How to repair DSLR Nikon D80 - aperture problem (Err message)
HTML-код
- Опубликовано: 18 ноя 2017
- In this video you can see How to repair DSLR Nikon D80 - aperture problem (Err message).
- Click (Show More)
Thanks for the support and thanks for watching this video!
Lenght: Long (16+ Minutes)
- Site : www.digi-service.eu
- Social Medias:
» Facebook: / digiservicebg
» Instagram: / digiservice
» Twitter: / digiservicebg
#Nikon #D80Repair #Camera
I was given one that’s actually retired news reporter equipment with this issue. Thank you this guide will be helpful for repairing mine!
I started sweating, just watching
Bravo! You make it look interesting. I'm sure my D80 suffers with the same problem. I used to work on jet engines but not sure I'd want to tackle this without having some knowledge about the part I'm replacing.
Hello , thank you for the comment :) It is easy if you follow the video, but you are right - without knowledge will be tricky ;) Don't forget to share and subscribe to our channel ;)
Thank You for sharing your video. It’s a grea tip.
I’m having the exact same error on my Nikon D80 camera body.
Thank you :)
Thanks so much for your video, the solution is easy and clear.
Joe Black thank you :) Hit LIKE if you like the video and subscribe for more videos ;)
DIGI SERVICE I did !
Hi great video. I have just carried out this repair and am putting the camera back together. At 12:00 there is a small board that dangles when it is unclipped from the board below and is held by a single small grey wire. My grey wire has detached itself. The connection is still soldered onto the board but I am unsure where it connects to on the main camera body. Hope you can help. Thanks
Thank you very much. repaired aperture problem my d80
Thanks for tips of how to go through the challenge of disassembling the Nikon maze, but the critical detail is missing. What exactly do you do with the round white piece that is apparently at fault at 10:55? You move the contacts up and down with the tweezers so as to bend them upwards? Is the fault in bad contacts? dust? entangled contacts? The vid is old, but I'm counting on your professional memory... Thank you in advance!
This guy shows ALL steps
ruclips.net/video/6XZJEO4FgYQ/видео.html&ab_channel=GHCCRtube
que buen video.... yo tengo una Nikon D80 y tiene ese error, pero no me atrevo a destaparla.
Hola Carlos :) No tengas miedo :) Sigue hasta al final :) No olvides registrarte y compartir nuestro canal :)
I can honestly say....I would NEVER attempt this! There's a reason why camera repair companies exist....OMG!
En cuanto está valorada una reparación de estas a la cámara D80.....
Great video, But where can i get part for this brush to replace?
One would have a great collection of miniature screws
and plenty of spare parts for the NEXT camera repair attempt
Hi, what seems o be the problem when the aperture lever is at the "down" position? This makes my d300s viewfinder dark. But if i use manual mode even if the viewfinder is very dark, the pictures are exposed correctly. The lever should be in the "up" position when I checked my d700.
First of all, very nice video! I'd like to ask you how you protect the sensor from dust during the "operation"?
Hello thank you for the comment:) no matter what we do, before install the CMOS sensor, we make basic cleaning. :) This opreration is not included in this video, beuse sometimes take more than 15 min and will extend the video.
Regards.
... and don't forget to subscribe and share our channel ;)
type into search engine - One fix for the dreaded Nikon "Shutter Error". Worked with some light oil and lithium grease (it is non conductive). How sweet that shutter is now! Yes it might be chancy but I bought it cheap and it was either dump it or do something with it.
Good evening I wanted to ask you if you could show me an internet shop that sells spare parts to fix nikon machines
with the various catalogs of parts to be replaced
Thanks so much
Send email to service@digi-service.eu with your questions and attached pictures and we will help you!
And how to diagnose to be sure 100% this is a problem?.... before you start unscrewing every single microscopic screw.
Almost 100% that comes from the only one problem of a plastique gear.
Hi, thank's for the video. I fixed my D80 and now it works just fine! The only problem is that the flash pops up but doesn't work. Could you guess maybe the reason...?
Hi, i really glad that my video helped you. About the flash - if the flex and other wires are ok(put in place and no cracks) you should serch the problem in the flash PCB. There is two options - defective PCB because of discharge of the capacitor while you dissasemble the camera and the second option is broken micro switch in the flash mechanism (in the Top Cover). Don't forget to subscribe to our channel ;)
If you need the flash for cls, then fix it. Otherwise it might be a good idea just to get an off shoe speedlite, like a yong nuo 560 III
Hello alex.
