⚠ Safety Notice: I'm pleased to see that many are learning a new skill with the help of my tutorial. It has since been brought to my attention that whilst having the cappuccino maker attachment removed, as demonstrated - The plastic nozzle that forms the tip of the steam wand on this machine can potentially become loose during the steaming process and shoot into the milk. This nozzle is indeed intended to be removable for cleaning purposes, however, it would appear that the rubber O-ring that holds this nozzle in place, may not always provide a sufficient hold during the steaming process under certain circumstances. To try prevent the event in which the before mentioned nozzle shoots off into the milk during steaming: -- Be sure to not submerge the tip of the wand too deep in the milk while steaming, it only needs to enter into the milk by a centimeter or so at most. Doing so may reduce the chance of the steam pressure increasing in the wand and backing up, only to then escape out of the least resistive path available - the weak joint of the nozzle fitting. - Build the habit of pushing the nozzle up firmly to check it is fixed in place every time before turning the steam wand on. - Clean the inside of the nozzle and purge the wand thoroughly prior to steaming to ensure no dried milk deposits are restricting steam flow out of the tip - After cleaning the steam wand components and O-rings always allow them to completely dry before reinstalling, to prevent slippage during operation. (Also be careful not to stretch or damage the rubber O-rings as this will negatively affect their functionality) - Regularly check the condition of all components and O-rings and replace if faulty. If the O-ring frequently does not hold the nozzle in place securely, consider replacing it. - Follow the manual provided by the manufacturer. - To completely avoid the issue, do not operate the steam wand without the cappuccino maker attachment on. When twisted into the locked position, this attachment secures the before mentioned nozzle in place. Operating the steam wand with the cappuccino attachment removed as demonstrated in this video, is done so at your own risk and responsibility. Always practice caution when dealing with steam, failure to do so could result in burns/injury. If you have any questions or concerns regarding your machine and/or components then please contact the manufacturer. The instruction manual for the machine shown in this demonstration can currently be found here: www.delonghi.com/en-au/manuals/ecam22-110-sb-magnifica-s-automatic-coffee-machine/p/ECAM22.110.SB
Yeah, was going to say, I've tried this method and mine pops right off if I don't have the big cylinder on. I think it might be because I regularly remove that steam wand part to clean it.
Yes, 100% true, I have had my steam wand pop off a few times with the panarello nozzle removed ( which you really need to do to get micro bubbles) and shoot off at high speed into the milk, my fix for this was to saw off the bottom half of the panarello and then re attach to the wand leaving the bottom part of the wand exposed but firmly held in place by the top half of the panarello...hope that makes sense, I have used mine perfectly safely for a few years like this
I was trying to make silky milk/foam texture with metal attachment on it for months and I had never succeeded. Reading this comment, yesterday I have tried without metal attachment and result was perfect at first shot (of course with recomendations on placement in this video). It's quite funny why Delonghi imposes that metal piece, it's almost useless.
Wow... You're an e.x.c.e.l.l.e.n.t. teacher! I've never ever seen such a detailed, efficient explanation about this subject... Your drawings made total sense! Thank you so much!
Amazing coincidence! A few days ago I bought a similar espresso machine (DeLonghi MagnificaS) and today I tried to make milk froth. The result was that there was runny milk at the bottom of the jug and foam on the top. I thought there was something wrong with the device. Luckily, I happened to find this video by Tyler and now I know how to make milk foam. It is also nice to know that there is nothing wrong with my coffee machine! 😂 Thank you very much, Tyler, for these excellent instructions!👍
Gosh, finally someone with a proper explanation for this specific machine! Loved every bit of the video! This is so detailed, this time I'll succeed! :D
I was struggling to understand how to make the right amount of steam with this machine and finally i made it! Thank you very much for your precious tutorial
Omg thank you!!! I’ve had one of those machines for years and I always hated steaming milk, can’t believe I never realised you can take that silver bit off!! Makes so much sense. Finally I can make coffee at home like I used to😄
Thank you for an instruction video that is so straightforward it makes me feel like a dummy after fighting with the downloaded instruction manual. Not all heroes wear capes. 🏆🏆🏆
You have no idea how long I've been trialling and erroring on this particular model with the steam attachment on. Thank you so much for posting. Off now to do trial number 1,857,493. Thanks again.
Thank you for this video, I was able to make cappuccino successfully using the same machine. The illustrations are really helpful. Greetings from Japan! 🇯🇵
Had this machine for a few months, watched a few videos and frothing has been hit and miss Tried it after watching yours and came out perfectly first time Great video, thanks!!
I have this machine for over 2 years now and I've been frustrated with my results. I try with your tips! The idea to just try without the attached cap never crossed my mind 😅
Your video has helped me tremendously with steaming the milk with this machine. Lots of silky foam, very pleasant to see the end result. I now have a new task - learn to make simple latte art
Thank you so much for this video, it was so helpful and I feel like I am finally getting a hang of steaming and skimming milk! So glad I found this video and the best tip was to take the plastic thing off, it changed everything and made it soo much easier.
Just got mee a Delonghi magnifica s..never steamed milk before so all I get is foam and runny milk on the bottom...gonna master this! Very illustrative and informative 👍
The best video in how to use an Espresso machine especially on froth. It’s a science which many don’t understand. Just like how and with what type of sauce goes with what shape of pasta😁
Mate! Thanks for posting this, I have an older version of the Magnífica and has the same attachment as yours. I took it off and after following your instructions, I finally made decent frothed milk 🙌🏼
@ thanks to you. I’ve watched several “how to” videos to froth milk but they fail to explain the basics in plain words, plus you have the same brand of machine I have. I actually watched your part 2 video and over this weekend, the way I froth milk has improved 1000%. 🙌🏼 I’ll be watching all of your other videos now 👌🏼👌🏼
@@ernestosanchez7497 Thanks a lot and well done to you, it's fulfilling to know my efforts contribute to new skills learned, and subsequently moments of joy for people. So thanks for your feedback, all the best :)
Great video, got the Magnifica Delonghi S, after my old Magnifica Delonghi broke down. Went through about 6 coffees this morning making a complete mess, as my old way of doing would not work on this new push button machine. Was using to turning the knob for steam and never had a problem before. Your method is excellent, though I left the cap on as the smaller attachment fell off - got a lovely creamy coffee thanks!
Thank you soooo much! I have just ordered espresso machine magnifica S! I love cappuccino and milky coffee in general! I believe i understood the process! You are very analytic ! I hope i'll make it as perfect as yours! ❤️
Thank you so much. I have the exact same coffee machine but every time I tried to steam Milk it was just very rough foam at the top and milk at the bottom, first try after this video is already so much better!
Hi Tyler! Firstly, thanks, this tutorial is simply brilliant! I bought our machine a couple of months ago and enjoyed a blissful month of perfect, silky cappuccino foam. By following your instructions I got perfect result every time.... ... but a couple of months on I'm in cappuccino hell. Now, no matter what I try, I can't get a decent foam. I'm sure I'm doing everything as before but it's just now working. Stretching no longer seems to work - I seem to be getting larger and larger bubbles instead of tiny foam, and I can't get the vortex going at all with that, it just turns into a bubbling, boiling mess that disappears leaving hot milk with a tragic skim of disappointing bubbles. I'm using exactly the same full fat milk. Same jug. I've rigorously cleaned the wand by hand and thru the dishwasher. I've purged, cleaned, purged again and cleaned again to no avail. O rings and everything to do with the machine looks fine. Nothing else, as far as I can see, has changed. Water here is soft and I only use Brita filtered water water in the machine anyway, so there's not a hint of scale anywhere. Any suggestions on what's wrong would be gratefully received, or I'm going to have to give up and just drink espressos!
Wow! Great video! I finally undestood what I did wrong, I have a similar machine which doesn't let me tilt the angle and I tought I needed a machine with a tilting angle frother.
Thanks :) glad to have helped. Yeah having an angle on the wand does help form a vortex, but it is possible without it, if you counter-angle the pitcher enough. You can notice in my other coffee videos I actually tilt the whole machine back to create a bit of an angle on the wand as I found it helps establish a vortex quicker, it's a subtle difference but one that I do find helps me.
@@tyler.martin yeah, I tried tilting the machine also :))) I have this DeLonghi for 8 years now and never liked the frothing. Thanks for the tips, they really make a difference. Now I'm watching your stronger coffee video :)) as my machine does not make the coffee strong like it used to in the beginning.
Thanks! I've always wondered how people get the milk to spin on a home machine, as I always end up getting too much foam. Going to try without the attachments on!
I appreciate that I am a bit late to the party, but I've just bought the Magnifica Start (which is practically the same as the S) and just wanted to say how great this video tutorial was. Really well done - kudos Tyler! 🙏 There'll be a lot of frothing and paper tearing sounds over the weekend! 😉
Thank you so much for sharing this video. I have been trying to froth the milk so wrong. I thought it had to have lots of bubbles in it. I have learnt so much from your video. I just bought a Magnifica Evo and tried your tips and my first cup of coffee was amazing. Thank you. ☕
That was amazing. You are amazing. Thank you so much for this. I just detach that plastic silver piece. That is what must be causing me issues with getting the consistently you just produced. ☕️💚
Thanks man, so helpful! Quick question, when the wand is active should water be pouring from the spout? I’m not sure if this is just my machine or if it’s perfectly normal? I thought it was supposed to just be air
No, it should just be delivering steam, if the parts haven't been regularly cleaned then you could have built up deposits inside causing it to drip in combination with the steam. Also incase I misunderstand your question and you're maybe not aware - if you don't press the steam button prior to opening the steam valve then it will deliver hot water only. To deliver steam from the same wand, first press the steam button, wait a few seconds, and then open the steam valve.
