture on my phone seems like it get a heat wave going through what should of what is what do you think the problem is
My phantom 4 gimbal/camera is facing slightly to the right. I tried IMU and gimbal calibration but it doesn't seem to help. The camera level and the roll and pitch is fine. It's just the yaw is always couple degrees to the right. Any idea how to fix this problem?
Your Problem sounds like its related to the damper plate located within the recess of the under belly of the drone's gimbal, it might be a little off center
Great video but the piano is depressing along with sometimes u repeat yourself 3 times or more, "we going to put cover screw on, the cover screw goes on the cover, the screw goes on the cover right here, ok? , now that we have that one screw on the cover, we got another screw that goes on cover, ok, right here is the screw for the cover , now the screw goes on cover right here, ok" unquote. " Geez Lewis I believe I got a year older and I'm a dam expert on cover screws and all screws on the p4. Gonna have nightmares on screws ok?
$28, two hours of my time, and this video saved me from buying a whole new drone. Thank you! I'm going to purchase something from your store as a thank you soon!
I just flew my Phantom 4 and the entire gimble assembly was dangling from the ribbon cable. Thanks to your video I took the P4 apart and fixed the issue. The 4 screws came loose from the dampener bracket @ 29:26.
Great Video.
Thank you so much for this video. I believe my dampening plate is bent causing my issues where camera is to the side and goes back and forth. I was able to follow your video perfectly and I even called you about this issue and you gave me direction on starting with replace dampening plate. If that doesnt work to replace the Yaw arm and then finally replace the esc chip as last option. I really appreciate your time and efforts,
At 8:40, the area you're working on, makes a weird noise, therefore my gimbal doesn't work properly. I don't get a error message but the sound is weird and it has a very smooth vibration that makes the image wooble. Now, seeing your video I'm willing to open the main logic board myself but out of your experience can you tell what the problem could be?
The video is amazing ,the soundtrack is so calming. Thank you .
I got to the final step on the removal, but 2 of the little screws were in tight I could not get them out. I guess I will have to take the heads off and hope I can get them out with small needle nose pliers, but it seems doubtful. I will also have to replace those screws and heaven knows who sells them. Great video!! Very helpful.
Where did you find this little screwdriver because I want to buy one
www.irepairmd.com/_p/prd13/4558724691/product/wow-stick-wireless-toque-screwdriver
Great video tutorial. I was able to replace my yaw motor with complete confidence.
Excellent insight to what's inside my Phantom 4 ! What powered screw driver unit are you using ? I'd suggest using a magnetic work mat to secure those runaway little screws . . . Thank you for sharing !
Great video and a big help for me. I recently crashed my P4 and it hit hard enough it dislodged one of the 4 internal dampening mounts the bracket hangs from. Just followed this video and finished putting it back together.
On thing I did notice though, was that the L shaped bracket you put back on at 31:40 is opposite of they way it was when you took it off, and opposite of the way mine was, although I'm sure it's likely okay either way..
thanks for the video ! it helped me a lot. even after replacing the arm, my gimbal still wobbles. I figured it's the bad yaw motor. Couldn't find the yaw motor with wide mounting screws layout. the yaw motor in your video is the new design. can you help me on this please ? Thanks in advance
Do you know what size the 2 screws are that attach the roll arm to the roll arm motor because i need to buy 2 as mine ripped out of the roll arm thread. Great videos by the way.
Hi, I need to buy an Yaw Arm for P4P. I've checked out ur website and could not find it.
Stoked me out with this vid! Thanks alot. Super cool mini screwdriver.
great video. looked on your website for this part but can only find it for the phantom 3, are they the same?
Did you have to recalibrate you sensors after repairing? Mine says hovering and obstacle avoidaince may fail.
Wow that a lot to do to put that new peace to go back on to make it work I hope you have sister oxidants for all that when you do this.
Hi, what is the name of the board that you removed at minute 10. I need that part but can´t figure out what is it´s name or number part to buy it. Thank you!!!!
hi I need some advice please. I recently purchased a Phantom 4.. and typical of me.. I panicked and crashed it.. no serious damage per say BUT two of the propellers have a scuff on them.. now is it safe to fly with those two scuffed propellers? or do I need to replace them? thanks awaiting your reply.
after following your guide, my camera yaw is tilted to one side. do you know of a fix. thanks!!
Thanks for the video, very helpful!
I have the same problem after a crash.
Can I send my drone to you.
If so how much is this repair including labor?
Hi Wathana, have you had problems with camera yaw position post yaw motor replacement? i.e. pointing left or right and not in center? I've heard that hey use magnetic sensors/hall effect to determine gimbal orientation and yaw motor maybe calibrated int the factory? thanks
Why is there not a video on RUclips for replacing phantom 4 gimbal ribbon?