Was it hard to repair it? I have the same problem too with a d80 that a friend gave me
Dear George,
sorry for taking me so long to answer. You have to follow the above video step by step, but the most important is to remember where each of your screws came from. I used a cardboard and wrote down for each screw the moment I took it off the camera. If you do it later, probably you are going to forget it.
Hey awesome video! Did you cut the black cord at the bottom? Is it important to resolder it or it can be disconnected as it is?
I got lost in the part that was skipped. Lol
Jay-Ar Deganos, it was desoldered :)
Oh okay thanks! Yeah my camera was functioning well but after I converted to ir it started to show err. From my research everything is pointing at aperture which is weird because I didn't touch the aperture I only open the back.
Hi DIGI SERVICE, is there a simpler, faster access through the front of the camera with less disassembly? Thanks!
Hello Juan! There is no other way!
Thank you for your prompt answer.
..also thank you for subscribe our channel :)
DIGI SERVICE Thank you! your video helped me save my camera. Funny thing, when I got to the part it wasn't actually broken as expected but unbalanced and dirty. Everything's working as it should now. Thanks!
Juan Paz Viera Thank you:) don’t forget to subscribe and share our channel;)
Thank you very much for this video! Very clear what is the issue and how to solve it. However, that didn't go to plan... I managed to re-assemble the camera, the top display wasn't showing any information. However, the rear display functioned and with the camera in manual I could trigger the shutter and it recorded an image to the SD-card. So at least I knew the problem was solved thanks to your video. However, I opened the camera again to check and re-connect the flat cable going to the top cover. Checked the other flat cables, now the camera is dead and makes a small clicking noice as soon as I put the battery in place. The 2 displays seem dead and the camera doesn't respond. Only when I put an SD-card in the green LED on the back start flickering slowly. Does somebody have an idea what could be going on in my D80?
Hi hard to predict where is the problem .
Someone
NOT Somebody
A Body is a DEAD entity.
Ask yourself this simple question
How many of YOU are there in this world.
Learn that One is the Cardinal number
One is unique
One is irreplaceable
One is alive
One Soul
It is not difficult when you have a proper understanding of the English language
** Undertake an extensive reading program to better educate yourself
and study books on the subject of Law and Latin
You can do it.
Good bye and good luck.
Ignore-ance is not desirable
That was a LOOONNNGGGGG way to go to show a part and nothing more.
I started watching then skipped, then said 'NOPE not today, not tomorrow'. Respect, but I won't take the risk lol
Does the brush break often? I was under the impression that the plastic nubs holding the disc break apart and they should be replaced with a steel set screw,
Hello, no , in my 12 years experience this is the only problem with D80 :) If you can repair it, this will be the last problem ;)
To be specific, what is the usual problem, the brushes or those little plastic "rivets"?
To get to the aperture control unit, desoldering is required? I might have missed it.
Yes, this is short version :) Desolder 4 wires on the top side of lower board.
Great video, thank you.
I managed to disassemble the whole thing to get into the aperture control unit, and then reassemble the camera back!
Now I don’t get the error message I got before and the mechanism seems to work fine, BUT when I shoot, I only see a full white (or pale pink) image.
Does anybody has a clue where can be the failure?
Thank you!
Hello, thank you for the comment :) Check the harnes cable between MAIN PCB and SENSOR ;)
Thank you, I'll check and I'll tell you about.
Did it work?
asuhdiahwidaw I couldn't try it yet! I need to find the enough time to disassemble it again.
@@Skweez did it work?
A minha está com esse mesmo defeito.. será este o problema mesmo?
Si
Thanks for the detailed video :)
I fixed the aperture, now the camera "clicks" every time i press the trigger, but i still get an error message and no photo is saved. Any idea what could be the cause?
Dennis hi thank you for the comment. Check all the cables and connects.. this is unusual symptom.. may be some flex are not in place or may be the brush in the aperture module is not positioned correctly :)
@@DIGISERVICEBG thanks for the quick reply. Well the brush was hold on by the second rivit and i made sure to check every connector and align the excisting sharpie marks on them. Does the aperture wheel need to be in the excact same position it was in while disassembling it? Mine jumped out :/
Would be a shame to throw away a otherwise perfectely good camera
Dennis hi , yes should be in the same position. If you need manual, send email to service@digi-service.eu. Thank you!
Hi. Does DSLR camera have any power sugre protection inside the body? I am just curious. For example, let's say I bought a new lens to my DSLR, but with damaged electronics. I put it to the body and .... the camera is damaged. It is possible?
