Good-looking ride, personally I think if I ever have anything with a stage 4 cam it'll probably have slicks on the back so the guys with the torque cam or stage 1 don't blow by me as easily on the street in a daily light to light. I bet that cam really comes to life after five grand I'm jealous.
What is the full size of your wheels and tires if you don’t mind me asking? Rim diameter and width as well as offset of you know it? And what tire size also? Full number
@@prod.yayo5715 because its my daily driver and its fun 600+wheel no NA fbody is faster then me yet. But like i said its my daily driver and i just wanted simple power i bought a s10 squarebody 2600LB stock weight to be my dedicated race car/truck but someones always gunna be faster even if your making 2000hp just gotta enjoy what you got and take pride in it.
Good-looking ride, personally I think if I ever have anything with a stage 4 cam it'll probably have slicks on the back so the guys with the torque cam or stage 1 don't blow by me as easily on the street in a daily light to light. I bet that cam really comes to life after five grand I'm jealous.
Very cool truck. Sounds great
I was riding in my uncle's cammed Silverado and some guy said its chopping hard with a straight face i told him it had a missing vacuum line🤣🤦♂️
That's an awesome truck brother 🤘
Perfect truck! I have the same exact engine and trans bolt on’s.
Sounds great, looks awesome. What did you do to the suspension to get that stance?
It had 3in bell tech drop springs upfront and bell tech flip kit in the rear. So about a 3/5 drop
Sounds so nice man!!👍🏻🇺🇸
what drop and tire size? Sounds good.
About 3/5 drop, 275/40/20 and 315/35/20 tire size.
nice Javier
What is the full size of your wheels and tires if you don’t mind me asking?
Rim diameter and width as well as offset of you know it?
And what tire size also? Full number
Couldn’t give you the exact specs, but the wheels are from 2014+ GM trucks. Tires are 275/40/20 front and 315/35/20 rear
what’s everything done to the motor?
Great sound bro, with the cam what mods did u have to do to support that big of a cam?
Just your typical bolt ons and a 3200 stall torque converter.
@@JavierCangas when you say bolt on, do you mean intake and heads?
💗
Sounds awesome! Have you ran it on a dyno? And any burnout videos? lol
No, burnouts yet. Still one wheel peel.
How does/did the power brakes feel with this 109 LSA cam?
It doesn’t seem any different, it’s got a factory 03-06 brake vacuum pump. So that might actually help.
Hey man nice truck what wheels are those
2014+ Silverado Tahoe wheels I believe.
Alv 🔥
I stay in Oklahoma man just swapped my truck with a stage 3 and needing help 😒
Do you have build transmission on bigger converter..
For this cam
Stock 4l60e and converter, transmission went out about a month ago. I have a 4l80e that is going to go in.
@@JavierCangas put a healthy stall in it buddy. You will be amazed at how much better it drives.
@@timh1187 what’s a good one ? Rebuilt transmission
@@zxJC34xz I use a yank converter in my truck. Ut I know lots of guys use circle d. There is a few good ones around.
Drop and tire size ?
3in springs, rear flip kit so like about 6in. 275/40/20 & 315/35/20
Do the 315 fit on the stock wheels ?
Sounds superb 👌🏿. What's your exhaust setup?
Longtube headers, into a 3in y-pipe dumped after the cab. It has a 3in flowmaster fx on it now.
@@JavierCangas do U have any vids with the flowmaster fx ?
@@kolbyhumbert2680 I’ll upload one this weekend, I like the way it sounds at idle and low rpm but not so much when it’s shifting at wot
@@JavierCangas sweet thanks man
@@kolbyhumbert2680 i uploaded a short clip with the flowmaster
What’s the exhaust setup? Is it true duals no cats from the headers, or is it catless y-pipe
Longtubes > 3in y pipe > single in 3in to dual 2.5 outlet muffler. No cats
Mpg ?
Top speed ??
What’s the specs on your cam
Stg 4 btr truck cam. V1
What stall u running
3000-3200 circle d
Takuache no cema
Do these trucks come in manual ?
Yes
V6s unless you swap to v8
cam specs?
BTR GEN III & IV TRUCK CAM - STAGE 4 - V1 - 32430112R1
224/230 .553/.553 111+2
@@JavierCangas Beefy
I can honestly say cammed vortec trucks are all show no go sound mean asf but at the end of the day we’re still heavy slow trucks ☹️
Boost works, gapped a 10 speed eco and a gen2 5.0 both mustangs
@@texasstreettunes1310 yeah but why boost when you can get a f body cámaro aka 4th gens and catfish and be much faster
@@prod.yayo5715 because its my daily driver and its fun 600+wheel no NA fbody is faster then me yet. But like i said its my daily driver and i just wanted simple power i bought a s10 squarebody 2600LB stock weight to be my dedicated race car/truck but someones always gunna be faster even if your making 2000hp just gotta enjoy what you got and take pride in it.
You crazy
Converter??
Stock v6 converter.
what RPM does it idle at
I had it tuned to idle at about 900-950 rpm during this video. its set at 800-850 rpm now.