Installing a Torque Converter Part Two | Curt's Corner at Monster Transmission
HTML-код
- Опубликовано: 12 сен 2024
- Monster Transmission Presents Curt's Corner and how to properly install a Torque Converter. Part 2
Check out our Torque Converters to see what is right for your application
www.monstertran...
Or give us a call | 800-708-0087
![Torque Converter Install and Setback Clearance - THE SKID FACTORY - [Quick Tech]](http://i.ytimg.com/vi/gYdsbVCDgUs/mqdefault.jpg)
Thank you for your help today. None of the other videos I watched told me to put fluid in before I installed the converter. I appreciate it
Hi Tony,
Yes you can.
After you remove the driveshaft and slip yoke, the transmission mounts, unbolt the trans from the motor, drop the transmission, then put in the new torque converter and re-assemble.
Yes it will if there isn’t anything wrong with the transmission. The two do share fluid so only replacing the converter may or may not fix any issues and improve anything. Any piece of debris,contaminate or broken internal parts can get in the valve-body and cause issues.
Yes it is possible that it could be the converter, that is known to happen for Galants. Have you had it serviced recently where they changed the filter? If bolts were over tightened on the filter that might be a cause of your problem as well.
Awesome video, really helped with my install. I Will be going here for any automotive help I need in the future.
+Jeffrey Newsome That's great to hear! Thanks Jeffrey!
Man i i stalled a monster torque converter Bro and i dont regret was a little high but well worth it my tires smoke real talk have the Thor gold torque converter for a Chevrolet
Some great tips. I watched some other videos . This was the most informative!!!!
Thank you Todd!
I own a honda pilot 2017 model, there is some sort of whining /rattling noise from around the torque convertor area, dealer told to replace torque convertor, there is no slipping of gears or anything so far noticed, car is smooth to drive, but fuel economy is turning bad now a days, replaced transmission oil & fuel injectors recently , as there was one DTC for misfire in cylinder 5. All 6 injectors were replaced , no more DTC. But this sound is annoying now, its not from DI pump, they told its from torque convertor, should i replace it at the earliest / should i try flushing the transmission oil twice/ thrice , will it work out / should i go for replacing torque convertor. The previous owner was not maintaining the car well. When i took the car , there was no noise, the second day from cold start, i noticed this sound & took to dealer
Hello monster Will putting a performance converter in an older automatic transmission increase power and better fuel economy Example 6.0 lit motor fuel injected .
Liked the video very much!
Hey listen I have a 04 Suzuki XL-7 4X4 and put way too much ATF ,now I have codes for the speed sensor and solenoid E stuck or shorted, not to mention fluid leaking rapidly from the plastic cover on the bell housing.
Can I fix this transmission or get a new (used) one?
Thanks, Nestor
+Nestor Lugo Your best bet is to drain the fluid out to its proper level, clear codes and then go from there. If you have any further questions feel free to give our tech support a call at 800-708-0087. Thanks
I removed my 4L60E and my converter stayed on my flex plate. I reinstalled the same transmission back and just slid the output shaft back into the torque converter and bolted it back on.
Did I screw something up? Or am I fine? I see people spin their converter on to install. My trans slid back into place and bolted right back up to the back of my motor.
Everything was how it came from the factory. I just removed it to install my motor in the car. So I assume that’s where it came off, it should go right back to where it came off and be deep enough for the pump right?
You always want to Install your converter to the Transmission by Hand to ensure you do not Damage the Pump rotor. If you installed by having converter bolter to flywheel and pressed on the Transmission for install you will have most likely stacked the pump. There are 2 tabs you must line up before installing.
@@MonsterTransmission so am I good then? I’m not sure if “stacking the pump” is a good or bad thing. Sorry lol
Yes unfortunately if it has a stacked pump it would need to come back out for repair and you most likely will have no engagement if this is what happened.
Thought you would have to put 5 quarts in the converter before you installed it.
Yes the torque converter could be your problem.
I forgot to put a qt. In the 200r4 converter will the pump fill the converter before any damage occurs ?
Yes it will fill up
how much fluid do you add into the converter?
After the instalation am i have to tune ?
How can i confirm the stall?
I'm disabled and my torque converter is going bad on my car. I can't afford to have someone replace it. I also can't do it. What should I do?
Unfortunately, there's not much else you can do besides replace it.
I have a 1996 2500 ram 12v I replaced all the solenoids inside of my valve body I still have no overdrive light on my push button
Check for power to switch. Check fuses both inside the truck, and under hood fuse panel.
If further diagnosis is needed give us a call, 800-708-0087.
I have a 2006 jeep wrangler and Im getting a high pitch squeal from the front of the trans. Its making noise in neutral and park and only makes it when in gear if its goining down the road and not idling.Is this a bad TC ?
I have a 2001 Mitsubishi galant 4 cylinder. My gears aren't engaging no cel codes. I think it could be the converter any thoughts? No gears at all.
should the outside surface of the torque converter hub that goes into the tranny be really smooth?
mine has a layer of surface rust on some spots from sitting under a carport. also some light pitting.
should i just use fine sand paper to sand down the parts with the surface rust?
will the very small pitting affect anything?
Hello! I would recommend giving our team a call at 800-708-0087 and we can help you get a new torque converter. I would be concerned with changing the factory tolerance/clearance on your converter and causing it to seat to far into the pump.
quick question I have a Nissan Altima 01with trasmision problem. I was backing up and I heard a pop and it stopped working it wants to engage but nothing any tips maybe 😟
Hi Tony, we'd be happy to give you some technical help with this, give us a call at 800-708-0087.
I have a 2007 Dodge Ram 1500 automatic transmission and it has a shutter at 1300 rpm only at speeds or around 30 mph and 45mph when I barely give it gas, goes away when I give more gas or if I let off the gas it goes away. It feels like I'm running over bumps like the grooves on the road side of the interstate. The transmission does not ship, you can just feel the truck vibrate ,... Bad torque converter? A Dodge dealer said it was the clutches but the transmission does not slip so I don't see how it could be the clutches.
It may have a bad dampener in the torque converter. It is also possible a bad injector could cause that.
GOOD VIDEO
Any can subtitle in Spanish pleasse ?
I have a 350 transmission if I change the stall will I have highway mileage because right now I can't drive pass 50 miles and hour
+Charles Pace Your best bet would be to go with an overdrive transmission like a 700R4. This will give you the overdrive and allow you to drive the highway speeds you are looking for.
hello,I had problems Whit my flatwheel ,I change it but I lost traction,what can it be? thanks
+German chavira Did you replace it with the same size flywheel? Is it just not engaging?
thanks for the info about the synthetic oil
+Bob Voyner You're Welcome!
Mineral water ?quart mineral water ?
Haha no don't do that! Mineral Oil :)
What would cause a 4l60e to leak fluid from the bell housing??
jcanchola08 The most common cause would be a worn front seal.