Thanks for this video. I've been struggling to get anything like polished milk. Just froth and hot milk at the top and bottom of the jug. I hate the shroud thing over the wand because I need to keep removing it to clean after each drink. But after watching this, I'm going to remove it and put it in the drawer.
Thank you, I've found that the cappuccino maker attachment seemingly reduces the directional force of the steam. This can make it more difficult to generate sufficient speed on that all important vortex, which we need present from start to finish to distribute the introduced air throughout the milk. The only issue that has been brought to my attention thus far, with having this attachment removed. Is that the nozzle that forms the tip of the wand residing beneath, can pop off during the steaming process. So ideally, for your safety - this nozzle should be fastened more securely in some way.
Thank you for this video! I have exact same machine. However, I can’t get the milk as silky/creamy as yours. Maybe the the type of milk affects it? E.g. UHT vs fresh? Also the size of the milk pitcher might be a consideration - the degree of movement up/down the steam wand seems to also be a factor. Comments?
I am using a 14oz stainless steel pitcher, there are links in the video description. If you prefer dairy milk, a full-cream milk will yield the best results for texture and pourability. To achieve similar results using a plant based milk, opt for a barista formulated blend. These are specifically made for steaming. Note that different brands and different types of plant/nut milks all behave differently when steamed, so experiment with different formulas. Personally when steaming nut milks, the best results in both texture and taste I have achieved with them, has been when steaming barista formulated almond milks. This is including the latte art pourability.
This is a great video thanks, such good tips. The problem i keep experiencing is that my steamer seems to clog up or stop steaming during the initial stage of just breaking the surface of the milk. I then need to stop steaming and let the wand start steaming again. Any ideas on what i am doing wrong?
That doesn't sound ideal. I recommend purging the steam wand prior to steaming milk, purge until the steam is coming out strong and steady, this can usually take at least 10 seconds, then close the steam valve, submerge the wand in the milk about 1cm and then reopen the valve. I do this transition within a second or so, otherwise the steam supply has to reinitiate again from the dribble it begins with, defeating the main point of pre-purging - with this machine. If a lack of sufficient pre-purge isn't the issue then it could be that you have limescale build up in the machine and wand, so a de-scale could resolve the problem or maybe even run the descale twice if it's over due. Also make sure the wand tip nozzle attachment is clean on the inside, it can easily be half blocked with dried milk over time if you don't post-purge, and take it apart to clean often. If none of these things help and there's plenty of water in the tank and you don't have a blocked water filter that needs replacing, then I'd probably begin to suspect a mechanical fault .
I just got this machine as a Christmas present and my god it is so so difficult to do the milk with this thing!!! I had a Breville before until it broke from old age and that worked way better. oh well I'll get there I think I need to get a smaller jug as the arm is way to small which is the whole problem! As you can see in the video the one in the video is smaller than the usual size we use at home and I think he should say what size the jug is as I am finding it impossible to find out what is the best size to use with this tiny thing.
Hi Catie :) In this video I am using a 14oz milk pitcher, there are links in the description that may help you find one. I find with the limited steam output, it's best to use a small pitcher to steam the milk for one drink at a time.
My attachment always pops off unexpectedly and it’s super dangerous so I ended up tying a zip tie cable just below the O ring. It’s worked for me so far but I just wishes this problem was not there to begin with considering how expensive this machine is in my country .. Also, this video is so helpful! I gave up trying to make steam milk a long time ago but I feel like I can do it now 🫣waiting dor the machine to descale right now. Wish me luck 🥹
Sorry to hear your having this problem, please share your experience under the pinned comment relating to this if you feel it could help others. Thanks for watching, and all the best :)
That's what mine was doing so I looked at it very closely asni was attaching it and I found that there is a tiny little notch you need to line up on to the nozzle once they both line up u push it up as hard as you can until you hear a click.
This is the most informative and clear video I have found after searching over and over. THANK YOU so much! Can't wait to practice now. What size frothing pitcher are you using? Do you have a link?
Hi Marcia, thanks for your comment. I am using a 14oz pitcher, and yes there is a link in the description which should display a similar one on amazon if not the same. On this machine either a 12 or 14oz stainless steel pitcher will work best. Thanks for watching :)
Hello, I am having a De’Longhi Dinamica ECAM 350.15.B Which comes with a Panarello wand. I managed to buy and fit in a rubber attachement which is longer than the original one, so I can use it wihout the metal cap but I am still struggling with positioning my metal milk jug, bacuse the space is very limited. Can you please advise? I have some pictures also, not sure how I can attach them here tough. Thanks
I see, I'd maybe try coming in from the left side of the machine, with your pitcher spout pointing towards the right side of the machine. Point the steam wand in the center-left of the pitcher and tilt the pitcher back a little with the aim of creating an anti-clockwise vortex. Also, only while steaming - I would also prop the left side of the machine up with a tea towel folded 5 times or an oven glove folded once, just to create more of an angle on the wand and therefore reduce how much angle I need to tilt the pitcher, you can see me doing this in my other videos, but the only difference in my circumstance is that I tilt the machine backwards. Lastly, using a small pitcher no larger than 400ml helps with limited space and weak steam output on some of these machine. I hope that helps and that you manage to create the necessary angle with your machine, best of luck.
@@tyler.martin thank you. I can also bring the wand to the left of the expresso machine (45 degrees) but I am not sure if that would help me. Is there anyway I can send you pictures to show you more precise my setup ?
@@tyler.martin I am not sure what you mean by this, in which video can I see it ? Thanks ( prop the left side of the machine up with a tea towel folded 5 times )
@@lupalb121 You can use whatever you want, obviously whatever is handy in the kitchen at the time to add more of an angle to the wand in an attempt to closer simulate a cafe machine wand vs a wand pointing directly down. It's not ideal having a locked position wand so it's just a little work around that makes a little difference. You can see me adding some tilt here: ruclips.net/video/UHK7vY4Pvjw/видео.html and here: ruclips.net/video/ncQIFaSu0dQ/видео.html I'm essentially placing something under the machine at an angle in the opposite direction to that which I am tilting the pitcher. I do this to compensate for the lack of angle on the wand on this machine. Typically a barista will have the wand at an angle of up to 45 degrees while stretching the milk. If you can't tilt the wand then hopefully this explains tilting the pitcher and the machine instead. The angle not only initially helps to induce a vortex sooner but also allows the steam break the surface of the milk in a way that induces microbubbles, like skimming across the top a little rather than plunging directly down into it making big bubbles. The sweet spot has to be discovered with your unique set up through experimentation, once you have the experience it all becomes very obvious what needs to happen. Keep researching and practicing.
@@lupalb121 No I do not currently have a public platform for you to send pictures. If you can tilt to 45 degrees then stand with the tip of the wand towards you, pointing at you, and offer your pitcher up to the wand from there, and aim it at one of these points: ruclips.net/video/6LZ0XKgaPbM/видео.html
Great video I have the magnífica start and when I use these settings no coffee is extracted. Seems to only extract from around grind size 3? Also for oat milk would the same theory apply for stretching?
That sounds ok, it could just be that the grinder is more efficient or in better condition than the one in the machine I used, there are also other variables to factor in such as the physical attributes and condition of the beans used in each case, so the exact dial setting that works in each unique case will differ. If you get little to no flow, it's usually a result of compressing coffee that is ground too fine. So you adjust a notch less fine and reassess, remembering it will take 2-3 coffees to show the new results of each setting change. Start off fine and work your way towards coarse until you get a slow flow. The idea is to find a setting where the espresso flows out slowly, with a higher viscosity than the factory default watery shot. It's also important to remember that the exact settings required to achieve the ideal flow will vary slightly with each different batch of beans, so sometimes adjustments are required each time you add different beans. You can also experiment with turning the min/max dial on the face of the machine anti-clockwise slightly if you get no flow on the finer grind settings - as having a too much coffee ground up and compressed in the machine will also potentially restrict flow. It can also help to take the infuser out of the machine and clean it regularly for optimal flow, the instructions to do so are in the user manual. Yes the same theory applies, aerate and emulsify. However if the liquid lacks the necessary macros/components such as protein and fats then the process will not occur exactly as shown, and the introduced air will not remain suspended for as long as intended. If you're not using diary milk then you can use barista formulated plant based milks to achieve similar results. Or with the addition of the necessary ingredients/macros you can adjust the chemistry of your chosen plant based milk yourself to have it more closely resemble that of diary milk.
