Thank you. So much. I love work on cars. And share my passion with everyone. Thats make everything easy for me. 😃. Remember if you got any question. About anything that use ➡️ fuel or 12volts. 😅. Leave here. I will do my best to help.
@@rodneyjohnson5946 Bring it up. All the way. Start with the mount diff. But don’t tight the bolts. Just. A couple of turns. Just to hold. It on. The. Bring the axles. To the diff and do the same thing. Put the bolts. Back. On but. Not. All the way. Then. Bring the other axle. And do the same thing. Now bring the drive shaft. And do the same. Thing. A couple of turns on the bolts. This way. You do t have to be. Pulling. To alignment any bolt. Now. You really to tight everything. 😃💪💪
Fantastic video my man . I have a couple of questions : Does the CTS 2.0 differentials have a longer life than the V-6 before breakdown ? Around how many miles do these Differentials last before they break ? Thanks for trying to help people save their hard earned cash
Well this car. Its. 100.xxx miles. And. If i not wrong. There is like 2 or 3 different type of diff for this cars. Only thing they need. Is. Do maintenance. At least you very 30xxx miles.
Yes to remove. Will be the same. Just make sure. Get the number on the little plate. That. Number. Give you you gear ratio. Make sure you get the same. One.
Where is the plate number? Is it on the differential? @@1WayfixI see the number on ur car is near the top mount bolt. Would that be the same number im looking for?
Sir. Doing a 3.45 diff replace in a 2014 cts 2.0 rear drive. Ready to install replacement. On install mount diff first to frame then attach wheel axles in any particular order? Or attach wheel axles to diff then attach to car. Thank you for your help.
Bring it up. All the way. Start with the mount diff. But don’t tight the bolts. Just. A couple of turns. Just to hold. It on. The. Bring the axles. To the diff and do the same thing. Put the bolts. Back. On but. Not. All the way. Then. Bring the other axle. And do the same thing. Now bring the drive shaft. And do the same. Thing. A couple of turns on the bolts. This way. You do t have to be. Pulling. To alignment any bolt. Now. You really to tight everything. 😃💪💪
No. I dont. There is no parts. Online. Or. At the dealer. And. To get it. At the junk yard. You have to match the. Right number. To. Work right on you cad.
My sd car. Its bad. I not sure if ican get the videos back. So i can upload. But if not. And if you got any question leave here. I will do my best. To help you. Thank you.
Not really. Just. Lift the rear. On the cv axles. Just remove the bolts. And push them to the side. Any question leave. I will do my best to help 😀💪💪💪💪
Dude did a good job an this one!! Very thorough instructions to get the job done rite the first time.
Thank you. Any question leave here. I wil do my best. To help 😀😀
Amazing video! You helped me and Dad so much!
Thank you. I appreciate Any question leave here. I will do my best to help 😀
That was a great video you could be a teacher. Good camera work I can see it is not a easy job
But with your video I can do it Thank so much . 🙏🏻👍🏻
Thank you. So much. I love work on cars. And share my passion with everyone. Thats make everything easy for me. 😃. Remember if you got any question. About anything that use ➡️ fuel or 12volts. 😅. Leave here. I will do my best to help.
I have a 2014 that's need a rear differential replacement. The is part is about 2000 yikes 😬. I need you to put in on for me
I pay 2200. At the dealer. For the new diff. If you not for. Away. I can do it. For you. Where you located?
Hello great video, Is it hard to remove the flange I am buying a rebuild but does not come with flages. Thank You
Thank u. Sometimes i use steering pulley. Tool. To get the flange put. U can try that. Should works ⬅️⬅️⬅️😃
Good job my brother. On point in every way and it's surely a blessing
Thank u. I do my best. Any question leave here. Thank u. 😀😀😀
Great job. Thanks for sharing the video.
Thanks for watching!