Hide Mac hi, this will be the first case like this:) yes, in the power supply there is a couple fuses . Check them but this is really unbelievable that the lens will damage the camera!
@@DIGISERVICEBG thx
Wow, would not trust myself to reassemble!!
My d90 started doing this sometimes then today I got the flashing f - - and it won’t go away - worth the repair ?
Hi Ted! Yes, you can try tis tutorial and for sure will repair it :) Even if you need to exchange the aperture module, it is not too expensive. All my best, Petar!
👍🏻👍🏻👍🏻
afteer disassembling it, fixing the problem and reassembling, then take the camera and carefully put it in the nearest dumpster.
Hello, jesuisravi :) If this happened to your camera, I'm sorry. But such repairs are 99% successful and video shows that. Thank you for your comment!
@@jcibolo6265 Just 1 ??
saludos, fijate que desarme la camara al pie de la letra ahora que la arme me sobraron 42 tormnillitos 😅 y como 6 piecitas que no se que son 😂😂😂🤭 pero gracias por ayudarme a desarmarla jajajajajajaj buen video bro pero no me anime a desarmarla mejor te la llevo y crucificame con el precio jajajajajajjaja
I am seriously impressed … 😮 … you deserve a full expenses paid vacation to anywhere you choose … OMG, this is an amazing video of an amazing repair … I bow down to you SIR 🙏🏻👍🏻👍🏻
How I can fix the brush?
I don’t know you can tell me or not?
You need to use your skills :) Better send the camera to us :) Thank you!
Hi, after watching your video I'm wondering what the part name is called, I'm trying to save my dad D80, been serving for good years and we don't really have the money to afford a new camera. Thanks in advance
Hello, thank you for the comment :) Just glue it the loose brush(in the video) and install it back in position :)
The actual part after all the BS unscrewing footage is at 10:40. But he doesn't say exactly how to "repair" the "Brush". He just shows him niggling with it with a pair tweezers, then fast forwarding to putting it back together at 10:59. Worthless video, because anyone can unscrew and take apart a camera.
Hello and thank you for the comment :) If you do not know what's happening on the video and whether to fix a loose brush or change it to a new one, you should not comment on this video even if you say "Everyone can dismantle a camera" :)
With all due respect, but what is not clear to comment on "Worthless video, because anyone can unscrew and take apart a camera." A loose brush, seen in a video that does not provide a good contact, and the camera shows a error. An text comes out and informs you that the part can be replaced or corrected ... Once again - if you are not aware of what you should do, you should not comment that the video is worthless. You probably do not know how much labor and effort is needed to get what you see. Still thank you for your time :)
@@DIGISERVICEBG I think Tim`s point is that the video should be called something like " camera disassembling" as the actual apperture brush repair is not really discussed in the video. Adding plain text "repair or replace" is not what the viewers are likely expectting to learn from this video :-)
I appreciate making a video is not easy task, but at the same time the viewers spand lot of time watching it, dismantling their gear and potentially ending up in troubles as there are missing steps such as the soldering and actual "brush repair".
Considering the potential time effort and unclarities in the video it makes me thinking it is more sensible giving the camera to the professional repair shop.
Hello, sorry for the inconvenience. I have a Nikkon d90 that had a similar problem. They repaired the mirror mechanism. Now it works fine when it is in manual and video, but when it is in full automatic the photos come out dark
NIKON not Nikkon
Learn to pay attention to detail.
Stay with peeling potatoes
That does not require much thinking
Wow! the spelling police is so triggered! Peel the potatoes yourself. Btw only mentally abnormal people use panda as profile image.
yo no me animaría a desarmar una cámara
Good stuff but what happens at 9:06?!
Remove the mirror box as is the video :)
Thanks, great, but much too inctricate and complicated. Something is bound to go wrong.
what is the name of this part that needs to be changed?
Hi Diaphragm block control
what brush? You didn't even show yourself replacing it? How is this helpful?
Hello, thank you for the comment :) This video is only to show and give you solution... :)
@@DIGISERVICEBG Then your video failed, because the solution is the REPAIR, and you didn’t show that. You also refuse to acknowledge or take responsibility for titling this a repair video, without the repair. When you learn to respect your viewers, and listen to their feedback, I’ll consider Liking or subscribing. Try to do better next time and choose honest titles for your videos.
PS. It is an excellent DISASSEMBLY video... you probably should have called it that!!
Hi, u there? I'm having a "error, press the shutter button again" message on my camera. Sensor cover, mirror n aperture lever all r working abnormally. Any idea what happen with my camera?