@@tyler.martin one more thing. With my oar milk I am able to get super silky milk but only about 1/3 of the milk is like this, the rest is like it has not been worked. Is this cos I didn’t generate enough bubbles or work them in deep enough? Again thank you man - easily the best tutuorisls on RUclips for this 🤟🤟🤟
@@shahedsaffari365 In the case you have foam on the top and liquid on the bottom when using a milk that works, it could mean you haven't had a vortex from start to finish folding the air throughout the entire mixture, so it'll just sit on top, or you've steamed too hot and excessively broken down or denatured the proteins resulting in the air releasing. However if you're not using diary, or a 'barista formulated' plant based milk specifically made for steaming then you'll work the small amount of reactive components available in the said liquid and get some result sat on the surface yes, but beneath that foam layer the majority of liquid will just be flat as if it hasn't been steamed. Remember it's just water with a very small percentage of oats, or almonds etc depending on what you use. So if you imagine steaming just water by itself, will steaming it achieve the desired creamy result? No because there isn't the necessary protein and fat etc. If I add an odd pinch of oats or almonds to that water and a drop of oil, will that result in creamy milk throughout, no. The ratios have to be right for it to work as intended. This is why there are barista formulated variations of plant based milks available specifically made for steaming, to closer resemble the results achieved with diary due to chemistry. I'd say learn with a milk that is known to work so you can rule out the problem being the milk and know when you've mastered your technique, with that you can then have a solid base for comparison and be experienced enough to quickly recognise which milks work and which don't etc. All plant based formulations behave differently and you learn this best through hands on experience, much like skimmed dairy milk behaves differently compared to full cream diary because of the reduced fat content. There is behaving differently which results in you making minor corresponding tweaks to technique to achieve the desired result, and then there is just plain trying to make it work with something that just simply doesn't have the required chemistry. Protein and fat content are very important.
With the diagrams and everything... Man you could make this an app... Brilliant stuff. Couple of questions. Could you measure the exact amount of milk. In my pitcher I feel I really need to add quite some milk to get the steam wand to reach the surface. Secondly I'm getting this almost loud whistle... It fades one's I really insert the wand.... Any suggestions
Hi Mark, haha glad you liked it. As for the amount of milk, I fill to the 200ml mark in a 400ml pitcher (14oz). The steam pressure available is only really suitable for a single serve in my opinion. I've not heard a whistle sound before but I would describe a very loud sound that gets produced as a screeching sound, and this will happen when there is insufficient air being drawn into the milk by the wand, it is only usually heard right at the beginning for a second, before stretching the milk. First of all from what you've told me, I'd recommended acquiring a stainless steel pitcher of either 12oz or 14oz in capacity, so you can maneuver the wand to the necessary depths without any struggle. A larger pitcher will not work too well with this machine. If you're experiencing the loud screeching sound for more than the first couple of seconds try following these instructions: First be sure to purge the steam wand for 10 seconds or so before beginning to steam the milk to ensure you've got a strong, steady flow of steam. Close the valve and immediately place your pitcher with 200ml milk under the steam wand, submerge the tip at least 1cm, then turn the valve open again to begin steaming the milk. Now, it will likely be loud at this step until you simply begin to lower your pitcher, just until the tip of the steam wand just about breaks the surface of the milk at an angle and injects air, while also promoting a vortex to form. At this point the screaming sound will be replaced with the sound of ripping paper as air enters and begins to produce microbubbles dampening the sound. After a few seconds of injecting air (stretching the milk) at this steam wand depth, you can then raise the pitcher up a little to submerge the wand about 1cm or so to continue spinning the milk without adding more air, stopping once the pitcher is too hot to touch for more than a second on the side. Be sure to have the pitcher angled as shown and described in the tutorial to maintain a vortex in the milk throughout the whole procedure. I hope that helps, best of luck :)
This helped me for ages and my coffee has been great but lately the black part of the wand sometimes fire off and the foamy bubble bath is happening without the attachment anyway. I feel like something is wrong. It’s been descaled.
Hm interesting, and your technique, pitcher, volume of milk and type of milk hasn't changed? As for the wand tip I talk a little about this in another video here: ruclips.net/video/JrFIIMIvD7g/видео.htmlfeature=shared&t=751 There's always a chance it can become loose and fire off under pressure but ensuring a secure fit by replacing the rubber o-ring with a tighter fit and not submerging the wand tip too deep while steaming shall prevent the scenario.
@@tyler.martin thanks. I will check that out. Nothing else has changed. I’m having to reduce my milk volume because it overflows before I reach temperature now. 😏
Great video thank you - can I ask the best milk to use with this kind of machine? Does it have to be full fat or can it manage to froth semi skimmed also? Thanks in advance
Many find that cold full fat yields the best results. Skimmed and plant milks can certainly also work great too - Each milk type behaves differently when meeting steam. Gathering the experience of working with a variety of different milk types can help further establish your understanding and technique, in comparison to a reality wherein you have only ever learned to steam one type.
Hi! What type of milk are you using to achieve this texture, besides the technique you used..? Because I’ve tried every kind of milk (normal/barista/without lactose, etc) and I still can’t really reach that smooth foamy texture for cappuccinos.
If you prefer dairy milk, a full-fat or full-cream milk straight out of the refrigerator will yield the best results for a smooth creamy texture. It has been the 'gold standard' around the world in cafes for a long time. Skimmed milk creates more of a 'foamy' volume, where as full cream milk, containing more cream, unsurprisingly creates that quintessential velvety volume, that marks a decent cappuccino. Though milk choice aside, technique is really important to achieve a decent cappuccino texture and volume, there's more than meets the eye and it only comes with practice and experience. With this machine I find it helps to purge the steam wand for 10 seconds or so immediately prior to steaming to ensure a roaring steady flow of steam before introducing the milk. Maintain a vortex right from start to finish, skim the surface or 'stretch' the milk a fair bit at the start for a cappuccino, once it's spinning that is. You don't want still nor turbulent bubbling milk, clean smooth vortex only. Focus a lot on not making big bubbles, you only want lots and lots of micro bubbles that you can't even really see. What you will see though is the vortex climbing higher and higher in the pitcher as the volume increases. Ensure this new volume is worked throughout the mix by the vortex rather than just sat on top, finishing up with a good polish can help with this also. To achieve similar results using a plant based milk, opt for a barista formulated blend, otherwise it won't foam well or at all. Also note that different types of plant/nut milks all behave differently when steamed, and then also each different brand too. I can achieve similar looking results with any milk, or milk alternative - as long as it's formulated for purpose. When steaming each, it comes down to adjusting technique to suit the particular characteristics and behavior of each different type or brand.
In full working condition, this machine is capable of delivering both hot water, or steam from the steam wand. To deliver steam, you first have to press the steam function button before opening the wand valve, as shown at this point of the video: 12:29 . Once you are done steaming, first close the valve to stop the flow and then press the steam function button again to end the process.
As far as I'm aware, it's not physically possible to achieve the desired texture for latte art without the milk being within a certain temperature range. Typically whenever you see latte art, it has been achieved by steaming the milk, to somewhere usually in the range of about 55 to 65 degrees Celsius. However, if you really want cold milk, you can kind of achieve something that resembles basic latte art if you froth cold fresh milk in a French press, or use an electric whisk, though it won't behave the same and will be far from ideal for pouring anything other than thick undefined shapes. Thanks for watching :)
I know I’m a bit late so I hope you still read the comments here. I have issues with phase 2. Phase one goes ok, I can do the micro bubbles but as soon as I want to submerge the wand a bit more, the milk starts to jump all over , and I can hear the sound changes completely as if it is too hot so it cannot be heated anymore. I think I’m doing phase one same time as you, not longer so not sure where I’m going wrong . Please help
I have some tips for you that could help in more detail below, but from what you've shared, I'd presume there is a lack of vortex speed from start to finish due to adjustments needed with the depth and angle at which you have the steam wand tip throughout. If you're not already, I recommend only using a 14oz stainless steel pitcher with this machine while learning. No bigger, no smaller, and fill it about half way as shown. Firstly when you turn the steam wand on in your milk, you need to make sure it has been purged for about 20 seconds and that it is delivering strong, steady steam right away once in the milk. This machine has a tendency to spit out water at the start and that is going to effect the process. Do that into an empty cup before transitioning the primed flow into the milk. I remember mentioning in the video that the volume of the milk will increase as you stretch the milk, but I don't think I mentioned that you should account for this with your pitcher height. So as the milk 'grows' higher in the pitcher you should be lowering the pitcher height in sync with the surface of the milk to have the wand tip remain just below the surface and not too deep for phase 1. Personally I make adjustments to height and angle throughout by focusing on maintaining the speed of the vortex, watching the surface of the milk and newly created foam be pulled down and incorporated throughout the milk. If it is not doing this I adjust accordingly throughout. I simplified the process in this video for learning purposes, just to get it fairly straightforward and not too heavy in details, but in reality there isn't such a rigid phase 1 and 2 and the whole process is more fluid rather than robotic with set steps, you have to move with the milk throughout and adjust to what it is doing. It will never behave exactly the same every time. So in short, in phase 1 you should be slowly lowering the pitcher as the volume increases to incorporate the newly formed foam into the vortex. If the vortex is slow adjust the height and or angle to maintain it's speed throughout. Also for best results it is important that you have a very steady hand, I often contact one of my hands against the machine behind the wand to stabilise the hold. When you move to phase 2, I exaggerated it a bit in the video by the way to demonstrate the adjustment, so note that you don't want to go too deep with the wand, max 1cm. The idea is that during this stage of the process you don't want to be breaking the surface of the milk anymore, but you still want the tip near enough to the surface so that it continues to move the surface of the milk into the vortex. Also another thing that I believe I didn't state in the video is that by the time you have reached phase 2, you can begin to tilt the pitcher more upright as once the vortex is spinning this tends to give it more speed and also prevents any overflowing or jumping of the milk from the now increased volume. In short, during phase 2 you should only have the wand tip ever so slightly deeper than in phase 1 and can also have the tip more vertical than before, but not too straight down otherwise this will definitely cause the milk to jump and splash. Don't be afraid of being near the surface in phase 2 just be very steady and mindful of not breaking the surface of the milk anymore, just that millimeter or so close enough to include the foam on the top into the vortex. Focus on your wand tip depth and angle throughout, remember it needs to be adaptative rather then a set rigid depth, also again it's important to be maintaining a consistent vortex from start to finish, focusing on incorporating the newly created foam with a steady hand. All the best.
