*Is the dji mic 1 better than the mic 2 for live streaming because the mic 2 has flat sound?* *is there audio profiles on the mic 2 for non flat audio?*
@@Fredo.heavyy is there multiple sound profiles you can choose from? Did a firmware update fix that problem where both mic 2 transmitters don't sound the same?
There is not a selectable audio profile for the DJI Mic 2 system. My original unit didn’t have any difference in sound on the mics so I can’t speak on that.
i can confirm thst the audio is the same. the problem commonly reported is that mic 2 used as standalone records way lower than when connected to pocket cam 3. turning up gain etc does not solve it. never found a solution for it.
Just a heads up DJI released new firmware earlier today (01-31-2024)... default setting is still for 'Low Cut' filter is 'ON' for this firmware as well....though I think it sounds better with newer firmware release and I'm not really noticing a difference between this filter being ON or OFF (at least not to my ear).
Hi..I am a stand up comedian and I am havin g a hard time setting my DJI Mic 2 to my needs. I need my voice but also record the audiences laughter... My sound is quite clear im the recording but I think the laughs are not as loud as it should be. Can you plz help recommmend the ideal setting for doing standups?? Thx u very much ❤❤❤
That's a a tough environment because levels are gonna be all over the place but I'll try to explain. The closer "source" to the mic is going to get those most isolation, so you have to pick one or the other (your voice or the crowd) What you can do is point the mic (capsule down) towards the floor and pick up all the sound in a more "even" capacity. Also make sure Noise Canceling is OFF and Low cut filter is OFF. A real solution would be to record a second track with a mic facing the crowd and then mixing the audio in post but that's Movie levels of production work.
@@Fredo.heavyy hey Man, I really appreciate you taking the time to help me out. I’m a fan of your channel and really enjoy your videos. I will try your suggestions. Again I really appreciate it. Thank you very much. It was nice talking to you.
Fredo! I liked & subscribed!!! I had muffled audio last night and had to reshoot tonight. You actually helped me a lot! I liked & subbed! Btw, on my Fx3, it seems like it’s almost using camera audio and you can hear cop sirens (live in LA, Venice beach) and even the dripping from the hose in the background It’s terrible. That’s NOT subjective 😂 Can I fix the crappy muffled audio and all this crazy background noise? PS I already used the “vocal isolation AI” feature in resolve. I just need to clean this up… Thanks dude.
@SotirisMoraitis92 iPhone are a little tricky when using the adapter (usb c or lighting) Depending on what app you’re recoding on the audio might not work correctly. I’ve used the black magic camera app and manually selected the DJI mic
This was great! This helped me a lot, because I really was feeling that Mic 2 had a muffled sounds in my videos. Great channel you have here! Thanks for all the tips, I’ll come here often! Cheers from Lisbon, Portugal
Thank you so much bro! Just subscribed to your channel! I've heard from someone else that the audio was " muffled" but to be honest I never noticed. But I'm changing the low cut filter off.
Hey Fredo... Love Ur content from India. • What should be the ideal gain levels for 'RECEIVER' & 'TRANSMITTERS' when we connect them to Android device !? • By the way I've bought DJI MIC 2 after watching videos. 😊
Hey man! Love your content! As a fellow videographer, audio monitoring is key for me. I've been trying to connect my DJI Pocket 3 or DJI Mic 2 to my bone conduction headphones via Bluetooth while recording for wireless audio monitoring. I've asked around on RUclips and the DJI forum but no luck so far. Any chance you could share a wireless solution? Thanks a bunch!...... really appreciate your help here...
Not sure that Bluetooth monitoring is possible. My understanding is that the Bluetooth connection is reserved for the mic unit to send m audio to (iPhone, action cam, laptop etc). What documentation have you read that says you can monitor via Bluetooth headphones?
Yeah I did that right when I got mine . What's also crazy is I've watched tons of videos and people are saying the rode wireless pros sound better and while they are clearer when outside they pick up more noise surrounding the person speaking . The DJI picks up and separates the audio of the person speaking better that the rode wireless pros .
you can get away with 24bit as long as you're not "peaking" screaming. 32 bit float is better for removing sounds that might be too low or high. I record everything in 32bit float if possible.