Does the plastic yaw arm guard fit on the gimbal of a phantom 4 PRO?
Hi, i had a crash with my p4pro and the yaw motor was completely destroyed. I bought new one and replaced it succesfuly but the camera wont face 100% in center and when i fly it there is strange wobble from left to right, its really noticeable in video. I tried different yaw motors and the problem persists, what you think could go wrong ?
I mixed up two of my motors. The plastic lock hubs were broken and off. My question is there any way to energize them to determine rotation?
How much would one of those cost to have one of flying missing yours?
Hello good video, I have a problem, in the application it sends me an overload message in the stabilizer motor and it is hot practically everything can you help me see what happens
hai brother i am jose form india i need your help .my p4p working done but gimbal motor over load problems ,flex cable is done, motor working well,up date new fireware done ,how can fix the gimbal motor over load problem post the fixed video
wow...great video
you take my too much time but really useful.
I want to use your gimbal guard. do you ship Pakistan?
I think it's a problem of yaw motor not the yaw arm, you can get the arm straighten from a carpenter shop, but to fix you need to buy new yaw motor...
Can you use the same Gimbel
Is there anyway to fix it with out a new gimbel
Hi! I have P4P and camera aint center. It looks a few degrees to the left...so thats a bit annoying when flying and it wont go straight...any suggestions? There is a warranty but i am thinking to try to repair it by my self. There where the yaw arm is attached could there be screw lose etc...because when i gently turn the gimbal (power off) to the right few times i am able to straighten it (seeing with power on) but it wont stay there...it could go back that left position in the time of one flight...so what to do?
Very good! My buddy just crashed his P4 and broke the ribbon :(
Thanks for this, I have the same issue with mine. Is it also usual for the bent arm to cause the gimbal motors to get really warm and for it to come up with a warning saying the motors are overloaded?
I followed your video at the weekend. I noticed one mistake, at 31:45 it looks like you put the L piece back on in the wrong orientation over the ribbon cable if you compare it to just before you remove it at 7:00.
Unfortunately even after the replacement my gimbal is still having problems yawing - it's similar to before where it won't center and oscillates in the yaw direction. The yaw motor is also getting warm. I'm thinking the motor itself might be damaged. Thoughts?
good night, I had a problem with my drone phantom 4 could I contact you for a consultation? thank you I write from Colombia
excelente ! tengo una duda amigo , mi phantom 4 tuvo una caída y ahora el gimbal esta con problema , se vuelve loco y no esta en su centro , se va automáticamente a la derecha . me ayudas ?
Do you sell phanto 4 pro yaw arms?
On my Phantom 4 I am having problems when I'm flying my picture on my phone seems like it get a heat wave going through what should of what is what do you think the problem is
I really appreciate your video and all the effort, but the piano is so depressing.
May drone in main controller data error problm
Hello, sorry for my langage, i'm french. do you send in France?
My friend, whenever I change the Yaw engine it gets misaligned. How do I do it?
Thank you very much for this superb guide.
My phantom 4 gimbal/camera is facing slightly to the right. I tried IMU and gimbal calibration but it doesn't seem to help. The camera level and the roll and pitch is fine. It's just the yaw is always couple degrees to the right. Any idea how to fix this problem?
Your Problem sounds like its related to the damper plate located within the recess of the under belly of the drone's gimbal, it might be a little off center
I have exactly the same problem, although my gimbal is pointing slightly to the left! Can this be fixed easily?
James Lim hey did you guys find a fix for the off center camera ?
iRepairMD RUclips any tips that might help fix this problem ?
I was never able to fix it. I returned it and got a Mavic.
Hey it has not been flown more than 20 times
Thank you.
Great video but the piano is depressing along with sometimes u repeat yourself 3 times or more, "we going to put cover screw on, the cover screw goes on the cover, the screw goes on the cover right here, ok? , now that we have that one screw on the cover, we got another screw that goes on cover, ok, right here is the screw for the cover , now the screw goes on cover right here, ok" unquote. "
Geez Lewis I believe I got a year older and I'm a dam expert on cover screws and all screws on the p4. Gonna have nightmares on screws ok?
Belo Trabalho!
hello, what is the music?
Amazing!!
I fixed the camera arm with epoxy ruclips.net/video/ljt8X4ZsBnk/видео.html but I am saving this video for when I need to change it
Haha
Where did you find this little screwdriver because I want to buy one
wow...great video
you take my too much time but really useful.
I want to use your gimbal guard. do you ship Pakistan?
Yes we do