Thanks so much for this! I’ll try and see. To be honest, I did decal the machine 2 days ago and since then, I feel like the quality of the coffee has gone down and also , the milk froth er does not work as good(coffee has less cream)Like if it spouts more water during the process than steam. Is this possible? Also, I do use vegetable milk but barista one so it is almost as good as dairy one though of course, I never get as much cream as I know I can get with the dairy one .
Yeah, you just need to lower your pitcher and inject some air at the start. After you open the steam valve and allow the steam into the milk, simply then begin to lower your pitcher until the tip of the steam wand just about breaks the surface of the milk, thus injecting air. At this point the screaming sound will be replaced with the sound of ripping paper. After a few seconds of injecting air (stretching the milk) you can then raise the pitcher back up a little to resubmerge the wand and finish the process. Be sure to have the pitcher angled as shown to maintain a vortex in the milk throughout all of this. Consider watching the tutorial from start to finish and you'll have a better understanding of it all. Best of luck :)
I talk a little bit about this in part 2, always check the nozzle is firmly in place every time before steaming, clean and dry wand components will offer more grip to one another. Submerging the nozzle too deep in the milk increases the chance of it blowing off.
Hi thanks, currently yes it does. If you prefer dairy milk, a full-cream milk will yield the best results for texture and pourability. Skimmed or low fat milks etc all behave differently but it still works. To achieve similar results using a plant based milk, opt for a barista formulated blend. These are specifically made for steaming. Note that different brands and different types of plant/nut milks all behave differently when steamed, so experiment with different formulas. Personally when steaming nut milks, the best results in both texture and taste I have achieved with them, has been when steaming barista formulated almond milks. This is including the latte art pourability.
I push the nozzle up firmly to check it is fixed in place before turning the steam wand on every time. Also make sure you're not submerging the tip of the wand too deep, it only needs to go a centimeter in. Doing so should avoid the pressure increasing, and then escaping out of the easiest place - the loose fitting.
Hello! Great video! But a little question, how you obtain a consistent shot of espresso on this machine? A saw a lot of people say that the coffee produced from the Magnifica S is not stronger enough. I just sold my Delonghi Dedica and i want to buy a bean to cup machine because is more simple and fast. I practiced a lot of latte art with Dedica and i obtained great results but now i want a little change. If you can help me with some tips for a good espresso, I would be grateful.😊 keep up the good work!
Hi thanks for watching :) This is the trade off with opting for a convenience machine, with which you don't tamp your own puk. You have little control over the outcome, the shot is pulled within a few seconds. The odds are against you if you're hoping to pull a top quality shot. However, I do have a little bit of a work around for you though - providing you're not too particular about the flavour profile and just looking for it to taste strong. With this machine, to try pull a concentrated shot that somewhat resembles that delivered by a commercial machine in a cafe; I opt for a strong bean, set the machine to a fine grind on the dial in the bean tray, and max out the strength dial on the face of the machine. Finally I have the espresso volume dialed in to about 20ml delivery. I combine together two of these separate concentrated 20ml shots so that they form one potent shot of around 40ml, to which I add the steamed milk. The instructions on how to adjust the volume delivered by a particular function are within the user manual. Now, using this method will not satisfy the tasting palate of a coffee connoisseur, due to the insufficient extraction of the full flavor profile. However it will ensure you do taste the coffee over the milk - while maintaining the low water to milk ratio required for many barista style drinks. You want a concentrated low volume shot, not a cup full of hot coffee water - particularly if you want to achieve any latte art.
@@tyler.martin thank you very much! I’m aware that the taste will not be comparable with a manual espresso machine never…but i want to extract maximul from the coffee. Thank you for the tips, i appreciate!😊
@@edibumbaru If you're interested, I do now have a full tutorial on how to adjust the settings to achieve a stronger coffee with this machine. ruclips.net/video/ncQIFaSu0dQ/видео.html
@@tyler.martin thank you, i will watch! In the end i went for a Philips 5400 lattego, because on black friday it was at a very good price in my country. 😁but is very helpfull anyway, because it is also an superautomatic espresso machine. I will try to make latte art with a french press, i hope i succeed😂 thank you very much, i appreciate mate!☕️
If you have the same machine as shown you can adjust the settings as shown in my other video here: ruclips.net/video/ncQIFaSu0dQ/видео.html Once you have improved the 'espresso' and it is about 30ml or so in volume, you just steam milk as shown in this video and then pour it into the espresso to combine the milk and coffee.
⚠ Safety Notice:
I'm pleased to see that many are learning a new skill with the help of my tutorial. It has since been brought to my attention that whilst having the cappuccino maker attachment removed, as demonstrated - The plastic nozzle that forms the tip of the steam wand on this machine can potentially become loose during the steaming process and shoot into the milk. This nozzle is indeed intended to be removable for cleaning purposes, however, it would appear that the rubber O-ring that holds this nozzle in place, may not always provide a sufficient hold during the steaming process under certain circumstances.
To try prevent the event in which the before mentioned nozzle shoots off into the milk during steaming:
-- Be sure to not submerge the tip of the wand too deep in the milk while steaming, it only needs to enter into the milk by a centimeter or so at most. Doing so may reduce the chance of the steam pressure increasing in the wand and backing up, only to then escape out of the least resistive path available - the weak joint of the nozzle fitting.
- Build the habit of pushing the nozzle up firmly to check it is fixed in place every time before turning the steam wand on.
- Clean the inside of the nozzle and purge the wand thoroughly prior to steaming to ensure no dried milk deposits are restricting steam flow out of the tip
- After cleaning the steam wand components and O-rings always allow them to completely dry before reinstalling, to prevent slippage during operation. (Also be careful not to stretch or damage the rubber O-rings as this will negatively affect their functionality)
- Regularly check the condition of all components and O-rings and replace if faulty. If the O-ring frequently does not hold the nozzle in place securely, consider replacing it.
- Follow the manual provided by the manufacturer.
- To completely avoid the issue, do not operate the steam wand without the cappuccino maker attachment on. When twisted into the locked position, this attachment secures the before mentioned nozzle in place.
Operating the steam wand with the cappuccino attachment removed as demonstrated in this video, is done so at your own risk and responsibility. Always practice caution when dealing with steam, failure to do so could result in burns/injury.
If you have any questions or concerns regarding your machine and/or components then please contact the manufacturer. The instruction manual for the machine shown in this demonstration can currently be found here: www.delonghi.com/en-au/manuals/ecam22-110-sb-magnifica-s-automatic-coffee-machine/p/ECAM22.110.SB
Yeah, was going to say, I've tried this method and mine pops right off if I don't have the big cylinder on. I think it might be because I regularly remove that steam wand part to clean it.
Yes, 100% true, I have had my steam wand pop off a few times with the panarello nozzle removed ( which you really need to do to get micro bubbles) and shoot off at high speed into the milk, my fix for this was to saw off the bottom half of the panarello and then re attach to the wand leaving the bottom part of the wand exposed but firmly held in place by the top half of the panarello...hope that makes sense, I have used mine perfectly safely for a few years like this
Ik krijg geen schuim op mijn melklaag helaas.Doe het net zo,maar is gewoon hete melk bij mij.Heb speciale melk on op te schuimen.van Fiese Vlag
Mine keeps popping off. New machine. Trying to get good with the wand attached.
I was trying to make silky milk/foam texture with metal attachment on it for months and I had never succeeded. Reading this comment, yesterday I have tried without metal attachment and result was perfect at first shot (of course with recomendations on placement in this video). It's quite funny why Delonghi imposes that metal piece, it's almost useless.
I’ve heard many explanations of frothing milk on RUclips and this one tops the list….crystal clear👍
Thanks David, I'm really glad to hear such positive feedback :)
Wow... You're an e.x.c.e.l.l.e.n.t. teacher! I've never ever seen such a detailed, efficient explanation about this subject... Your drawings made total sense! Thank you so much!
:) thanks for your feedback, I'm pleased to hear it was helpful to you
Finnaly someone explained steaming on this particular machine. I already did my best pattern a while ago. Thanks and chears!!!
Cheers! I'm pleased to hear this was of value to you :)
Right ?!!
The most detailed instruction for delonghi ecam machines.
This is really helpful, to get a detailed review from someone in the know instead of random people disgruntled with the wand. Thank you
This is the tutorial that I needed! I have that coffee machine and never thought to remove the spout cover while frothing! Thank you so much for this!
