I think for the next challenge, you should SATURATE the first 20 feet, and the last 20 feet using the oil machine on one lane, and reverse the order on the other lane (first 20 and last 20 bone dry)
@@BigMikeBazilI know this past year it was projected onto the floor. I think they did have colored oil for a few years though. I remember hearing them say something negative about the colored oil
That would be awesome! The new shows it’s projected the old shows it was color, the problem is the oil is sooo soo thin that the actual patterns all kinda look similar when in reality they are very very different!
Zach's back !! This "should" be a good one 😆. With predictable lanes this time ... Somewhat ! Zach knows it's a wash out 😆. Packy with the comeback clutch win !! Great video. Future challenge maybe ... and I've seen people do this ... pick the 7-10 out of a full rack.
4:12 This left lane is hard... I might have underestimated how hard it is. Me and Micheal at the same time: *T H A T S W H A T S H E S A I D !! --- (me): J I N X !!* 😂😂😂
Last week we accidently made a hardest shot on the left lane. We put out "bat" pattern for some practice games but there was an issue. The oil machine had a bad tank and a good tank. The kid that oiled it didn't realize it had a bad tank and oiled lane one with it. When it was complete on lane one the proprietor then told him it was bad and switched tanks and put bat on lane two. We walked down and looked back at the pair. Lane one basically oiled every other board. Just random boards were oiled and the rest were stripped bare.
You should have just pulled KOSI up on the computer and created your difficult pattern on there. You could have easily produced something WAY more brutal going that route. Done it multiple times myself for special tournaments where brutal lane conditions were the goal/advertised on the fliers. As a pinsetter mechanic/lane man, I find joy watching bowlers struggle/want to die inside every now and then. 😂😂 Nonetheless, great video! Always love your content.
I don't have a single joke that Red Green hasn't used while at the Otter Lodge. I'm from Western NYS grew up watching a ton of Canadian television. Tom Green love him or hate him did an interview on the radio in Rochester 20 years ago at least naming off various places that had commercials on out local airwaves. I'm a life long Leafs fan amongst Sabres loyalist!
"an hour north of toronto" lmfao. as someone from the same city, this is how we tell people where we are from, we dont say "Barrie" because its nothing to be proud of XD
the hard lane in this video is how my league lays down there house pattern. they say they dont lay it down that way but the ball motion from mine and everyone ball says otherwise.
Can anyone give me advice on how to explain to a bowling shop worker how to drill an oval thumb? I got into bowling years ago with my dad as a hobby and love it but my old ball got destroyed in a flood and cracked so I couldn't keep it for reference. I havent bowled in a few years in leagues and bought a new ball but the thumb is always wrong even now. I litterally have to put like 5 pieces of tape just to hold the ball and even then when my hand sweats I just start dropping it. My thumb is an odd oval shape and even when I explain this to the bowling shop worker and they say they understand they just make it worse. Any advice on how to get my ball drilled right? I've tried multiple shops and they all get it wrong.
Well you'd have to visit someone then with more experience in drilling oval. The technique itself is quite finicky to say the least and requires a real understanding of applying anatomical measurements to 3 dimensions and being slightly off makes it really OFF. Speaking of 3... When drilling oval thumbs its often used with 3 different drill bits. Even good ball drillers should have a hard time its not something common and is definately a niche within ball drilling because we now have inserts and tape to make up for anatomical differences mostly. If you can, might i make a suggestion if you have anyone experienced or yourself in 3d printing. You could make an insert for ie a jopro thumb slug that you would then insert into the slug and glue it. Good thing about this its very cheap and cost effective and making adjustments to "get it right" will be dirt cheap and quite easy. I've read about some having great success doing this instead.
do a ramp challange...you bowl using only the assistance ramps. (you might call them something esle...the dino things in the middle of the lanes or the taller ones for adults)
You should bring in a pba pro that didn't go to Wichita state and bowl on the insanity coach V and L put out for tryouts lol. Worst 3 weeks of my bowling life every year 😂😂
That was fun.... BUT to make the hardest lane, Packy should have oiled Zach's side and Zach oiled Packy's side... then the lane would have been the hardest lane ever. Thank you for the entertaining 20 minutes.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
you have to have Zach on more episodes he seems a genuine person and he has good personality and humor
I think for the next challenge, you should SATURATE the first 20 feet, and the last 20 feet using the oil machine on one lane, and reverse the order on the other lane (first 20 and last 20 bone dry)
Could it be possible to add coloring to the oil like on tour when you do these videos?
Is it color in the oil or is it like on football games where they have it showing on TV
I wish the oil just always had color at all bowling alleys. It’d be so nice.
@@BigMikeBazilI know this past year it was projected onto the floor. I think they did have colored oil for a few years though. I remember hearing them say something negative about the colored oil
That would be awesome!
