Automatic Transmission Valve Body removal - 4L60E Shift Kit
HTML-код
- Опубликовано: 15 янв 2025
- Click here to purchase the GM 4L60E DVD store.boxwrench...
GM 4L60E Transmission Rebuild DVD: Valve Body - Removal
The first step to installing a Automatic Transmission Shift Kit is to remove the transmission pan and Valve Body that is located inside the pan.
BoxWrench.net is a community and resource designed for automotive enthusiasts.
Get the full DVD with all of the sections here...
store.boxwrench...
Get our full "Basic Engine Building" DVD with all of the interactive menus, Tools section and engine Glossary terms here...
store.boxwrench...
Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here...
store.boxwrench...
New Transmission DVDs and a Differential Rebuilding DVD just added.
www.boxwrench.net - Educating the Automotive Enthusiast!
BoxWrench on Facebook:
/ boxwrench
Thank you for a straightforward brief comprehensive video. so many people will spend half the video talking about what thief neighbors dog did last year when it was raining. Yours was perfect.
I just found this marvelous site about trans rebuilding. I congratulate Mr Boxwrench for these great videos unvealing secrets and mastering about automatic trans repairs. I hope you continue providing these line of contribuition to many entusiastic followers. For me the narration and close-up pointing easy to learn.
My fiance thanks you for the ideas. He didn't have a 1 5/16 socket so he used an Equate Ibuprofen bottle and it worked great. Thanks for the tip.
This guy saved my ass, I would BUY a video this good.
These videos are priceless.👍🏻
thanks to u, I'm really starting to think that I could do this by myself,
great vid, thanks
This is the best transmission video I've seen. I especially like how you point to the item you're talking about and, then, to the bolts or retainers. That is perfect instruction. Have you seen a good one for the Lexus GX470 (it's got a U140e transmission)?
yea,I have to agree. I would never think of tackling this job before but this guy goes through it very well.
where is the next parts to this vid?
que bien gracias me sirvio de mucho. esta muy bien explicado felicidades.....MAESTRO...
great video... hydraulic, and basic mech skills, with common sense and patience, u can rebuild this transmission.... great vid
I've got the P1870 SES code on a 1999 S-10 4.3 V6. A common fix they say is to replace the valve body. Transmission works fine when cold. After 40min of driving slips in idle at a stop, then shifts hard 1-2. Looking at replacing the valve body, hope it takes care of it. 150K miles.
amazing tutorial :) i will buy your dvd soon! -question, is the knowhow in the dvd applicable to japanese/korean import automatik cars engines?
I bought this 4L60e rebuild vid and used it extensively in my 4L60e Driveway Repair vid. I will submit my vid so it can be seen here and hopefully you will send this vid to mine so we can interlink them. I have had numerous inqriries on where to buy the vid promoted here. That way viewers can come directly here from my watch page.
@thewhiskey2strokeUSA
yes this is a normal problem with these transmissions, it either has something to do with a faulty shifter solenoid, , or that your clutches arent grabbing and relasing all the way, so the tranny is still engaged while it is shifting, talk to gm asap thought as it still might be covered under warranty
I just been looking at your website the dvd deals look pretty good i will have to get some soon cheers.
Hello, I really like your video. I have a question. Couldn't you remove the force motor instead of removing the valve body? Also is there anything special needed to replace the force motor? This spring I will be getting my K1500 blazer back on the road and I was getting a code for the tcc and solenoid B when I hooked my scanner to it. I want to replace all the force motor, solenoids and harness. The trans was rebuilt but the mechanic told me he didnt replace the solenoids and harness. Thanks Ken
Amazing Video!
if you want to swap a 4L60E for another 4L60E you should be fine with any Chevy block bolt pattern 4L60E transmission.
However, if the new trans came out of a 4x4 that had a transfer case bolted to the transmission, you may be missing a tailshaft.
Occasionally, there are different length tailshafts between various models as well. But the main casing of the transmission should be the same.
great videos,
i have 1992 crown vic with AOD and i need a video about rebuilding it my self please
thanks again
Just wondering if you have any experience or advice on this problem. Where is the 3-2 downshift solenoid located on this video? Thanks so much in advance!!
Hi really good video, to doing this job thr transmission needs to be removed? Thanks 2000 yukon 4l60e..
thank you boxwrench, unusually good!
This is the way to do it if you don't need to replace or repair the valve body. I replaced the wiring harness and both A and B shift solenoids and my truck is now shifting properly.
are you guys going to upload a sample from the Differential DVD !
