2022 CIvic Si PRL Resonator Delete Kit install!!

Поделиться
HTML-код
  • Опубликовано: 28 авг 2024
  • (This install is on all 1.5T civic cars.)
    If I say theres a 10, I mean a 10 mm bolt my bad new to this !
    *PLEASE NOTE*
    --I said there's not prongs on the rear emblem but there is.
    --I found there to be more than 10 bumper clips to remove on the bottom}
    --You cant really hear the turbo noise on video, but in-car driving you can!
    --I said sorry a lot and I talk low LOL!
    PLEASE LET ME KNOW IF I FORGOT ANYTHING OR YOU HAVE ANY QUESTIONS NEEDING ANSWERS!
    Instagram: SSGKeo

Комментарии • 75

  • @Xena69
    @Xena69 Год назад +8

    Hey we just did this and you don’t need to take the front bumper off just the wheel well on the right said I did it by taking like 10 clips off and came off very easily! Hope this helps.

    • @SSGKeo
      @SSGKeo  Год назад +3

      Yeah! everyone says that. I was just used to taking off my bumper for more clearance but either way is correct :)

  • @wrinklybird6395
    @wrinklybird6395 2 года назад +7

    bro please get the prl stage 1. i think the resonator delete and the new intake pipe and filter will sound amazing.

    • @SSGKeo
      @SSGKeo  2 года назад +3

      I messaged PRL and its just a few more months until the full cold air intake! I'd rather have that than a small hose upgrade tbh lol.

  • @axionind
    @axionind 2 года назад +9

    You need any parts look us up, car looks great

  • @longANDmason
    @longANDmason 2 года назад +7

    Yeah, the PRL installation guide wasn't 100% with all the things that needed to be done to take out the bumper and resonators.
    Removing and installing the bottom resonator was easy but I'm still struggling with taking off the top resonator, do you have any tips on getting it out?

    • @SSGKeo
      @SSGKeo  2 года назад

      Yeah I tried to copy the file as close as I can. Once you removed the bolts. Keep wiggling all over. And I mean up. Down. Left right. You’ll see it get more loose. Then I pretty much pushed it all the way right to pop it open

  • @NurseBones
    @NurseBones Год назад +4

    I bought this delete kit for my 23 Integra. Same car just way nicer emblems lol. I received zero instructions on the install. I asked PRL if this delete kit would help hear the stock blowoff valve. They told me that it would. After watching your video, clearly you still can’t hear any sort of blowoff so complete waste of $29.99 😂

    • @CivEtzio
      @CivEtzio 11 месяцев назад

      It’s because you need their stage 1 intake for it the resonator delete is just for your car to make more sound

    • @NurseBones
      @NurseBones 11 месяцев назад

      Yeah once everything was installed I definitely hear it. I was saying in this video you can’t hear it. I have cold air intake, upgraded intercooler, charge pipe, front pipe, Remark exhaust, turbo blanket, rear engine mount, resonator delete, and the Hondata ECU upgrade for the 23 Integra. It moves a lot better now 😂

    • @adventsociety5382
      @adventsociety5382 11 месяцев назад

      ⁠@@NurseBonesCVT or 6MT? I hear CVT starts to overheat around 250-265 at the wheel. Maybe even before that. Any dyno?
      I have a 23 teggy CVT and planned to do all the same mods you’ve listed but thinking I should trade it in for the 6speed.

    • @NurseBones
      @NurseBones 9 месяцев назад

      @@adventsociety5382@adventsociety5382 6MT. I have no overheating issues, even in the extreme heat of South Florida. I have not had the chance to dyno it yet, but it's safe to say it's pushing 300 with the Hondata ECU upgrade. I can easily beat WRXs and keep up with STis. Also, an update: The cold weather I got the other day was a game-changer! My car had noticeably more power with the cold air going through the cold air intake lol. My car is a beast and I would love to find someone with a type S to race

  • @MrShowboy1
    @MrShowboy1 2 года назад +7

    There was no need to take off the bumper lol just needed to take out the two screws on the driver side fender well then there’s 2 clips and a 10mm you take out under the car and you can pull the fender well off giving you access to the resonator and pull it out right from under there and then get you a vacuum cap to plug that hole the resonator left no need to spend $30 on the prl delete kit 😂