Make sure you have the gain set appropriately and record and 32bit float. I haven’t experienced any noise or static in my recordings, it honestly provides some of the cleanest audio for me.
Some people are claiming dji mic 2 has issues with third party lav microphones. Do you think that's true? I had to use the sennheiser g4 system on a shoot and it was so much fun using those that I never want to use them again. The dji mic 2 seems like an amazing replacement for such a system, but for professional use cases I need to hide the mic with an external lav. Also some forums claim the dji mic 1 has a loud noise floor/ 'isn't very quiet' compared to the sennheisers. Do you think they've improved the noise floor on the mic 2?
The DJI Mic 2 does have limited compatibility when it comes to Lav mics DJI did this on purpose so you’re more likely to buy their Lav, which does sound good from what I’ve heard. If you’re hiding the transmitter and already have a collection of Lav w/ locking connector then Rode Pro might be for you Also I haven’t found any issue with noise floor on the DJI Mic 2 w/ 32 bit audio float
@@Fredo.heavyy Thanks! I don't have any lavs let alone locking ones. What does limited compatibility mean? I'm fairly sure on any other wireless lav system the transmitters accept basically any microphone input.
@@definingslawek4731 I believe that as long as you use lav mics that use TRS connections instead of TRRS connections you should be fine, I'm gonna actually test mine later today or these next couple days. I have a couple Saramonics ones that I try.
I'm finding out that the DJI Mic 2 I have is not recording on my phone via the USB in. I have a Samsung A32. I'm wondering if I need a newer phone? Thanks for any help.
Turning off the low cut along with the noise canceling was the first thing I turned of after doing the firs test when I got it, I were shocked hearing the bad results till I found it in the menu and turned those off.
Great video! It happened to record and mono is there a way to separate the two receivers onto separate audio channels, or are they baked in to the footage for good?
I’m sorry if this is a stupid question, but I’m still new to the recording/editing process, on your video when it changes to “DJI Mic 2 EQ Applied” is the EQ what you’ve done in post, or some settings you’ve made internally on the mics? I “upgraded” from some cheap Amazon wireless lav mics to the DJI mic 2, but ever since my sound quality is horrible. If I record with one mic it sounds decent, but as soon as I turn on the second everything gets hollow and tinny. Unless I can figure out how to fix this issue, my $30 mics are working better for me right now. Appreciate your video!
Sorry I sent this question before the video was over, I’ll check out the other video regarding the EQ and see if I can fix anything. Thanks again, this was a really good video!
Hi ! enjoyed your video.. I need your advice. I have the DJI wireless mic 2. I have the transmitter and receiver set to +9 gain...low cut -0ff. I am recording on my Iphone 12. however when i put that video in Filmora... the audio from the iphone video is low and cannot be raise much at all.. any help would be appreciated. Rico
@@Fredo.heavyy I use Davinci resolve for the videos and, when needed, Logic Pro for the audio. I’m also a musician with experience in sound production and live sound. Any audio that is muddied or muffled, whether live or recorded, gets a low cut filter first of all. The bass and sub-bass frequencies of the voice are the main culprits for decreasing clarity of the audio. As well as using up valuable headroom, for no audible benefit. (You can’t have the volume as loud, if inaudible rumbles are eating up your bandwidth). I’m not saying that there aren’t differences or that the microphone doesn’t need EQ in post. I use EQ‘ing on vocal tracks recorded with high quality condenser mics in the studio. But what I can say with certainty, is that the low cut is not what’s causing the problem. Ultimately, no small capsule mic at this price range is ever going to sound amazing without some work. Perhaps DJI should do some more of that work for us, but i imagine that for the majority of their customers, it’s not important enough. For those who do care, they will then have the expertise to do the work themselves.
@AndyManCam sounds like you’re over qualified 😅 Honestly I found that the default setting of the low pass filter was an over arching issue with many creators having a muffled sound out the box. Are you a DJI 2 owner or is the Rode pro your wireless Lav system of choice?
