Grid connected inverter Matlab / Grid tied inverter Matlab
HTML-код
- Опубликовано: 11 сен 2024
- Grid connected inverter design in Matlab
Grid tied inverter design in Matlab
Şebeke etkileşimli inverter tasarımı
Şebeke bağlantılı inverter tasarımı
how to synchronize pll grid to inverter in matlab
For simplicity we can use BREAKER with external control instead of Anti-Parallel connected switches: Thank you sir for your great contribution in the society
Thanks alot for these valuable videos. This is very helpful for grad students doing masters or PhD. Looking forward for other videos related to smartgrids, Wind, PV, etc.
I am glad to hear such a response. I am so much busy. When I have time I will share a new one.
Hello, thank you so much for the video but I dont understand the role of parallel connection . May you please tell me what is it?
Thanks for your great contribution
Thanks for your interest.
Its very helpful. Thank you
Hello Sir, how can I select the values of the filter inductors and capacitors? Would you kindly suggest a text or tutorial please?
sir,
i have designed a simulink model of MMC for capacitor voltage balancing . when i connect it to the grid as you uploaded, before connecting it works as natural multilevel converter, load current was same but after connecting it to grid, converter takes huge current from the grid.
what may be the possible causes for that?
thanks in advance.
Naki hocam merhaba, yine ben :D burada faz açısını kontrol ediyoruz ya bu neyin faz açısı oluyor, referans sinyalin açısı mı oluyor. Hocam bir de bu faz kayması kontrol yöntemi olarak mı geçiyor.
Merhaba Berk, evet referans sinyalin faz açısı oluyor. Burada kontrolden ziyade faz açısı ve modülasyon indeksinin etkisini göstermek istemiştim. O yüzden feedback almadan yaptım.
@@nakiguler Anladım hocam teşekkürler.
sorry, I got my mistake ,given phase shift at sine in function as wrong ,now i am getting well.....
Thanks alot sir
Ok
My grid and inverter current waveform are almost 180 shifted . What could be the issue ?
It's possible because when you transfer to power from inverter to grid, it should have a phase angle. Actually, it shows, your system transfer the current without reactive. Current direction should be opposite. It's normal.
@@nakiguler OK. Thank you
@@nakiguler Sir kindly explain little more please . I have got same issue of 180 shifted current waveform
Good day sir.
how do you generate a fault into the grid i.e distorted voltages , unbalanced loading ?
I actually done every thing of this video and try to simulate in Matlab . the only problem is that inverter current and grid current are 180 shifted , not sharing load like videos . kindly help me if there any silly mistake ? Thanks in advance
Since LCL filter is deigned & all method is clear & quick.How will be three phase bridge connected to filter?
Thanks, As soon as, I will upload a three phase grid tied inverter video.
I uploaded three phase grid tied inverter. You can find link in below.
ruclips.net/video/jI53Avs6RZ8/видео.html
Hello sir
This is really good video
Could you please make video on cell balancing of BMS in EVs
Hello, thanks for your interest. Cell balancing is a deep issue for battery management. I have no experience with cell balancing. Sorry.
by changing phase angle ,current phase is adjusting when parallel switch is zero ,but when we make parallel as 1 ,currents ig and i_inv both are looking like staircase ramp signals increasing in opposite directions continuously ,but if i put phase angle as zero, even in parallel 1 state(after conn grid) i am getting waveform magnitudes of grid load inv as you said at last in video
please help me where i made mistake sir.
Hi thank you for the video, can you please tell me what is the name of control method used in this video ?
Can you provide the mathematics for getting the values of inductors and capacitors
Sir, your videos are very helpful. Sir kindly please upload micro grid model in which battery connected to micro grid
Thanks, I will upload some videos in next month.
@@nakiguler thanks sir
Shubham Tiwari, I share a video for battery operation modes
ruclips.net/video/wSxTpqsy0Rg/видео.html
At 22:25 You wrote: igrid_max=-6A
Does it mean that the inverter is now supply 6A to the Grid?
Yes, because power direction is opposite.
@@nakiguler Thank You
Hi sir can you please explain what is step by step operation and how we get proper waveforms
Naki Bey iyi günler,projem için bu video çok önemli ve bir türlü matlab function'ın kodunu doğru yazamıyorum hata veriyor hep yardımcı olabilirseniz çok memnun olurum.Size ulaşabileceğim bir yer var mı?
İyi günler, bu videodaki kodu aşağıda bulabilirsiniz. Researchgate yada aşağıdaki resmi websitesinde yer alan mail adresinden ulaşabilirsiniz.
dialup-06.gazi.edu.tr/site/gulern/contact
function a = fcn(x,ma,shift)
shift_k=shift*pi/180;
a = (ma*(sin((x)+shift_k)));
Thanks Mate, you have showed all steps how to get to the end point. Sir, have you published this paper on any website ? If so, I would like to use it as a reference!
Hi, My 3 paper published about inverters as follows. I am writing a paper about inverters, but I did not submit yet.