Very impressed ! Not the easiest of jobs. Well done and thank you 👍
Thank you. If you got any question about. Anything that use fuel. leave here i will do my best to. Help. 😀😀😀😀😃
How he do a good job when he never showed it going back in plzz tell me that
@@rodneyjohnson5946 Bring it up. All the way. Start with the mount diff. But don’t tight the bolts. Just. A couple of turns. Just to hold. It on. The. Bring the axles. To the diff and do the same thing. Put the bolts. Back. On but. Not. All the way. Then. Bring the other axle. And do the same thing. Now bring the drive shaft. And do the same. Thing. A couple of turns on the bolts. This way. You do t have to be. Pulling. To alignment any bolt. Now. You really to tight everything. 😃💪💪
The service manual says to remove the exhaust first. That would make it easier
U dont need to remove the exhaust manifold if. You watch the video
Fantastic video my man . I have a couple of questions : Does the CTS 2.0 differentials have a longer life than the V-6 before breakdown ? Around how many miles do these Differentials last before they break ? Thanks for trying to help people save their hard earned cash
Well this car. Its. 100.xxx miles. And. If i not wrong. There is like 2 or 3 different type of diff for this cars. Only thing they need. Is. Do maintenance. At least you very 30xxx miles.
Did the car have to be on remove the cv axels?
No. Just remove the bolts The ones. On the side of the diff. Then push the axle to the side
Check this part of the video 5:52
And this 7:02
@@1Wayfix did you have to hold the axles while unscrewing them?
@@WeTtEr1227 no just loos the bolts. Dont take the bolts out. You can leave there. Hanging in the axle. Then push the axle. To the side
What year is this cts
2013.
Is it the same for a 2016 Cadillac CTS 2.0?
Yes to remove. Will be the same. Just make sure. Get the number on the little plate. That. Number. Give you you gear ratio. Make sure you get the same. One.
Where is the plate number? Is it on the differential? @@1WayfixI see the number on ur car is near the top mount bolt. Would that be the same number im looking for?
Very helpful video. Thanks
@@dadirtydawg7789 i glad. This video help you. 😃😃🙏
Sir. Doing a 3.45 diff replace in a 2014 cts 2.0 rear drive. Ready to install replacement. On install mount diff first to frame then attach wheel axles in any particular order? Or attach wheel axles to diff then attach to car. Thank you for your help.
Bring it up. All the way. Start with the mount diff. But don’t tight the bolts. Just. A couple of turns. Just to hold. It on. The. Bring the axles. To the diff and do the same thing. Put the bolts. Back. On but. Not. All the way. Then. Bring the other axle. And do the same thing. Now bring the drive shaft. And do the same. Thing. A couple of turns on the bolts. This way. You do t have to be. Pulling. To alignment any bolt. Now. You really to tight everything. 😃💪💪
Once Again, Thank You.
@@JosephAlbanese-y4b any time. 😃
Did you repair the old differential after removing it?
No. I dont. There is no parts. Online. Or. At the dealer. And. To get it. At the junk yard. You have to match the. Right number. To. Work right on you cad.
I bought it new. At the dealer. 2200. I think.
What kind of model is this Cadillac?
2015 cadilla cts.
Thanks!
Thank u. Any question leave here I will do my best to help 😀
Now where is the install video?
My sd car. Its bad. I not sure if ican get the videos back. So i can upload. But if not. And if you got any question leave here. I will do my best. To help you. Thank you.
Do you have to do anything to the rear suspension before u start on the differential
Is that a yes or no
Not really. Just. Lift the rear.
On the cv axles. Just remove the bolts. And push them to the side. Any question leave. I will do my best to help 😀💪💪💪💪
@@1Wayfix ok cool
Yea it’s was a couple hour fix no need to do anything else but drop the old ok n put the new one in. Easy like Sunday morning
@@joshuawhitfield7183 happy to hear. It. Any question leave here. I will do my best to help 😀😀
Thanks!
Tha k you Any question leave here I will do my best to help. 😀