@@Fredo.heavyy Haha! Aren’t we all mate! Over qualified and under valued! 😅 I guess the mic situation is all a matter of perspective i suppose. I’ve just gotten a DJI mic 2 and came into the experience expecting the sound to be a little lacklustre and needing to ‚fix‘ it in post. I’ve got a Zoom H1 field recorder which with the included lav mic sounds pretty good out of the box. But it can’t do wireless, isn’t as small as the DJI transmitter and won’t interface with my action cameras and phones directly. Horses for courses really. Maybe the Rode would have sounded better, but the form factor and integration of the DJI (I have DJI cameras too) made it the better overall choice for me personally. Maybe DJI will improve the clarity with some firmware EQ. Until then, we’ll just have to concentrate on the positives and remember that we can fix the negatives ourselves! 😉
@@Fredo.heavyy incidentally, in the interests of humble pie, when i said a high pass would make things muffled, i was wrong. Thats actually a low pass, or high cut. My bad. 🙈
I'd like to know if the rode pro simply has a better built in mic or if actually they're applying some EQ on device to make it sound fuller like that. Like maybe the dji mic is just a flatter frequency response? Kind of like how images from pro cameras often need some saturation and contrast tweaks? Maybe it's just a cope lol.
You’re not wrong, it’s exactly how a camera can shoot in “RAW” vs “JPEG” and it only matter if you’re modifying the image (color, exposure, etc) Spec wise I think I saw the rode pro has a better “frequency response” (more range) , idk by how much doe. But in real world applications it’s negligible to me. No cope if you want a 32bit wireless Lav system: DJI Mic 2 has better form factor + user interface + better case Rode Pro has better out box sound + locking lav / time code Choose accordingly
I could'nt hear any difference with low cut on or off.
Took me awhile to discern the difference.
Also depending what device your using and head phones, it all a little tricky.
You're right, audio is terribly subjective. I wonder if we can expect a mea culpa from other youtubers about the low cut filter being on?
*Is the dji mic 1 better than the mic 2 for live streaming because the mic 2 has flat sound?*
*is there audio profiles on the mic 2 for non flat audio?*
This video is old, the DJI Mic 2 has gotten a few firmware updates that “fix” the sound profile
@@Fredo.heavyy is there multiple sound profiles you can choose from?
Did a firmware update fix that problem where both mic 2 transmitters don't sound the same?
There is not a selectable audio profile for the DJI Mic 2 system.
My original unit didn’t have any difference in sound on the mics so I can’t speak on that.
I don’t think a low cut should be muffling audio, if anything it should be sounding crispier, no?
Why would it make the audio crisper?
If you have low frequencies in your voice and the “low cut” filter removes them, you’re gonna sounds worse.
If you remove low frequencies you should be only hearing mid-to-high frequencies which is where sibilance and crispiness lives.
It’s not a user error, they just released a new firmware and the audio sounds way better.
Yeah no way a low cut filter is doing damage. That’s ridiculous
Reports coming in the firmware hasn’t changed audio, if at all.
Have you tested on your unit?
@@Fredo.heavyy so dji mic is better if u think it is?
@@CryptikzChannel I still use the DJI Mic 2, I still think its the best wireless lab solution.
i can confirm thst the audio is the same. the problem commonly reported is that mic 2 used as standalone records way lower than when connected to pocket cam 3. turning up gain etc does not solve it. never found a solution for it.
great video. thanks boss
Just a heads up DJI released new firmware earlier today (01-31-2024)... default setting is still for 'Low Cut' filter is 'ON' for this firmware as well....though I think it sounds better with newer firmware release and I'm not really noticing a difference between this filter being ON or OFF (at least not to my ear).
Thanks for the heads up! I’ll check it out on my end and see if I notice any improvement
Same, couldn't find much difference.. :/
I really doubt a low cut filter is going to ruin anyone’s audio. Doesn’t add up to me.
You doubt it but I’ve got a video showing casing it?
Just open up your video editing program of choice and test it yourself.
Hi..I am a stand up comedian and I am havin g a hard time setting my DJI Mic 2 to my needs. I need my voice but also record the audiences laughter... My sound is quite clear im the recording but I think the laughs are not as loud as it should be. Can you plz help recommmend the ideal setting for doing standups?? Thx u very much
❤❤❤
That's a a tough environment because levels are gonna be all over the place but I'll try to explain.