*all of those I mentioned above didn't stucked either.
Hi this problem is like in the video :)
@@DIGISERVICEBG so, what do i have to repair? Motor? How much will it cost to replace it?
@@bonchengj_sangma8413 follow the video
Same ERR message on my 7DMK II . is it the same fix?
Hi , no the 7D is different. Send the camera to us and we will repair it :).
My d7100 is giving me Err every time if i try to change aperture and take picture. It's always smallest aperture no matter how i adjust it.. lever is not stuck and it does adjust it but always smallest setting (all the way down).
Whats the problem? Aperture motor?
Hi, yes the problem is in the aperture.
So what happened between 9:05 and 9:06? The video skipped at a critical time.
Hi JonMichael001, thank you for the comment :) The skiped part is not critical :) After removing the screws holding mirror box , you should remove it. That's it :)
What would the cost be for this repair ?
Hi George! The estimation for repair will be 70 euro. For more information , please, write us on service@digi-service.eu. Thank you! Don't forget to LIKE this video and subscribe to our channel ;)
Got my ass shocked 3 times. After the 3rd time I gave up on it. Will just buy a used body. You can find them for under $100
did you take le battery out?
did you take le battery out?
After you take the battery out just wait a day before you start . It will allow time for the capacitor to drain
And how much is the cost of the reparation?
Hi, around 80 EUR.
How to fix Nikon camera cap/cover got stuck....plz make a video
Hello, thank you for your comment. Is this video is helpful for you or not?
Rubber bands, and make sure you stick it back on correctly this time.
I have to do this to my D80 only 3600 clicks and I get this error after not using the camera for five years lol.
Now you see why cameras that cost under $1000 when out of warranty are absolutely NOT worth repairing. This would cost at least $350 from a Nikon repair centre. A working D80 can probably be bought used for under $100 now on Ebay.
Hi, for this camera model you can pay under 100USD but you still don't know the condition. So better repair your old camera - knowing that is not damaged by hit or water leak... and will be challenge to do it by yourself :)
Yes, my D80 had the same problem. I bought D7000
Sir aap apna no denge aapse baat krni hai
ese es el error que tira mi D-80 ------ :(
Carlos, sige el video y puedes reparar tu camera ;)
@@DIGISERVICEBG gracias voy a intentarlo.....
@@DIGISERVICEBG haber cuantos tornillos me sobran al terminarla... jajajaj
Anybody want to buy a slightly used nikon d80 camera? Has 1 error on it and will include video for the repair.
After fixing this particular error , my d80 started to do black photos. SD card also shows black screen on the computer. What can be the problem?
Hello, check the flex from CCD to Main PCB, also check the aperture function is working properly(diaphragm lever is moving and shutter as well.)
Repair the charger
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How to do 5:15
Hello Noet :) What you don't understand ?
DIGI SERVICE nothing, I already fixed it thanks for responding
I'm so happy if this video was helpful for you . All my best!
Really ????????
Another silent movie ;-(
notsogreat123 hi and thank you for the comment . These videos are just only to guide and to give some info where is the problem and how to resolve it. Sorry but nothing in this world is free :)
buy a replacement for the D80 for $50.00
If you buy the spare part, its value is very close to the price of the entire second-hand camera. The purpose of this video is to show that there is a way to rebuild the operation of this camera without buying spare parts :) If you are aware of the workings and functions of a device, you do not have to watch a video in order to learn it repairing. My video is meant to get the attention of everyone interested in the problem of a camera. If someone has enough experience and knowledge ... even before 10:40, he has already figured out where the problem is and what needs to be done.
That’s definitely a good option for a lot of people who aren’t technically savvy, or don’t have time for repair... esp since as poster says, the replacement part is nearly as expensive as another camera. Of course buying used there’s no guarantee the the replacement camera won’t develop the same problem you were trying to avoid fixing 😁 ... or not.
bookguitarguy hi yes I share the same idea. :)
@@DIGISERVICEBG I missed the actual repair? I see the brush plate was lose with the missing plastic rivet head. Did you melt plastic on it to hold it in place? My camera is not moving the mirror. Motor spins but mirror only moves a little, all the way or not at all?
@@bookguitarguy Guys, some of us love to fix stuff so that we can keep them for years and years - not to save money or time- just ot be able to tell our children "this camera is 80 years old".
This should say for ADVANCED camera repair! There’s no way a just anyone can do this!!
Hi yes , everyone with skills can do this :)
If it takes this much work I’ll just toss the pos. And I only made it to the 30 second make