Nice job amigo
Can the valve body of a 4l60e be removed and replaced while the box is in the car cheers.
what causes it to shift ruff out of 1st to 2nd mine did that on my 1997z71 eventually damaging the planetary's pitting and chipping the gears it now has a fresh brand new transmission and it tends to not down shift some times at 75mph i have to manual drop it down to pass people and every now and then it will down shift ruff when i floor it at 45-50mph causing a loud bang in the rear end and drive line
I have a 1998 3/4 ton Chevy G2500 Cargo Van. Im pretty sure it has the 4L60E tranny. The transmission shifts fine until it warms up to running temperature, then suddenly it gets stuck in 3rd gear. If I turn off the ignition, wait about 10 seconds, then restart. It will take off in 1st, but once it shifts to third it stays there. I've been told its either the 3-2 shift solenoid or the ignition switch....... message continued....
Hi, Do I really need to drop whole transmission in order to disconect that large electrical connector (showed in a begining of this video)
Do I really need drop valve body in order pull that big conector, I just need to instal new "Solenoid master kit" with all electric harness.Thanks
@DALE97DSM there's free parking for all vehicles that have the A604 over the edge of any near by cliff or steep overhang :P
Good teacher, very nice presentation. Thank you.
I Have A 2004 Chevrolet : Silverado 2500 With a 4L80E Transmission When driving normally, at highway speeds I let off the accelerator pedal, the engine rpm drops down to idle rather than staying with the speed of the truck--the motor is freewheeling inside a transmission that acted more like an overrunning clutch than a applied drive clutch . In another wording, the engine was providing no drag deceleration freewheeling. What would be the fix for this Thank You Les Swift
Hi, I have a question..
I have a 01' Saturn SL2 and when the gears shift the car feels like its kicking, sometimes stronger than other times. I have to let go of gas in order for the gears to shift to produce the least amount of "kicking". Will a replacement of the valve body fix this problem? Thank You
well ive been offered a variety of 4L60E's from different year vehicles ie trucks with alos 2 wheel RWD vehicles.. but im afraid that it wont match up or the computer (electronic ) portion will not function correctly.. i have been told that tail shaft can be swapped with now issue... i was just curious of you knew what year make and models i can use on my 94 z28 LT1 automatic.?
hi, do you have anything about TH 400?.They look quite similar ti this one except for the electrics.
Ótimo video... (great video)
Crap! The connector o-ring is leaking on my 4l60e and I was hoping i could just pop it out and put a new ring on it. Looks like I gotta pull the valvebody.
hi i have a 94 camaro z28 with a LT1 engine.. my transmission is a 4L60E automatic what other year 4L60E automatic transmissions can i use? and it be a direct fitment with no issues.. ?
I don't have much power on reverse. is there a way to fix or flush before I spend any more money on rebuild or replace?
got a question! ive got a 5.3 chevy and 4l60 trann in my 1979 fj40.. just got a chip tuner thing an i need to select gearing. choices are "stock", 3.42, 3.73, 4.10, 4.56, or 4.88. any idea what i should choose?
Can this be done while transmission still in car?
@47redneck47 the same EXACT thing happened to me today.. what was wrong with yours? I've read about 100 reports of the same thing online :/
É uma pena que eu não falo nem entendo o ingles pois os videos aqui postado são exelentes sou do Brasil Rio de Janeiro .
thanks sir that is very imported video for machanics
I was wondering if my C230 is accelerating sometimes slower than usual if it could be the transmission?
The only thing I understood was the removal of the pan. After that? Haha....... ha.. ha.... =D Nah.. I'm sure I'll learn with time and effort. I have a spare TH350 I would like to try a rebuild on. Thanks for the videos!
i have a mazda mpv 2003, the gear had been jerking at 2RPM since purchase as a used imported vehicle, but it started showing O/D off light flashing some days ago , and the transmission is behaving funny, experiencing slowdown at 2& 3 RPM along the jerking which is more pronounced now , even after changing the fluid. Codes PO328 and POO31 HO2S, but a car electrician inspected it thoroughly and said one fuse in the valve body of the transaxle is bad saying its better to get a new transaxle.What do u advise?
need more vids man
sorry friend, I'm in mexico, I have a pontiac firebird v6 engine 3.4 whith this transmision, my trouble is the car start in second gear. this, do it is problem of my valve body??? thanks for anwser my question,, sorry for my traduction...
can this be done with the transmission in the car still?
can the seal ( O-ring) on the connector be replaced without removing the valve body?