The closer "source" to the mic is going to get those most isolation, so you have to pick one or the other (your voice or the crowd)
What you can do is point the mic (capsule down) towards the floor and pick up all the sound in a more "even" capacity. Also make sure Noise Canceling is OFF and Low cut filter is OFF.
A real solution would be to record a second track with a mic facing the crowd and then mixing the audio in post but that's Movie levels of production work.
@@Fredo.heavyy hey Man, I really appreciate you taking the time to help me out. I’m a fan of your channel and really enjoy your videos.
I will try your suggestions. Again I really appreciate it. Thank you very much. It was nice talking to you.
Fredo! I liked & subscribed!!!
I had muffled audio last night and had to reshoot tonight. You actually helped me a lot!
I liked & subbed!
Btw, on my Fx3, it seems like it’s almost using camera audio and you can hear cop sirens (live in LA, Venice beach) and even the dripping from the hose in the background
It’s terrible. That’s NOT subjective 😂
Can I fix the crappy muffled audio and all this crazy background noise?
PS I already used the “vocal isolation AI” feature in resolve. I just need to clean this up…
Thanks dude.
what are your transmitter and receiver gain settings? I still cant figure out how to setup this settings
What device are you using it with? That’ll help me direct you
@@Fredo.heavyy iphone 11 & 15 pro max
And you’re recording audio directly into the iPhone or sync an internal recording in post?
@@Fredo.heavyy direcly from iPhone. I think that whatever level I put my receivers gain, nothing changes..🤣
@SotirisMoraitis92 iPhone are a little tricky when using the adapter (usb c or lighting)
Depending on what app you’re recoding on the audio might not work correctly.
I’ve used the black magic camera app and manually selected the DJI mic
Thank you for the low cut off!
Man what is the difference between volume level and the level on mono ?
This was great! This helped me a lot, because I really was feeling that Mic 2 had a muffled sounds in my videos. Great channel you have here! Thanks for all the tips, I’ll come here often! Cheers from Lisbon, Portugal
Thank you so much bro! Just subscribed to your channel! I've heard from someone else that the audio was " muffled" but to be honest I never noticed. But I'm changing the low cut filter off.
Hey Fredo... Love Ur content from India.
• What should be the ideal gain levels for 'RECEIVER' & 'TRANSMITTERS' when we connect them to Android device !?
• By the way I've bought DJI MIC 2 after watching videos. 😊
You in the bay area?
East coast, Nice GTR btw
Sounds like dji 1 is on a V curve and 2 is flat which is preferable. Moat reviewers are just going to show you the flat audio youre completely right
Being a fellow New York City goer amazing video dude thanks for the help!
🔥💣💥Amen. Just need 32 bit trigger w camera trigger to record so no delay for better manual sync🤪Thank you im in
I work more with producing music than video but yes when going through my settings i noticed the lowcut immediately.thanks guy
Thanks for the video. Im planning on purchasing a DJI mic 2 for when i bowl my leaguesand tournament videos on my channel
Will work well in that application, especially if you use 32 bit float so you can manage cheering or loud strikes.
Good content bro learning a lot of new things off your channel.
DJI just released the new firmware update.
Hey bruv, do you know how can I install it ?
What if you don’t have that receiver thing? I just have the mic. Is there a way to change it?
Yea you need the receiver to activate the 32bit float capabilities
can we get a video on EQ Settings you use in Post for DJI MIC 2?
DJI MIC 2 - EQ settings for BETTER audio
ruclips.net/video/HptaRLz4JhU/видео.html
keep em comin you have to get into the 1M+ community with that quality and authenticity of yours! Go Fredo! ;)
Best vids, just fixed my audio… thx Fredo
Banger video... this is the info that the people needed.
Hey man! Love your content! As a fellow videographer, audio monitoring is key for me. I've been trying to connect my DJI Pocket 3 or DJI Mic 2 to my bone conduction headphones via Bluetooth while recording for wireless audio monitoring. I've asked around on RUclips and the DJI forum but no luck so far. Any chance you could share a wireless solution? Thanks a bunch!...... really appreciate your help here...