You're welcome, I'm pleased to have helped :)
Amazing coincidence! A few days ago I bought a similar espresso machine (DeLonghi MagnificaS) and today I tried to make milk froth. The result was that there was runny milk at the bottom of the jug and foam on the top. I thought there was something wrong with the device. Luckily, I happened to find this video by Tyler and now I know how to make milk foam. It is also nice to know that there is nothing wrong with my coffee machine! 😂 Thank you very much, Tyler, for these excellent instructions!👍
I didn’t know that Magneto can teach us latte art.
Thank you for your Great in-depth tips!!!
Gosh, finally someone with a proper explanation for this specific machine! Loved every bit of the video! This is so detailed, this time I'll succeed! :D
I was struggling to understand how to make the right amount of steam with this machine and finally i made it! Thank you very much for your precious tutorial
Thanks Christian, I'm glad the video was helpful to you :)
Omg thank you!!! I’ve had one of those machines for years and I always hated steaming milk, can’t believe I never realised you can take that silver bit off!! Makes so much sense. Finally I can make coffee at home like I used to😄
Best tutorial on how to froth milk - thank you
Glad to help, thank you for sharing your appreciation
Thank you for an instruction video that is so straightforward it makes me feel like a dummy after fighting with the downloaded instruction manual. Not all heroes wear capes. 🏆🏆🏆
haha cheers, I'm glad the video was helpful, thanks for showing your appreciation.
Thank you very much for simple and comprehensive explanation how to use steam option.
Thanks for watching. Glad to have helped :)
Thank you! Just got this coffee machine and couldn’t quite work out steam pressure properly. Great video
Glad the video helped :) Thanks for showing your appreciation.
You have no idea how long I've been trialling and erroring on this particular model with the steam attachment on. Thank you so much for posting. Off now to do trial number 1,857,493. Thanks again.
Haha woah that's a lot of attempts, yeah the attachment sure can make things more difficult, let me know how you go :)
Thank you for this video, I was able to make cappuccino successfully using the same machine. The illustrations are really helpful. Greetings from Japan! 🇯🇵
Glad to have helped :) Thanks for the feedback
Had this machine for a few months, watched a few videos and frothing has been hit and miss
Tried it after watching yours and came out perfectly first time
Great video, thanks!!
Pleased to hear :) I appreciate the comment, cheers
I have this machine for over 2 years now and I've been frustrated with my results. I try with your tips! The idea to just try without the attached cap never crossed my mind 😅
Thank you so much for taking the time out to produce this very useful video, its much appreciated
I'm glad it was useful to you :) I appreciate you leaving a comment, cheers
Your video has helped me tremendously with steaming the milk with this machine. Lots of silky foam, very pleasant to see the end result. I now have a new task - learn to make simple latte art
Great video! My friend just bought this machine for her boyfriend! Gotta show them this video!
Haha ok :) thanks for sharing it Leah
Thank you so much for this video, it was so helpful and I feel like I am finally getting a hang of steaming and skimming milk! So glad I found this video and the best tip was to take the plastic thing off, it changed everything and made it soo much easier.
Thanks Shandie, I'm pleased to hear it has helped :)
Just got mee a Delonghi magnifica s..never steamed milk before so all I get is foam and runny milk on the bottom...gonna master this! Very illustrative and informative 👍
Best steaming explanation, I'm going to try it. Thank you!!
Thank you! I appreciate your feedback, enjoy :)
Thank you so much for making this video. I was doing it all wrong. Just tried your method and I’m so impressed 😊
:) well done, impressed to hear you got it straight away!
The best video in how to use an Espresso machine especially on froth. It’s a science which many don’t understand. Just like how and with what type of sauce goes with what shape of pasta😁
Thanks for watching! I don't know much about pasta, although I do think I know what you mean haha :)
Mate! Thanks for posting this, I have an older version of the Magnífica and has the same attachment as yours. I took it off and after following your instructions, I finally made decent frothed milk 🙌🏼
Nice one :) glad to hear the video helped, thanks for showing your appreciation. Enjoy
@ thanks to you. I’ve watched several “how to” videos to froth milk but they fail to explain the basics in plain words, plus you have the same brand of machine I have. I actually watched your part 2 video and over this weekend, the way I froth milk has improved 1000%. 🙌🏼 I’ll be watching all of your other videos now 👌🏼👌🏼
@@ernestosanchez7497 Thanks a lot and well done to you, it's fulfilling to know my efforts contribute to new skills learned, and subsequently moments of joy for people. So thanks for your feedback, all the best :)
@@tyler.martin 🙌🏼 you nailed it to explain the key points to froth perfect milk 👌🏼
Great video, got the Magnifica Delonghi S, after my old Magnifica Delonghi broke down. Went through about 6 coffees this morning making a complete mess, as my old way of doing would not work on this new push button machine. Was using to turning the knob for steam and never had a problem before. Your method is excellent, though I left the cap on as the smaller attachment fell off - got a lovely creamy coffee thanks!
Glad you're now happy with your results, well done :)
Thank you soooo much! I have just ordered espresso machine magnifica S! I love cappuccino and milky coffee in general! I believe i understood the process! You are very analytic ! I hope i'll make it as perfect as yours! ❤️
Keep your excellent work my friend. Your videos are the best for the begginers! Cheers and the best of luck 🙂
Thanks :) glad to have helped
Thank you for that! Great explanation. Now to try it.
Thanks for the video! Using your techniques made a huge difference for me!
pleased to hear :) thanks for leaving a comment.
wow! I've just bought my Magnifica yesterday. I've had no idea there is a batista science of steaming milk! I'm glad I didn't buy an automatic one.
Great video. Silky smooth milk. Your video was a big help to get better microfoam with this machine. Thank you!
Thank you, I'm glad to hear it was helpful :)
I have the same machine so watching this video is a very big help for me. Thank you for this!
I'm pleased to hear Jesse, thanks for showing your appreciation :)
Thank you so much. I have the exact same coffee machine but every time I tried to steam Milk it was just very rough foam at the top and milk at the bottom, first try after this video is already so much better!
Glad to hear :) Thanks for watching
The best tutorial ever
Very well explained, thanks for your time!
You're welcome :) glad it was helpful
what an excellent tutorial - thank you
Thank you :)
Brilliant video. Thanks very much. Dying to try it out
fantastic i have watched alot of others about this machine and this ( you ) are the best,even i can work it now lol thanks so very much.
Thanks for the feedback :) I'm glad it helped
Hi Tyler!
Firstly, thanks, this tutorial is simply brilliant!
I bought our machine a couple of months ago and enjoyed a blissful month of perfect, silky cappuccino foam. By following your instructions I got perfect result every time....
... but a couple of months on I'm in cappuccino hell. Now, no matter what I try, I can't get a decent foam. I'm sure I'm doing everything as before but it's just now working. Stretching no longer seems to work - I seem to be getting larger and larger bubbles instead of tiny foam, and I can't get the vortex going at all with that, it just turns into a bubbling, boiling mess that disappears leaving hot milk with a tragic skim of disappointing bubbles.
I'm using exactly the same full fat milk. Same jug. I've rigorously cleaned the wand by hand and thru the dishwasher. I've purged, cleaned, purged again and cleaned again to no avail. O rings and everything to do with the machine looks fine. Nothing else, as far as I can see, has changed. Water here is soft and I only use Brita filtered water water in the machine anyway, so there's not a hint of scale anywhere.
Any suggestions on what's wrong would be gratefully received, or I'm going to have to give up and just drink espressos!
Wow! Great video! I finally undestood what I did wrong, I have a similar machine which doesn't let me tilt the angle and I tought I needed a machine with a tilting angle frother.
Thanks :) glad to have helped. Yeah having an angle on the wand does help form a vortex, but it is possible without it, if you counter-angle the pitcher enough. You can notice in my other coffee videos I actually tilt the whole machine back to create a bit of an angle on the wand as I found it helps establish a vortex quicker, it's a subtle difference but one that I do find helps me.
@@tyler.martin yeah, I tried tilting the machine also :))) I have this DeLonghi for 8 years now and never liked the frothing. Thanks for the tips, they really make a difference. Now I'm watching your stronger coffee video :)) as my machine does not make the coffee strong like it used to in the beginning.
@@AndyFerdean Great, glad to have helped, hopefully that video helps too. Enjoy
Thanks! I've always wondered how people get the milk to spin on a home machine, as I always end up getting too much foam. Going to try without the attachments on!
Thanks for watching, hope it helps :)
That was brilliantly explained and illustrated. 😊
Thanks Adrian :) I really appreciate the feedback
I appreciate that I am a bit late to the party, but I've just bought the Magnifica Start (which is practically the same as the S) and just wanted to say how great this video tutorial was. Really well done - kudos Tyler! 🙏 There'll be a lot of frothing and paper tearing sounds over the weekend! 😉
haha thanks! glad to have helped, enjoy
Love the explanation! Thank you!! If i don’t nail this after this tutorial 😩…. i will start making latter art with the a stick
Thanks for watching :) Don't give up
Perfect explanation! Thank you kind sir!
Thank you :) Enjoy!