1-Naki Güler, Erdal Irmak, Halil Gör, Erol Kurt (2017). "An Inverter Design for A New Permanent Magnet Synchronous Generator". International Journal of Hydrogen Energy (SCI), Volume 42, Issue 28, pp. 17713-17722, July 2017.,
2-Guler Naki, Irmak Erdal (2019). Nötr Kenetlemeli Eviriciler için Çok Giriş - Çok Çıkışlı DA-DA Çevirici Tasarımı ve Kontrolü. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 7(49-62).(Turkish)
3-Erdal Irmak, Naki Güler, 2018. Model Predictive Control of Grid-Tied Three-Level Neutral Point Clamped Inverter Integrated with a Double Layer Multi-Input Single-Output DC/DC Converter, IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering~IEEE CPE-POWERENG'2018, Doha, Qatar, 10-12 April 2018.
@@nakiguler sir are you published this paper now??
@@nakiguler I want to take reference now??
@@gudipatimaheswari6855 yes these are published.
instead DC power we can use solar energy sir???we can attain the same output ya??
kishore kumar yes you can use solar panel as an input source.
Naki GÜLER ...sir I have used but current in inverter showing around 200amps..I don't no why???I have changed the input values of PV panel,even though I am getting 200amps...very confusion... Please help me regarding this sir...my mail id: kishore8192@ gmail.com
Why use a Matlab function and not a current controller?
Hello.. Why you put bridgr thyristors?
Nice work :) ...... can you please suggest some papers regarding your simulation?
You can find more paper for grid connected inverter model. My conference paper will be published in next month. You can find paper name and other details in my official web site. www.websitem.gazi.edu.tr/site/gulern/academic
the inverter that connected to the grid is single phase only right? how to connect three phase inverter with grid?
As soon as, I will upload a three phase grid tied inverter video.
ohh thank you so much . i really excited to learn that sir
Sir I need ur help to design wind turbine emulator for a microgrid simulink
Hi ! I dont get the expected results when the parallel connection is enabled.The grid current and the inveter current at an instant adds upto zero.What might the reason be ? ..Thank you.
Hi. You should check somethings between grid and inverter output waveform. Especially three parameter important, phase angle should be equal, inverter and grid voltages should be equal and phase - neutral connections should be checked.
Naki GÜLER thank you
I have same problem . Kindly explain how you solve this problem ?
Sir how can control active power by controlling phase shift angle
Sir, after setting phase shift 2 when I close or set 1 to parrele swich than I am not getting Igrid and Iref waveform as its your ......however before this operation everything is as you are getting? what could be the possible reasons?. and what is to be set sample time at scope: -1 is by default I am using Matlab2018a
If you select the phase shift as 2, the inverter voltage may not synchronize to the grid. Please check the Matlab function block codes. Did you convert degree to rad/s? If you select the sampling time as "-1", it will be equal to the base sampling time of simulation.
@@nakiguler Thank you sir, identified and fixed the issue. However, for synchronisation it is necessary to have same phase of Vgrid,Vinv ,Iinv and Igrid ???
Hi! thank u so much for the video Dr. Guler, how would simulation an single-phase inverter off-grid?
Hi, please check my videos. I explained for three-phase inverter. You may convert it to single phase.
sir any material is available to find how current varies with phase and current sharing between grid and inverter
I don't share any material but, You can seen in the video (at 20:20), relationship between phase angle, modulation index and power.
Sir, is there DC parameters to monitoring?
What do you mean with DC parameters? Current and voltage? You may see all the parameters with scope.
Sir i want to contact you directly.
Want to ask something and need explanation for those things. Would appreciate it.
This my official website, you can find my email here: dialup-06.gazi.edu.tr/site/gulern/posts/view/id/139133
or you may contact on Researchgate.
sir do u know how to design grid connected inverter using proportional resonant as feedback?
+norAlone, I don’t know.
okay thanks
sir, can u provide control strategy for single phase grid connected inverter
Inverter type not important for main Power control structure. Only number of switch is changing and You should design your control strategy for phase shift and modulation index control.
does this utilize, a boost converter and then half bridge rectification ?
andrew greene, it is a single-phase grid-connected inverter. Thyristors are used as grid connection breakers.
@@nakiguler can you assist with the design of dc boost converter and single phase inverter together in closed loop
andrew greene, you may find boost converter and inverter examples in my videos. I shared some control parts for inverters. You can adapt it to your model. If you have a problem, please let me know.
@@nakiguler Hey thanks a lot. I am trying to combine the two >.>
Ok 👍
Sir can you share a schematic diagram for this
Is it closed loop??
No, I just show power transfer.
@@nakiguler is it Spwm??
there is some problem in PLL when i click on run errors: Output port 1 of 'grid_example/PLL' is not connected. and second one is in matlab function :
function a = fcn(x,ma,shift)
%#codegen
shift k =shift*pi/180 ; %convert degree to rad
a=(ma*sin((x)+shift(k))); %refrence voltage
Regarding the matlab function , scpit file path and your simulink model should be on the same path .
yes..same.. iam getting error..how can i clear it??
@@gudipatimaheswari6855 basil mathew replyed on this ..you can try that way. I have not used after that so dont know exact solution
Inverter voltage not coming ? Please tell me the problem
check to the gate signals, input dc voltage and wt signal.
how did you copy a ''from port'' out of a ''goto port'' @2:10
When mouse position is near the from or goto block, you will see a blue highlight. If you click when see this, it will automatically create from or goto.
Matlab file send chai sir
This matlab code is not working
Can u send code malothuramesh17@gmail.com
What is the problem?
@@nakiguler The output of PLL is not connected
15-6=10 :|
Yes, the current bigger than 15A 👍