Not sure that Bluetooth monitoring is possible.
My understanding is that the Bluetooth connection is reserved for the mic unit to send m audio to (iPhone, action cam, laptop etc).
What documentation have you read that says you can monitor via Bluetooth headphones?
Yeah I did that right when I got mine . What's also crazy is I've watched tons of videos and people are saying the rode wireless pros sound better and while they are clearer when outside they pick up more noise surrounding the person speaking . The DJI picks up and separates the audio of the person speaking better that the rode wireless pros .
When doing EQ, is it necessary to record in 32 bit float to get that quality sound on your video, or can you achieve similar results with 24 bit?
you can get away with 24bit as long as you're not
"peaking" screaming.
32 bit float is better for removing sounds that might be too low or high. I record everything in 32bit float if possible.
@@Fredo.heavyy Awesome, thanks!
Best of luck on your YT journey
How do you get the static noise floor out of the backround?
Make sure you have the gain set appropriately and record and 32bit float.
I haven’t experienced any noise or static in my recordings, it honestly provides some of the cleanest audio for me.
horrible autofocus
Wym?
Some people are claiming dji mic 2 has issues with third party lav microphones. Do you think that's true? I had to use the sennheiser g4 system on a shoot and it was so much fun using those that I never want to use them again. The dji mic 2 seems like an amazing replacement for such a system, but for professional use cases I need to hide the mic with an external lav.
Also some forums claim the dji mic 1 has a loud noise floor/ 'isn't very quiet' compared to the sennheisers. Do you think they've improved the noise floor on the mic 2?
The DJI Mic 2 does have limited compatibility when it comes to Lav mics
DJI did this on purpose so you’re more likely to buy their Lav, which does sound good from what I’ve heard.
If you’re hiding the transmitter and already have a collection of Lav w/ locking connector then Rode Pro might be for you
Also I haven’t found any issue with noise floor on the DJI Mic 2 w/ 32 bit audio float
@@Fredo.heavyy Thanks! I don't have any lavs let alone locking ones. What does limited compatibility mean? I'm fairly sure on any other wireless lav system the transmitters accept basically any microphone input.
@@definingslawek4731 I believe that as long as you use lav mics that use TRS connections instead of TRRS connections you should be fine, I'm gonna actually test mine later today or these next couple days. I have a couple Saramonics ones that I try.
super merci !
Well disabling the cut off definitely helped, thanks 👍. Happy to find out I was not crazy somehow. It sounded muffled
I'm finding out that the DJI Mic 2 I have is not recording on my phone via the USB in. I have a Samsung A32. I'm wondering if I need a newer phone? Thanks for any help.
Turning off the low cut along with the noise canceling was the first thing I turned of after doing the firs test when I got it, I were shocked hearing the bad results till I found it in the menu and turned those off.
Bro, I've seen countless reviewers experiencing problems with this thing.
Anyway, Deity Theos absolutely demolishes this mic.
how to apply EQ ?
I do it in adobe premier
Great video! It happened to record and mono is there a way to separate the two receivers onto separate audio channels, or are they baked in to the footage for good?
I am curious how it compares with the rode wireless pro
Good information. Thanks, subbed!
Fair play on your honesty dude, I did the same thing on my first DJI Pocket 3 vid hahaha! 🤣
I’m sorry if this is a stupid question, but I’m still new to the recording/editing process, on your video when it changes to “DJI Mic 2 EQ Applied” is the EQ what you’ve done in post, or some settings you’ve made internally on the mics? I “upgraded” from some cheap Amazon wireless lav mics to the DJI mic 2, but ever since my sound quality is horrible. If I record with one mic it sounds decent, but as soon as I turn on the second everything gets hollow and tinny. Unless I can figure out how to fix this issue, my $30 mics are working better for me right now. Appreciate your video!
Sorry I sent this question before the video was over, I’ll check out the other video regarding the EQ and see if I can fix anything. Thanks again, this was a really good video!