The new shows it’s projected the old shows it was color, the problem is the oil is sooo soo thin that the actual patterns all kinda look similar when in reality they are very very different!
@@RyanBischoffPercussion don’t we all but then it would be too easy. They don’t have color during qualifiers for a reason, only on TV for the viewers
14:24 are you Roy Kent, Packy??? Haha
Zach's back !! This "should" be a good one 😆. With predictable lanes this time ... Somewhat ! Zach knows it's a wash out 😆. Packy with the comeback clutch win !! Great video. Future challenge maybe ... and I've seen people do this ... pick the 7-10 out of a full rack.
Ball soup. Reminds of a humid Florida summer
Packy: That split is the easiest split in bowling.
*minutes later*
Packy: That baby split is the hardest.
That’s the hardest split in bowling I’d rather throw at the 7-10
16:02 packy your hilarious dude 😂😂😂
Packy Da Goat
Zach! My 3rd favorite Canadian bowler!! I'm like the 80,000 best bowler in Canada. Pretty Okayist.
Good stuff fellas!!
4:12 This left lane is hard... I might have underestimated how hard it is.
Me and Micheal at the same time: *T H A T S W H A T S H E S A I D !! --- (me): J I N X !!* 😂😂😂
Last week we accidently made a hardest shot on the left lane. We put out "bat" pattern for some practice games but there was an issue. The oil machine had a bad tank and a good tank. The kid that oiled it didn't realize it had a bad tank and oiled lane one with it. When it was complete on lane one the proprietor then told him it was bad and switched tanks and put bat on lane two. We walked down and looked back at the pair. Lane one basically oiled every other board. Just random boards were oiled and the rest were stripped bare.
Just picked up a 7.5 degrees shirt for my Tuesday night league. Thanks for the video.
You should have just pulled KOSI up on the computer and created your difficult pattern on there. You could have easily produced something WAY more brutal going that route. Done it multiple times myself for special tournaments where brutal lane conditions were the goal/advertised on the fliers. As a pinsetter mechanic/lane man, I find joy watching bowlers struggle/want to die inside every now and then. 😂😂 Nonetheless, great video! Always love your content.
Hey! I love watching your videos! It makes me feel like im bowling even though im not😂
I have the same hoodie matt was wearing in this video
We need Zach in more videos! Y’all’s chemistry is awesome! Super entertaining to watch!
Zach was way different on here than I imagined he would be. It was good to see this side of him!
I don't have a single joke that Red Green hasn't used while at the Otter Lodge. I'm from Western NYS grew up watching a ton of Canadian television. Tom Green love him or hate him did an interview on the radio in Rochester 20 years ago at least naming off various places that had commercials on out local airwaves. I'm a life long Leafs fan amongst Sabres loyalist!
I have played on slapshot before (no oil in the middle and oil on the edges), it was definitely the hardest condition I've bowled on
Amazing video love bug
Ayoo
Genuinely hope to see a lot of Effect Tour use on Tour this year. It's so ridiculously good at everything it does.
I loooove that ball!
@ Saaaaaaaaaaaaaame
"an hour north of toronto" lmfao. as someone from the same city, this is how we tell people where we are from, we dont say "Barrie" because its nothing to be proud of XD
NOT A SPLIT ZACK! The head pin is up!!!!
Love the vid
We love that you loved the video 😁
You know how Zach pronounces tour? "Two-er" 😂
Doesn’t everyone?-
That's how golf people pronounce it to.
@@Nosa_or_NoXaother sports and like music tours. Are typically pronounced like "tor"
@@drumlineguy3No way bro that's wack
@@drumlineguy3 I can see how people say it like that but what is a “golf person”?
Shout out to the camera man!!!!
Go Dodgers!!!!!
8:00 can we get that 7 pin stood back up please
Zac is one of my favorite bowlers. Can't wait to see more of him on TV and winning titles. That guy can roll em with the best.
Office plug 👌🏾
You guys should bowl on the 2024 spray and pray pattern
I have seen it lol
Zach choked as bad as the leafs in the first round 🎉
👀
Somebody sign Zach!!
I love the vodioes i hope you counitione doing great
The ol’ “reverse block” oil pattern
I have not bowled in years but is using both hands the new thing?
Baby Split ... dooo doo doo do do do ......
"... and for that we are giving him absolutely nothing"
Packy I have a vid idea for new bowlers, like me.
Explain what different balls are, their coverstock, hook potential, etc. and show how they react!
Those mini golf holes that have a hill where the hole is makes me crash out fr😂
I think this is only like my 6th time seeing Packy win😂
Cool video talk tech bowling ball open bowling packy
If I've learned anything from this video, it's that the phrase "time to shine" should officially be banned from your vocabulary
the hard lane in this video is how my league lays down there house pattern. they say they dont lay it down that way but the ball motion from mine and everyone ball says otherwise.