Thank you so much for sharing this video. I have been trying to froth the milk so wrong. I thought it had to have lots of bubbles in it. I have learnt so much from your video. I just bought a Magnifica Evo and tried your tips and my first cup of coffee was amazing. Thank you. ☕
Thanks Linda :) the comments like this make me smile, thanks for sharing
That was amazing. You are amazing. Thank you so much for this. I just detach that plastic silver piece. That is what must be causing me issues with getting the consistently you just produced. ☕️💚
Thanks glad to have helped, that's right - having the attachment removed certainly makes a difference :)
This is soo good , many thanks from Sweden , and Happy New Year 🥂🍻🎉🎊🎈
du är välkommen, tack :) detsamma
Thanks man, so helpful! Quick question, when the wand is active should water be pouring from the spout? I’m not sure if this is just my machine or if it’s perfectly normal? I thought it was supposed to just be air
No, it should just be delivering steam, if the parts haven't been regularly cleaned then you could have built up deposits inside causing it to drip in combination with the steam.
Also incase I misunderstand your question and you're maybe not aware - if you don't press the steam button prior to opening the steam valve then it will deliver hot water only. To deliver steam from the same wand, first press the steam button, wait a few seconds, and then open the steam valve.
Superb demo, must try now for the perfect barista style coffee👍
Thanks Nisha :) enjoy!
Best video I have seen yet
:) Thank you, I appreciate the feedback
Excellent explanation, thanks!
Glad it was helpful to you. Thank you for stopping by :)
Thanks a lot, super useful tutorial, all the best mate
Cheers :) glad it helped
Makinanin yeni versiyonunu aldim.. bir türlü art köpüğü yapamiyordum .. o metal ucun çıkmasi gerektiği hic aklima gelmedi video icin tesekkurler 👍
Rica ederim :) Videonun yardımcı olmasına sevindim
Thanks for this video. I've been struggling to get anything like polished milk. Just froth and hot milk at the top and bottom of the jug. I hate the shroud thing over the wand because I need to keep removing it to clean after each drink. But after watching this, I'm going to remove it and put it in the drawer.
Thank you, I've found that the cappuccino maker attachment seemingly reduces the directional force of the steam. This can make it more difficult to generate sufficient speed on that all important vortex, which we need present from start to finish to distribute the introduced air throughout the milk. The only issue that has been brought to my attention thus far, with having this attachment removed. Is that the nozzle that forms the tip of the wand residing beneath, can pop off during the steaming process. So ideally, for your safety - this nozzle should be fastened more securely in some way.
Perfect explanation. Thanks!
Thanks :) Glad to hear it was of value to you
Bravo! Especially great Graphics and Sound Effects! Thanks!
Thank you for this video! I have exact same machine. However, I can’t get the milk as silky/creamy as yours. Maybe the the type of milk affects it? E.g. UHT vs fresh? Also the size of the milk pitcher might be a consideration - the degree of movement up/down the steam wand seems to also be a factor. Comments?
I am using a 14oz stainless steel pitcher, there are links in the video description. If you prefer dairy milk, a full-cream milk will yield the best results for texture and pourability. To achieve similar results using a plant based milk, opt for a barista formulated blend. These are specifically made for steaming. Note that different brands and different types of plant/nut milks all behave differently when steamed, so experiment with different formulas. Personally when steaming nut milks, the best results in both texture and taste I have achieved with them, has been when steaming barista formulated almond milks. This is including the latte art pourability.
Enjoyed video, but unfortunately, on the magnifico evo, you can not purge wand. If you do it then fills with hot water.
This is a great video thanks, such good tips. The problem i keep experiencing is that my steamer seems to clog up or stop steaming during the initial stage of just breaking the surface of the milk. I then need to stop steaming and let the wand start steaming again. Any ideas on what i am doing wrong?
That doesn't sound ideal. I recommend purging the steam wand prior to steaming milk, purge until the steam is coming out strong and steady, this can usually take at least 10 seconds, then close the steam valve, submerge the wand in the milk about 1cm and then reopen the valve. I do this transition within a second or so, otherwise the steam supply has to reinitiate again from the dribble it begins with, defeating the main point of pre-purging - with this machine.
If a lack of sufficient pre-purge isn't the issue then it could be that you have limescale build up in the machine and wand, so a de-scale could resolve the problem or maybe even run the descale twice if it's over due.
Also make sure the wand tip nozzle attachment is clean on the inside, it can easily be half blocked with dried milk over time if you don't post-purge, and take it apart to clean often.
If none of these things help and there's plenty of water in the tank and you don't have a blocked water filter that needs replacing, then I'd probably begin to suspect a mechanical fault .
Does the 22.113 model show the same features? latte art,coffee hot vs
Brilliant instruction 🙂
Great tutorial. Thanks
Thanks for your feedback :) I'm glad you liked it.
@@tyler.martin Loved it, you thought me how to make great coffee with my inexpensive machine, that is golden.
I just got this machine as a Christmas present and my god it is so so difficult to do the milk with this thing!!! I had a Breville before until it broke from old age and that worked way better. oh well I'll get there I think I need to get a smaller jug as the arm is way to small which is the whole problem! As you can see in the video the one in the video is smaller than the usual size we use at home and I think he should say what size the jug is as I am finding it impossible to find out what is the best size to use with this tiny thing.
Hi Catie :) In this video I am using a 14oz milk pitcher, there are links in the description that may help you find one. I find with the limited steam output, it's best to use a small pitcher to steam the milk for one drink at a time.
Is it possible to do Latte artwork with a Magnifica Evo that has a milk container e.g. ECAM290.62
I think not
I thought as much.
BTW, I really enjoyed your videos
@@lionelhobson7640 Glad to hear :) Thanks for watching.
My attachment always pops off unexpectedly and it’s super dangerous so I ended up tying a zip tie cable just below the O ring. It’s worked for me so far but I just wishes this problem was not there to begin with considering how expensive this machine is in my country .. Also, this video is so helpful! I gave up trying to make steam milk a long time ago but I feel like I can do it now 🫣waiting dor the machine to descale right now. Wish me luck 🥹
Sorry to hear your having this problem, please share your experience under the pinned comment relating to this if you feel it could help others.
Thanks for watching, and all the best :)
That's what mine was doing so I looked at it very closely asni was attaching it and I found that there is a tiny little notch you need to line up on to the nozzle once they both line up u push it up as hard as you can until you hear a click.
Finally..... thank you❤
That is delightful, thanks Tyler.
This is the most informative and clear video I have found after searching over and over. THANK YOU so much! Can't wait to practice now. What size frothing pitcher are you using? Do you have a link?
Hi Marcia, thanks for your comment. I am using a 14oz pitcher, and yes there is a link in the description which should display a similar one on amazon if not the same. On this machine either a 12 or 14oz stainless steel pitcher will work best. Thanks for watching :)
@@tyler.martin Thanks! Sorry I overlooked that link. But thanks so much for still responding. Looking forward to more great videos!
Hello, I am having a
De’Longhi Dinamica ECAM 350.15.B
Which comes with a Panarello wand. I managed to buy and fit in a rubber attachement which is longer than the original one, so I can use it wihout the metal cap but I am still struggling with positioning my metal milk jug, bacuse the space is very limited. Can you please advise?
I have some pictures also, not sure how I can attach them here tough.
Thanks
I see, I'd maybe try coming in from the left side of the machine, with your pitcher spout pointing towards the right side of the machine. Point the steam wand in the center-left of the pitcher and tilt the pitcher back a little with the aim of creating an anti-clockwise vortex. Also,
only while steaming - I would also prop the left side of the machine up with a tea towel folded 5 times or an oven glove folded once, just to create more of an angle on the wand and therefore reduce how much angle I need to tilt the pitcher, you can see me doing this in my other videos, but the only difference in my circumstance is that I tilt the machine backwards. Lastly, using a small pitcher no larger than 400ml helps with limited space and weak steam output on some of these machine. I hope that helps and that you manage to create the necessary angle with your machine, best of luck.
@@tyler.martin thank you. I can also bring the wand to the left of the expresso machine (45 degrees) but I am not sure if that would help me. Is there anyway I can send you pictures to show you more precise my setup ?
@@tyler.martin I am not sure what you mean by this, in which video can I see it ? Thanks
( prop the left side of the machine up with a tea towel folded 5 times )
@@lupalb121 You can use whatever you want, obviously whatever is handy in the kitchen at the time to add more of an angle to the wand in an attempt to closer simulate a cafe machine wand vs a wand pointing directly down. It's not ideal having a locked position wand so it's just a little work around that makes a little difference.
You can see me adding some tilt here:
ruclips.net/video/UHK7vY4Pvjw/видео.html
and here: ruclips.net/video/ncQIFaSu0dQ/видео.html
I'm essentially placing something under the machine at an angle in the opposite direction to that which I am tilting the pitcher. I do this to compensate for the lack of angle on the wand on this machine. Typically a barista will have the wand at an angle of up to 45 degrees while stretching the milk. If you can't tilt the wand then hopefully this explains tilting the pitcher and the machine instead. The angle not only initially helps to induce a vortex sooner but also allows the steam break the surface of the milk in a way that induces microbubbles, like skimming across the top a little rather than plunging directly down into it making big bubbles. The sweet spot has to be discovered with your unique set up through experimentation, once you have the experience it all becomes very obvious what needs to happen. Keep researching and practicing.
