We are trying to confirm the EMC filter is off on our 38a GA500. We are having a hard time finding the screw location. Is it under the cover? The manual shows it just above the motor terminals, but there is nothing there.
Hi, Ga500 has In-built breaking transistor? Ga500 has separate breaking resistor option? Ga500 series suitable for both induction and PM (permanent magnetic motors) or only induction motors?
Yes the GA500 does have separate braking options and also can be used on Induction, Surface Permanent Magnet, Interior Permanent Magnet, Synchronous Reluctance, motor types. More information can be locate on the GA500 product page, located here: www.yaskawa.com/products/drives/industrial-ac-drives/microdrives
In some cases, single-phase input may be desired on GA500 drives. Our Yaskawa Solution Center has a document you might find helpful. solutioncenter.yaskawa.com/selfservice/viewdocument.do?noCount=true&externalId=13131&sliceId=1&isLoadPublishedVer=&docType=kc&docTypeID=DT_FREQUENTLYASKEDQUESTIONS_1&stateId=1546&cmd=displayKC&dialogID=58765&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl&openedFromSearchResults=true
Thank you for you interest in Features and Benefits of the GA500. The setting range for accel and decel is 0.00 to 600.00s. You can find more information here: www.yaskawa.com/products/drives/industrial-ac-drives/microdrives/ga500-drive
We are trying to confirm the EMC filter is off on our 38a GA500. We are having a hard time finding the screw location. Is it under the cover? The manual shows it just above the motor terminals, but there is nothing there.
Great Video! I didn't leave my PC until it was over and got some good take aways from it.
Hi,
Ga500 has In-built breaking transistor?
Ga500 has separate breaking resistor option?
Ga500 series suitable for both induction and PM (permanent magnetic motors) or only induction motors?
Yes the GA500 does have separate braking options and also can be used on Induction,
Surface Permanent Magnet,
Interior Permanent Magnet,
Synchronous Reluctance, motor types. More information can be locate on the GA500 product page, located here: www.yaskawa.com/products/drives/industrial-ac-drives/microdrives
hi anybody know how can i get 24 volts dc from the vfd yaskawa GA500 when vfd it’s in on position?
Thank you Yaskawa USA ... 👍👍
I have single phase 240. Do you have to derate the VFD for a 5hp three phase air compressor motor?
In some cases, single-phase input may be desired on GA500 drives. Our Yaskawa Solution Center has a document you might find helpful. solutioncenter.yaskawa.com/selfservice/viewdocument.do?noCount=true&externalId=13131&sliceId=1&isLoadPublishedVer=&docType=kc&docTypeID=DT_FREQUENTLYASKEDQUESTIONS_1&stateId=1546&cmd=displayKC&dialogID=58765&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl&openedFromSearchResults=true
Tem no Brasil?
Hi, acceleration time its 1sec, we cant reduce to less than 1sec, like 0.4sec like others brands vfd
Thank you for you interest in Features and Benefits of the GA500. The setting range for accel and decel is 0.00 to 600.00s. You can find more information here: www.yaskawa.com/products/drives/industrial-ac-drives/microdrives/ga500-drive
Hi sir
Vfd ga500 alarm band Kaise kare