  • @beneful209
    @beneful209 2 года назад +4

    Ol boy still got the plastic on the seat

  • @vqRob
    @vqRob 2 года назад +1

    can't wait for the single exit exhaust they made to drop

    • @SSGKeo
      @SSGKeo  2 года назад +3

      Ugh I hate that’s it’s single lol. I saw it from PRL. I want a smaller exit but dual

    • @vqRob
      @vqRob 2 года назад

      @@SSGKeo idk why people hate on single exit ur not gonna get more volume out of ur turbo then going single + the resonator they provide makes it quiter then most Honda aftermarket exhaust from the last generation also they are gonna provide a bumper insert to hide the other spot where the exhaust should be too Brap cans underrated

    • @SSGKeo
      @SSGKeo  2 года назад +2

      @@vqRob I don’t hate it. It’s just the way the bumper alresdy is a cut for two exhausts. Would bother me having one

    • @vqRob
      @vqRob 2 года назад +1

      @@SSGKeo yeah that's why with the exhaust comes a insert to make the bumper flush an not look like it was made for dual

    • @adventsociety5382
      @adventsociety5382 11 месяцев назад

      People hate on single exit because it’s ugly, hurts performance, and most examples on the road are just ricers who want to be heard. But that’s why you don’t worry about what other people think ❤️

  • @luisescajeda1202
    @luisescajeda1202 4 месяца назад

    Do I need the plug kit if I just want a cold air intake?

  • @Will40th
    @Will40th 2 года назад +2

    I wonder how straight pipe sounds

    • @SSGKeo
      @SSGKeo  2 года назад +2

      I’ve never done a straight pipe. Usually exhaust whenever it comes out

  • @MadCapMoto
    @MadCapMoto Год назад

    Hey when I got this installed I got every warning light possible. My auto rev match and lane keep asist are off too.

    • @SSGKeo
      @SSGKeo  Год назад

      Mine was the same. I drove it and it was fine after a while. Or if you hav ktuner you can disable CEL light

    • @MadCapMoto
      @MadCapMoto Год назад

      Update: after I drove it a few times it worked it’s kinks out. All good now. Thanks for the reply

    • @SSGKeo
      @SSGKeo  Год назад

      @@MadCapMoto no problem glad you got it to work!

  • @abel3619
    @abel3619 Год назад

    Just did an exhaust resonator delete, will be getting the prl short ram intake, should I delete the intake resonator? Would it even make a difference or am I wasting money?

    • @SSGKeo
      @SSGKeo  Год назад

      I think you need to delete the intake resonator for the room underneath. I could be wrong I haven’t installed the short ram. Some intakes require the intake res delete

    • @abel3619
      @abel3619 Год назад +1

      @@SSGKeo yea ik the hvi needs that but I think the short ram doesn’t

  • @timothypauljohnson
    @timothypauljohnson 2 года назад

    How difficult was the front bumper removal?

    • @SSGKeo
      @SSGKeo  2 года назад

      To some it may be difficult cause they’re scared of the bumper breaking. Idk why. But it’s all mostly bumper clips. Especially the bottom. So first time maybe hard. Took me a few mins and afterwards it just comes off easily

  • @SSGKeo
    @SSGKeo  2 года назад +1

    Jump to 3:00 for install

  • @dariancorlette4212
    @dariancorlette4212 2 года назад +2

    Did you order the car?

    • @SSGKeo
      @SSGKeo  2 года назад +2

      Yeah I inquired back in November

    • @dariancorlette4212
      @dariancorlette4212 2 года назад +1

      So it only took 3 months??

    • @SSGKeo
      @SSGKeo  2 года назад +2

      @@dariancorlette4212 ordered and it finished getting built november 27th. I actually got delivery of it on Dec 21st

    • @dariancorlette4212
      @dariancorlette4212 2 года назад +1

      Oh so it was quick ! Thanks !

    • @TheRockford22
      @TheRockford22 2 года назад +1

      @@dariancorlette4212 ordered mine in December and expected delivery is February-March so it’s not to bad compared to some vehicles on the market.

  • @cristianborrageiros1135
    @cristianborrageiros1135 Год назад

    Did you notice and MPGs change?