Cool..
Les
thanks this helped alot
what does solenoid A and B do?
'97 4L60E. Original (except fluid). 209 thousand miles and rising.
great job
How can i find the transmission (type) number if the bar paper is off the transmission . Can i find the transmission type or number by the vin number?
can i replace the manual valve and linkage with out removing valve body?
@jpourkav hey budddy, I asked a friend and he said he has pu shift kits in from under his begicle, without having whole transmission removed. Im gunna use these vids to overhaul my tranny, then later use this advicce to replace with shift kit : ) I was told to LOOK AND WATCH OUT FOR check balls, but valve body is fragile too... mabye best option is to do removal and inspection in one whole go? if ur comfortable and have the area.
Muy. Buen. Video.
We have a Ford AOD video you can get at our website.
Click the BoxWrench logo on the upper right of this RUclips page to get to our site.
@goddamncompsux i just shift mine manualy 1,2,3,D on the column when i want to rag on it
I need to clean valve body what is best solvent miniral spirit
On My 4l60e I removed 8 check balls.....where did the 8th one fall from??
Ruh-Roe !
ddb313 the 3 4 accumulater valve
Hello professor I have a problem after changing the oil Camry 2012 where a problem occurs after converting 2 to 3 please help
tengo 2003 enboy hase todos los canvios. pero no gira el cardan ni camina ustedes que opinan
PWM is short for Pulse Width Modulation, not module
Where do the seven checkball valves go?
Goog job
I fallowed all the steps removed all the botls and my valve body still doesnt want to come out
I'm not real happy. I ordered one of these videos on the 19th of January 2013. It is now the 20th of February and I still haven't recieved it. It sure didn't take them long to get their money. I'd just like to have my DVD.
cool thank you
93-95 s10 blazer have the same transmission
i got a easier way then doing all this to remove wire harness. at 1.56 you take the 3 bolts out that hold the round thing in the top left corner . then that comes down then you take the bolt from the side of the sensor that is blocking you from pulling the wire down then you remove the wire there is no need to mess with the valve body
my tranny is leaking where the rod comes in to select the gears(the rod at 4:53 but not the manualk valve link) , prndl, can i fix this without taking off the valve body?, as it is connected to manual valve.
I need the diagram of jetta a4 2004 i forgot the positions
WTF is a silinoid , I know what a Solenoid is :) Which vehcle is this 4L60E Trans fitted too ?
good video, he sounds alot like that jeff foxworthy
Ooops! I have 8 check balls. Guess I'll just throw the 8th away, as you say there are only 7. Wouldn't want to screw this up, now would I?!
There are 7 in the valve body, and 1 on the case.
Não tem nada sobre cambio automatico do toyota camry 93 4cc. 16 vl. 2.2
pulse width MODULATION
@caliwood909 - BE CAREFUL, I used a LS style 4L60E with an older Vortec 5.0 series motor...Nobody knew it or told me till it was too late...but you likely need an adapter kit!!!! Its $200 bucks...CrateEngineDepot. com...Transmissions...4L60E..adapter kit. Good luck
cool next.
donde coño se consigue un manual aqui en venezuela
You can remove that without taking off valve body it looks like...
I want a way packaging Algerbox in Arabic please
also SOlenoid not sellenoid
oh crap. This looks way too complicated for me to learn how to do.
NEEXT!
neyyyyyyyyyyyyext
tempat ball valev bodi mitsubishi galant metic
@UNDISCOVEREDSTAR2020 - Therearenodvdsfor95saturntransmissions
oik
neeeeeeeeextts
lol
haha
Why do i feel like he is patronizing me?
ni puta idea teneis
i vote no. if you came here, learn english. we should not cater to you. we could not move to bangladesh, or russia, china, chile, zimbabwe, etc and start resquesting the nation to give us everything in english...they would laugh. its crap that we're paying for with our taxes that in no way benefits us.
just because english is the most common language in the united states in general doesn't mean it's an official language. We don't have one. a full 30% of the nation speaks spanish. Get with the times. Us native-americans get shitty when people try to force their invader language on others!
John Lord sorry to break it to you but English is the American language if you don't like it cash you money into Paso and go south
Não tem nada sobre cambio automatico do toyota camry 93 2.2 4cc. 16 vl.