Packy is going to have to win a few more titles to pay his guests on these types of videos!
2:25 yea.. why would you do your own side of the lane?.. lets see a series where you guys oil each others side of the lane.
Can anyone give me advice on how to explain to a bowling shop worker how to drill an oval thumb? I got into bowling years ago with my dad as a hobby and love it but my old ball got destroyed in a flood and cracked so I couldn't keep it for reference. I havent bowled in a few years in leagues and bought a new ball but the thumb is always wrong even now. I litterally have to put like 5 pieces of tape just to hold the ball and even then when my hand sweats I just start dropping it. My thumb is an odd oval shape and even when I explain this to the bowling shop worker and they say they understand they just make it worse. Any advice on how to get my ball drilled right? I've tried multiple shops and they all get it wrong.
I would go to a knowledgeable shop!
Well you'd have to visit someone then with more experience in drilling oval. The technique itself is quite finicky to say the least and requires a real understanding of applying anatomical measurements to 3 dimensions and being slightly off makes it really OFF. Speaking of 3... When drilling oval thumbs its often used with 3 different drill bits. Even good ball drillers should have a hard time its not something common and is definately a niche within ball drilling because we now have inserts and tape to make up for anatomical differences mostly.
If you can, might i make a suggestion if you have anyone experienced or yourself in 3d printing. You could make an insert for ie a jopro thumb slug that you would then insert into the slug and glue it. Good thing about this its very cheap and cost effective and making adjustments to "get it right" will be dirt cheap and quite easy. I've read about some having great success doing this instead.
"And this is the easiest split in bowling," which is why I missed the 3-10 in league tonight. Literally wrapped the 3 around the 10.
do a ramp challange...you bowl using only the assistance ramps. (you might call them something esle...the dino things in the middle of the lanes or the taller ones for adults)
Even though I know Canadians don't exist, that hallucination was really nice.
Hey if it has the head pin it’s not a split🤷♂️
You should bring in a pba pro that didn't go to Wichita state and bowl on the insanity coach V and L put out for tryouts lol. Worst 3 weeks of my bowling life every year 😂😂
Packy made me a better bowler!
What state do you live
Great watch. Hey Zach, excited a-boot Canada becoming our 51st? Good deal, eh?
That was fun.... BUT to make the hardest lane, Packy should have oiled Zach's side and Zach oiled Packy's side... then the lane would have been the hardest lane ever. Thank you for the entertaining 20 minutes.
Why wouldn’t yall mess up each others side?
Just make out own sides challenging for the fun of the video!
Apparently Packy hasn't oiled another man's side for weeks.
Instructions unclear, i have 4 liters of hammer effect tours and preorded valvolines newest synthetic oil
Packy I also sent you a challenge so whenever you can give it a read lol. And you can still win these challenges
We are in contact 👀
Packy! My ten year old asked me to replay the office reference
Imagine if you guys actually bowled with soup
Idk no what to do I have been bowling two handed for all my life but I kinda want to switch to one handed so help me out pls also I am left handed
Packy, u can't mention Freddie's name and not strike! Bro, what u thinking!! 🤣😂
When the camera is to the left of zach, it 100% looks like he's throwing a backup ball. It messes with my brain.
😂😂
Reverse block... even tougher than the old Amendment 4 shot!
The hardest lane to bowl on would be real wood lanes completely stripped 😅
Is that guy like 5'4"?! 😂
Valve-lean give us the motor oil on a bowling lane video please
👀
Dirty black oil or fresh new oil. I doubt a bowling alley would allow the dirty engine oil
12:35 erm
Yo Zach, did you go see Marianas Trench on their tour?
The guy in black is 4ft tall?
Packy should have jacked up the right side and Wilkins the left... that would've made more sense to me
More like Hammer Defect Tour
WSGGGGGGG
8th best player in the world maybe 8th joke as a pro in the world
That dude is like 4 ft nothin
Omg!
Did you say it’s not technically a split? It’s not a split in anyway period.
can someone explain what an 8 bagger is technically? rather new to bowling lingo lol
How many war crimes did you commit?😂😂😂😂
super cool bowling shoes zach has. my name is also zack but spelling it zach is odd lmao.
Who paid to fix that lane to fix it???
Owt
Real bowlers change their own oil.
Zack Wilkins 8th best bowler in the world? Now I know Packy’s full of 💩
According to the PBA points list he was!
@ yea but packy said to roast him
First
Les go
Zach is a frog
I'm a simple man. I see a Zach Wilkins video, I click
Bowlers are weird!
Two-handers are a joke.
Getting eighth in points doesn’t make you the eighth best player in the world.
I can’t believe you mentioned Freddie Freeman And not Raphael Devers 🥎 Go Sox