    • @SSGKeo
      @SSGKeo  Год назад +1

      Honestly still getting great mpg. I drive three hours somewhere and still have a little over half a tank left

    • @MadCapMoto
      @MadCapMoto Год назад

      No honestly it’s the same. Maybe a smidge worse but not noticeable

  • @brandonbui9628
    @brandonbui9628 2 года назад

    Where did u buy the red Honda emblems

    • @SSGKeo
      @SSGKeo  2 года назад

      The ones I bought are sold out on eBay. From my understanding in the Facebook group, 10th gen emblems work as well

  • @Rob-sy1ed
    @Rob-sy1ed 2 года назад +1

    How did you remove the bumper, specially near the headlight

    • @SSGKeo
      @SSGKeo  2 года назад +2

      Once you remove all clips shown, its going to feel real tight (thats what she said) where the bumper and headlight meet. I pulled the side easily, reached my arm in and pushed it out towards me and pulling on it.

  • @1cecreampize197
    @1cecreampize197 2 года назад +1

    is there tutorial

    • @SSGKeo
      @SSGKeo  2 года назад

      This video is all I have closest to a tutorial. Its fairly easy to follow and instructions on PRL site too

    • @1cecreampize197
      @1cecreampize197 2 года назад

      @@SSGKeo is it a must to take off bumper?

    • @SSGKeo
      @SSGKeo  2 года назад

      @@1cecreampize197 No. You can remove the driver side fender liner, pull it back behind the wheel and work it from there

  • @kevintoral4485
    @kevintoral4485 2 года назад

    Does this increase horsepower??

    • @SSGKeo
      @SSGKeo  2 года назад +1

      No. Supposed increases airflow

  • @SWEETVENOM100
    @SWEETVENOM100 2 года назад

    Where do you recommend buying a Ktuner? I have the exact same car

    • @Aerospacegod
      @Aerospacegod 2 года назад

      Go to two step performance

    • @SWEETVENOM100
      @SWEETVENOM100 2 года назад

      @@Aerospacegod cheers but I ended up buying from axionindustries right after. I should have honestly bought locally in Canada because the duties are goons here 💩

  • @matthewarjoonsingh1307
    @matthewarjoonsingh1307 2 года назад

    Whered u purchase the red emblem?

    • @SSGKeo
      @SSGKeo  2 года назад

      It’s sold out but apparently 10th gen works also

  • @dylanwelsford6391
    @dylanwelsford6391 Год назад +1

    There are a few cons to removing the resonator 1) your going to lose that deep rumble especially at lower speeds 2) you hear high pitch induction noises (not the nice classic turbo but more like an annoying whine) 3) you offsetting the balance of the front end. The reason this was put in that location was to counter balance the windshield washer reservoir 4) your going to lose HP 5) you may see a small drop in full efficiency 6) you may void your warranty and have a lame sounding car. Go from Civic Si to Honda Odyssey sounding Si

    • @SSGKeo
      @SSGKeo  Год назад +2

      was this a late April fools joke.

    • @its_Obsidian
      @its_Obsidian 7 месяцев назад

      I’ve had several warranty claims done on my 22 so far (drive train included) and have had 0 issues with having my resonator deleted.

    • @Stuckinthepast_
      @Stuckinthepast_ 26 дней назад

      This guy probably doesn’t even own a 11 gen si 😂

  • @BkBk-gy6vr
    @BkBk-gy6vr 2 года назад

    Resonater delete thats smart, you just lost HP to make your muffler louder.

    • @SSGKeo
      @SSGKeo  2 года назад +3

      Show me the stats until then you just typing.

    • @BkBk-gy6vr
      @BkBk-gy6vr 2 года назад

      @@SSGKeo Im a mechanic dont need stats. You would know it lowers Hp if you knew what a resonater was used for.

    • @SSGKeo
      @SSGKeo  2 года назад +4

      @@BkBk-gy6vr lol it’s the intake resonator. Not the exhaust resonator. All I did was remove extra plastic that made no difference in noise. But everyone’s a mechanic online right ?

    • @bakerloks3821
      @bakerloks3821 2 года назад +5

      You must be a pep boys mechanic sir. Karen’s always seem to pop out acting like they know everything. Damn RUclips mechanics 🤓I’m the president of Mexico 🇲🇽

    • @BkBk-gy6vr
      @BkBk-gy6vr 2 года назад

      @@SSGKeo Correct the intake will make you lose HP

  • @francoismarcil9242
    @francoismarcil9242 2 года назад

    Clutch slipping 10.44 lol.

    • @SSGKeo
      @SSGKeo  2 года назад +1

      Nah didn’t slip. Just my mistake. Wasn’t used to a very light clutch. I came from a heavy clutch lol

    • @francoismarcil9242
      @francoismarcil9242 2 года назад +3

      @@SSGKeo yah new 1.5t clutch are high and light no feel in pedal