Subscribed❤❤
Damn gji mic 1 is soooooo much better😍
Hi !
enjoyed your video.. I need your advice. I have the DJI wireless mic 2. I have the transmitter and receiver set to +9 gain...low cut -0ff. I am recording on my Iphone 12. however when i put that video in Filmora... the audio from the iphone video is low and cannot be raise much at all.. any help would be appreciated.
Rico
Haven’t used the Filmora app before but I’d make sure you’re selecting the correct audio source to be DJI mic and not internal mic
@@Fredo.heavyy thanks for the quick response!! I will try that!! have a great day!!
Thanks you for sharing your experience. ❤❤
Thank you!! ✌️
How to you get to the settings on the transmitter, I only have the mic levels come up??
Swipe down from the top
Whoa awesome thank you so much!!!
I don’t think a low cut filter is what you think a low cut filter is. A high pass filter would make things sound muffled.
What software do you use to edit your videos?
@@Fredo.heavyy I use Davinci resolve for the videos and, when needed, Logic Pro for the audio. I’m also a musician with experience in sound production and live sound. Any audio that is muddied or muffled, whether live or recorded, gets a low cut filter first of all. The bass and sub-bass frequencies of the voice are the main culprits for decreasing clarity of the audio. As well as using up valuable headroom, for no audible benefit. (You can’t have the volume as loud, if inaudible rumbles are eating up your bandwidth).
I’m not saying that there aren’t differences or that the microphone doesn’t need EQ in post. I use EQ‘ing on vocal tracks recorded with high quality condenser mics in the studio. But what I can say with certainty, is that the low cut is not what’s causing the problem.
Ultimately, no small capsule mic at this price range is ever going to sound amazing without some work. Perhaps DJI should do some more of that work for us, but i imagine that for the majority of their customers, it’s not important enough. For those who do care, they will then have the expertise to do the work themselves.
@AndyManCam sounds like you’re over qualified 😅
Honestly I found that the default setting of the low pass filter was an over arching issue with many creators having a muffled sound out the box.
Are you a DJI 2 owner or is the Rode pro your wireless Lav system of choice?
@@Fredo.heavyy Haha! Aren’t we all mate! Over qualified and under valued! 😅 I guess the mic situation is all a matter of perspective i suppose. I’ve just gotten a DJI mic 2 and came into the experience expecting the sound to be a little lacklustre and needing to ‚fix‘ it in post. I’ve got a Zoom H1 field recorder which with the included lav mic sounds pretty good out of the box. But it can’t do wireless, isn’t as small as the DJI transmitter and won’t interface with my action cameras and phones directly. Horses for courses really. Maybe the Rode would have sounded better, but the form factor and integration of the DJI (I have DJI cameras too) made it the better overall choice for me personally.
Maybe DJI will improve the clarity with some firmware EQ. Until then, we’ll just have to concentrate on the positives and remember that we can fix the negatives ourselves! 😉
@@Fredo.heavyy incidentally, in the interests of humble pie, when i said a high pass would make things muffled, i was wrong. Thats actually a low pass, or high cut. My bad. 🙈
Would you also recommend for motovlogging (Transmitter inside helmet) to turn off lowcut? Thanks, great video.
This is what I am trying to find as I have found some of my audio is echoing. I’ve got my mic in my HJC helmet
Thank you! Def a good tip.
Thank you!
thanks a lot! god bless
Gem 💎💎💎
Thanks brother!
I'd like to know if the rode pro simply has a better built in mic or if actually they're applying some EQ on device to make it sound fuller like that. Like maybe the dji mic is just a flatter frequency response? Kind of like how images from pro cameras often need some saturation and contrast tweaks?
Maybe it's just a cope lol.
You’re not wrong, it’s exactly how a camera can shoot in “RAW” vs “JPEG” and it only matter if you’re modifying the image (color, exposure, etc)
Spec wise I think I saw the rode pro has a better “frequency response” (more range) , idk by how much doe.
But in real world applications it’s negligible to me.
No cope if you want a 32bit wireless Lav system:
DJI Mic 2 has better form factor + user interface + better case
Rode Pro has better out box sound + locking lav / time code
Choose accordingly
Thanks man, you in the UK?
US, New York City but respect to all the creative mandem over there too