@@lupalb121 No I do not currently have a public platform for you to send pictures.
If you can tilt to 45 degrees then stand with the tip of the wand towards you, pointing at you, and offer your pitcher up to the wand from there, and aim it at one of these points: ruclips.net/video/6LZ0XKgaPbM/видео.html
Great video I have the magnífica start and when I use these settings no coffee is extracted. Seems to only extract from around grind size 3? Also for oat milk would the same theory apply for stretching?
That sounds ok, it could just be that the grinder is more efficient or in better condition than the one in the machine I used, there are also other variables to factor in such as the physical attributes and condition of the beans used in each case, so the exact dial setting that works in each unique case will differ. If you get little to no flow, it's usually a result of compressing coffee that is ground too fine. So you adjust a notch less fine and reassess, remembering it will take 2-3 coffees to show the new results of each setting change. Start off fine and work your way towards coarse until you get a slow flow. The idea is to find a setting where the espresso flows out slowly, with a higher viscosity than the factory default watery shot. It's also important to remember that the exact settings required to achieve the ideal flow will vary slightly with each different batch of beans, so sometimes adjustments are required each time you add different beans. You can also experiment with turning the min/max dial on the face of the machine anti-clockwise slightly if you get no flow on the finer grind settings - as having a too much coffee ground up and compressed in the machine will also potentially restrict flow. It can also help to take the infuser out of the machine and clean it regularly for optimal flow, the instructions to do so are in the user manual.
Yes the same theory applies, aerate and emulsify. However if the liquid lacks the necessary macros/components such as protein and fats then the process will not occur exactly as shown, and the introduced air will not remain suspended for as long as intended. If you're not using diary milk then you can use barista formulated plant based milks to achieve similar results. Or with the addition of the necessary ingredients/macros you can adjust the chemistry of your chosen plant based milk yourself to have it more closely resemble that of diary milk.
@@tyler.martin great thanks a lot, great Information and a lot for me to be getting on with…Will try these tips out. Thanks again!
@@shahedsaffari365 You're welcome, all the best :)
@@tyler.martin one more thing. With my oar milk I am able to get super silky milk but only about 1/3 of the milk is like this, the rest is like it has not been worked. Is this cos I didn’t generate enough bubbles or work them in deep enough? Again thank you man - easily the best tutuorisls on RUclips for this 🤟🤟🤟
@@shahedsaffari365 In the case you have foam on the top and liquid on the bottom when using a milk that works, it could mean you haven't had a vortex from start to finish folding the air throughout the entire mixture, so it'll just sit on top, or you've steamed too hot and excessively broken down or denatured the proteins resulting in the air releasing.
However if you're not using diary, or a 'barista formulated' plant based milk specifically made for steaming then you'll work the small amount of reactive components available in the said liquid and get some result sat on the surface yes, but beneath that foam layer the majority of liquid will just be flat as if it hasn't been steamed. Remember it's just water with a very small percentage of oats, or almonds etc depending on what you use. So if you imagine steaming just water by itself, will steaming it achieve the desired creamy result? No because there isn't the necessary protein and fat etc. If I add an odd pinch of oats or almonds to that water and a drop of oil, will that result in creamy milk throughout, no. The ratios have to be right for it to work as intended. This is why there are barista formulated variations of plant based milks available specifically made for steaming, to closer resemble the results achieved with diary due to chemistry.
I'd say learn with a milk that is known to work so you can rule out the problem being the milk and know when you've mastered your technique, with that you can then have a solid base for comparison and be experienced enough to quickly recognise which milks work and which don't etc. All plant based formulations behave differently and you learn this best through hands on experience, much like skimmed dairy milk behaves differently compared to full cream diary because of the reduced fat content. There is behaving differently which results in you making minor corresponding tweaks to technique to achieve the desired result, and then there is just plain trying to make it work with something that just simply doesn't have the required chemistry. Protein and fat content are very important.
With the diagrams and everything... Man you could make this an app... Brilliant stuff. Couple of questions. Could you measure the exact amount of milk. In my pitcher I feel I really need to add quite some milk to get the steam wand to reach the surface. Secondly I'm getting this almost loud whistle... It fades one's I really insert the wand.... Any suggestions
Hi Mark, haha glad you liked it. As for the amount of milk, I fill to the 200ml mark in a 400ml pitcher (14oz). The steam pressure available is only really suitable for a single serve in my opinion.
I've not heard a whistle sound before but I would describe a very loud sound that gets produced as a screeching sound, and this will happen when there is insufficient air being drawn into the milk by the wand, it is only usually heard right at the beginning for a second, before stretching the milk.
First of all from what you've told me, I'd recommended acquiring a stainless steel pitcher of either 12oz or 14oz in capacity, so you can maneuver the wand to the necessary depths without any struggle. A larger pitcher will not work too well with this machine.
If you're experiencing the loud screeching sound for more than the first couple of seconds try following these instructions: First be sure to purge the steam wand for 10 seconds or so before beginning to steam the milk to ensure you've got a strong, steady flow of steam. Close the valve and immediately place your pitcher with 200ml milk under the steam wand, submerge the tip at least 1cm, then turn the valve open again to begin steaming the milk. Now, it will likely be loud at this step until you simply begin to lower your pitcher, just until the tip of the steam wand just about breaks the surface of the milk at an angle and injects air, while also promoting a vortex to form. At this point the screaming sound will be replaced with the sound of ripping paper as air enters and begins to produce microbubbles dampening the sound. After a few seconds of injecting air (stretching the milk) at this steam wand depth, you can then raise the pitcher up a little to submerge the wand about 1cm or so to continue spinning the milk without adding more air, stopping once the pitcher is too hot to touch for more than a second on the side. Be sure to have the pitcher angled as shown and described in the tutorial to maintain a vortex in the milk throughout the whole procedure. I hope that helps, best of luck :)
Huge help.....got rid of the whistle sound and now for a new pitcher.. 👍🏼
@@markpd81 Great :) glad to hear
This helped me for ages and my coffee has been great but lately the black part of the wand sometimes fire off and the foamy bubble bath is happening without the attachment anyway. I feel like something is wrong. It’s been descaled.
Hm interesting, and your technique, pitcher, volume of milk and type of milk hasn't changed?
As for the wand tip I talk a little about this in another video here: ruclips.net/video/JrFIIMIvD7g/видео.htmlfeature=shared&t=751
There's always a chance it can become loose and fire off under pressure but ensuring a secure fit by replacing the rubber o-ring with a tighter fit and not submerging the wand tip too deep while steaming shall prevent the scenario.
@@tyler.martin thanks. I will check that out. Nothing else has changed. I’m having to reduce my milk volume because it overflows before I reach temperature now. 😏
Can we get a better vortex if we drill two more holes into the end of the steam wand?
I know what you mean but no, I think that is unlikely to make a positive change with this machine and wand.
Beautiful explained!! Thank you!
хорошее видео
Спасибо
Great video thank you - can I ask the best milk to use with this kind of machine? Does it have to be full fat or can it manage to froth semi skimmed also?
Thanks in advance
Many find that cold full fat yields the best results. Skimmed and plant milks can certainly also work great too - Each milk type behaves differently when meeting steam. Gathering the experience of working with a variety of different milk types can help further establish your understanding and technique, in comparison to a reality wherein you have only ever learned to steam one type.
@@tyler.martin thank you very much, that’s great info
Wow, what an informative video. Thanks 👍
Thx.
Thanks for watching :)
Hi! What type of milk are you using to achieve this texture, besides the technique you used..? Because I’ve tried every kind of milk (normal/barista/without lactose, etc) and I still can’t really reach that smooth foamy texture for cappuccinos.
If you prefer dairy milk, a full-fat or full-cream milk straight out of the refrigerator will yield the best results for a smooth creamy texture. It has been the 'gold standard' around the world in cafes for a long time. Skimmed milk creates more of a 'foamy' volume, where as full cream milk, containing more cream, unsurprisingly creates that quintessential velvety volume, that marks a decent cappuccino. Though milk choice aside, technique is really important to achieve a decent cappuccino texture and volume, there's more than meets the eye and it only comes with practice and experience.
With this machine I find it helps to purge the steam wand for 10 seconds or so immediately prior to steaming to ensure a roaring steady flow of steam before introducing the milk. Maintain a vortex right from start to finish, skim the surface or 'stretch' the milk a fair bit at the start for a cappuccino, once it's spinning that is. You don't want still nor turbulent bubbling milk, clean smooth vortex only. Focus a lot on not making big bubbles, you only want lots and lots of micro bubbles that you can't even really see. What you will see though is the vortex climbing higher and higher in the pitcher as the volume increases. Ensure this new volume is worked throughout the mix by the vortex rather than just sat on top, finishing up with a good polish can help with this also.
To achieve similar results using a plant based milk, opt for a barista formulated blend, otherwise it won't foam well or at all. Also note that different types of plant/nut milks all behave differently when steamed, and then also each different brand too.
I can achieve similar looking results with any milk, or milk alternative - as long as it's formulated for purpose. When steaming each, it comes down to adjusting technique to suit the particular characteristics and behavior of each different type or brand.
You’re amazing 🤩 thank you sharing ☺️☺️
mine drops only hot water how can i make it drop steam?
In full working condition, this machine is capable of delivering both hot water, or steam from the steam wand. To deliver steam, you first have to press the steam function button before opening the wand valve, as shown at this point of the video: 12:29 . Once you are done steaming, first close the valve to stop the flow and then press the steam function button again to end the process.
Does froth have to be hot to make the hearts?
As far as I'm aware, it's not physically possible to achieve the desired texture for latte art without the milk being within a certain temperature range. Typically whenever you see latte art, it has been achieved by steaming the milk, to somewhere usually in the range of about 55 to 65 degrees Celsius. However, if you really want cold milk, you can kind of achieve something that resembles basic latte art if you froth cold fresh milk in a French press, or use an electric whisk, though it won't behave the same and will be far from ideal for pouring anything other than thick undefined shapes. Thanks for watching :)
Bro is majestic
I know I’m a bit late so I hope you still read the comments here. I have issues with phase 2. Phase one goes ok, I can do the micro bubbles but as soon as I want to submerge the wand a bit more, the milk starts to jump all over , and I can hear the sound changes completely as if it is too hot so it cannot be heated anymore. I think I’m doing phase one same time as you, not longer so not sure where I’m going wrong . Please help
I have some tips for you that could help in more detail below, but from what you've shared, I'd presume there is a lack of vortex speed from start to finish due to adjustments needed with the depth and angle at which you have the steam wand tip throughout.
If you're not already, I recommend only using a 14oz stainless steel pitcher with this machine while learning. No bigger, no smaller, and fill it about half way as shown.
Firstly when you turn the steam wand on in your milk, you need to make sure it has been purged for about 20 seconds and that it is delivering strong, steady steam right away once in the milk. This machine has a tendency to spit out water at the start and that is going to effect the process. Do that into an empty cup before transitioning the primed flow into the milk.
I remember mentioning in the video that the volume of the milk will increase as you stretch the milk, but I don't think I mentioned that you should account for this with your pitcher height. So as the milk 'grows' higher in the pitcher you should be lowering the pitcher height in sync with the surface of the milk to have the wand tip remain just below the surface and not too deep for phase 1. Personally I make adjustments to height and angle throughout by focusing on maintaining the speed of the vortex, watching the surface of the milk and newly created foam be pulled down and incorporated throughout the milk. If it is not doing this I adjust accordingly throughout. I simplified the process in this video for learning purposes, just to get it fairly straightforward and not too heavy in details, but in reality there isn't such a rigid phase 1 and 2 and the whole process is more fluid rather than robotic with set steps, you have to move with the milk throughout and adjust to what it is doing. It will never behave exactly the same every time.
So in short, in phase 1 you should be slowly lowering the pitcher as the volume increases to incorporate the newly formed foam into the vortex. If the vortex is slow adjust the height and or angle to maintain it's speed throughout. Also for best results it is important that you have a very steady hand, I often contact one of my hands against the machine behind the wand to stabilise the hold.
When you move to phase 2, I exaggerated it a bit in the video by the way to demonstrate the adjustment, so note that you don't want to go too deep with the wand, max 1cm. The idea is that during this stage of the process you don't want to be breaking the surface of the milk anymore, but you still want the tip near enough to the surface so that it continues to move the surface of the milk into the vortex.
Also another thing that I believe I didn't state in the video is that by the time you have reached phase 2, you can begin to tilt the pitcher more upright as once the vortex is spinning this tends to give it more speed and also prevents any overflowing or jumping of the milk from the now increased volume.
In short, during phase 2 you should only have the wand tip ever so slightly deeper than in phase 1 and can also have the tip more vertical than before, but not too straight down otherwise this will definitely cause the milk to jump and splash.
Don't be afraid of being near the surface in phase 2 just be very steady and mindful of not breaking the surface of the milk anymore, just that millimeter or so close enough to include the foam on the top into the vortex.
Focus on your wand tip depth and angle throughout, remember it needs to be adaptative rather then a set rigid depth, also again it's important to be maintaining a consistent vortex from start to finish, focusing on incorporating the newly created foam with a steady hand. All the best.
Thanks so much for this! I’ll try and see. To be honest, I did decal the machine 2 days ago and since then, I feel like the quality of the coffee has gone down and also , the milk froth er does not work as good(coffee has less cream)Like if it spouts more water during the process than steam. Is this possible? Also, I do use vegetable milk but barista one so it is almost as good as dairy one though of course, I never get as much cream as I know I can get with the dairy one .
I have the same machine, but my steaming makes sooo so so much noise, do you know why?
Yeah, you just need to lower your pitcher and inject some air at the start. After you open the steam valve and allow the steam into the milk, simply then begin to lower your pitcher until the tip of the steam wand just about breaks the surface of the milk, thus injecting air. At this point the screaming sound will be replaced with the sound of ripping paper. After a few seconds of injecting air (stretching the milk) you can then raise the pitcher back up a little to resubmerge the wand and finish the process. Be sure to have the pitcher angled as shown to maintain a vortex in the milk throughout all of this. Consider watching the tutorial from start to finish and you'll have a better understanding of it all. Best of luck :)
if i try taking the attachment off the nozzle just pops off during steaming....
I talk a little bit about this in part 2, always check the nozzle is firmly in place every time before steaming, clean and dry wand components will offer more grip to one another. Submerging the nozzle too deep in the milk increases the chance of it blowing off.
Hy, nice video! Type of milk matters?
Hi thanks, currently yes it does. If you prefer dairy milk, a full-cream milk will yield the best results for texture and pourability. Skimmed or low fat milks etc all behave differently but it still works. To achieve similar results using a plant based milk, opt for a barista formulated blend. These are specifically made for steaming. Note that different brands and different types of plant/nut milks all behave differently when steamed, so experiment with different formulas. Personally when steaming nut milks, the best results in both texture and taste I have achieved with them, has been when steaming barista formulated almond milks. This is including the latte art pourability.
Great video thanks for the explanation!
Thank you :)
when i remove steam wand attachments streamer fell down. any ideas how to avoid ?
I push the nozzle up firmly to check it is fixed in place before turning the steam wand on every time. Also make sure you're not submerging the tip of the wand too deep, it only needs to go a centimeter in. Doing so should avoid the pressure increasing, and then escaping out of the easiest place - the loose fitting.
Hey, loved the video. Can you please tell me what size of the milk pitcher you are using?
Hello :) Thanks, I'm glad it was of value to you. I am using a 14oz pitcher, or 400mL in metric.
@@tyler.martin Great, thanks. I found a 414ml stainless steel pitcher in a local shop for 5€ 😊
Perfect :) enjoy!
Hello! Great video! But a little question, how you obtain a consistent shot of espresso on this machine? A saw a lot of people say that the coffee produced from the Magnifica S is not stronger enough. I just sold my Delonghi Dedica and i want to buy a bean to cup machine because is more simple and fast. I practiced a lot of latte art with Dedica and i obtained great results but now i want a little change. If you can help me with some tips for a good espresso, I would be grateful.😊 keep up the good work!
Hi thanks for watching :) This is the trade off with opting for a convenience machine, with which you don't tamp your own puk. You have little control over the outcome, the shot is pulled within a few seconds. The odds are against you if you're hoping to pull a top quality shot.
However, I do have a little bit of a work around for you though - providing you're not too particular about the flavour profile and just looking for it to taste strong.
With this machine, to try pull a concentrated shot that somewhat resembles that delivered by a commercial machine in a cafe; I opt for a strong bean, set the machine to a fine grind on the dial in the bean tray, and max out the strength dial on the face of the machine. Finally I have the espresso volume dialed in to about 20ml delivery. I combine together two of these separate concentrated 20ml shots so that they form one potent shot of around 40ml, to which I add the steamed milk. The instructions on how to adjust the volume delivered by a particular function are within the user manual.
Now, using this method will not satisfy the tasting palate of a coffee connoisseur, due to the insufficient extraction of the full flavor profile. However it will ensure you do taste the coffee over the milk - while maintaining the low water to milk ratio required for many barista style drinks. You want a concentrated low volume shot, not a cup full of hot coffee water - particularly if you want to achieve any latte art.
@@tyler.martin thank you very much! I’m aware that the taste will not be comparable with a manual espresso machine never…but i want to extract maximul from the coffee. Thank you for the tips, i appreciate!😊
@@edibumbaru If you're interested, I do now have a full tutorial on how to adjust the settings to achieve a stronger coffee with this machine. ruclips.net/video/ncQIFaSu0dQ/видео.html
@@tyler.martin thank you, i will watch! In the end i went for a Philips 5400 lattego, because on black friday it was at a very good price in my country. 😁but is very helpfull anyway, because it is also an superautomatic espresso machine. I will try to make latte art with a french press, i hope i succeed😂 thank you very much, i appreciate mate!☕️
nice one brother
Thanks for watching :)
How to do a good coffe with magnifica s?
If you have the same machine as shown you can adjust the settings as shown in my other video here: ruclips.net/video/ncQIFaSu0dQ/видео.html
Once you have improved the 'espresso' and it is about 30ml or so in volume, you just steam milk as shown in this video and then pour it into the espresso to combine the milk and coffee.
What size milk jug (ie how many ml) is this please?
Hi, the milk pitcher shown has a capacity of 400ml :)