700 HP 992 Carrera - Flat 6 Stage 4 Power Kit w/ Pure 800 Turbos
HTML-код
- Опубликовано: 19 июн 2024
- We showcase the latest on our Project 992 Carrera. This former base model now has the Pure 800 Turbos and pumps out 700HP at the flywheel.
*992 Carrera Power Kits*
flat6motorsports.com/pages/99...
Mod List:
- Pure 800 Turbos
- IPD Plenum
- CSF Intercooler
- Do88 Inlets and Pressure Hoses
- BMC Filters
- Kline Valved Exhaust 
Авто/Мото
My 992 Turbo S Stage 4 is a rocket 🚀… thank you.
thank you, like the video
@flat6motorsports (John) - It would be awesome if you guys can try various aftermarket headers at this power level and see if they indeed do make a difference in power and get your feedback on the sound as well.
Man your content is unreal. Loving this 992 content. Would you stick the inconel headers on this??
Downpipes and catback is already really loud. So adding headers will be pretty nuts 😂🚀
OEM headers/manifolds
@@Flat6Motorsportsare you planning on doing data logging on non oem headers/manifolds? I’m interested in SoulPerformance manifolds and headers but I’ve not seen any evidence they help at power levels at or below where your test car is currently. Great vids and great real world evidence - this is the best.
It's interesting to see the torque stay low enough to not get clutch slip and pdk fail messages. Pdk is the limiting ceiling in these Carrera. I ran into it.
Is the PDK the same as in the Turbo, Turbo S?
If you’re wanting to double the power of your Carrera, just get a Turbo
I'm curious how well traction control on launches work. I know stock it's pretty great but now you've more than doubled the stock HP
Pretty robust, I'm running Cup 2s on there now (slightly wider than stock). I suspect it would have a lot of wheelspin on Eagle F1s. I'm hoping to get some dragy 1/4 mile times when we get an opportunity to test.
I’d love to see some 1/4 times on this - mainly because a stage1 GTS has similar whp and torque as a stock turbo s, my guess is this should be capable of a 9sec pass with this stage3/4 car.
How do these enhancements effect longevity? Thanks!
i wanna know too!
How come you all don’t include flex fuel on E85 and how much for installation on 911.2 stage 4 kit? Thank you
The injectors can't sustain the duty cycle required and they aren't upgradable.
Thank you
Do you think this setup will do 9s if it was an AWD chassis?
Yes, we have a client who did 9.9 with a RWD variant
How can I find out the price on 2020 992 Carerra Base Stage 4 like this build?
flat6motorsports.com/pages/992-carrera-power-kits-by-flat-6-motorsports
Why is torque so low? Previous Carerra builds on here show much higher torque, and different curves. Is this a PDK car, or is this just part of the hybrid turbos?
I'm not sure what you are referring to, I have a graph with the different stages of builds we offer and this delivers the most torque output for a 992 Carrera.
On your "Best Kept Secret" video you put GTS turbos (and supporting mods and tune of course) on a Carrera and it made 521 HP / 530 ft-lbs.
@@nberkel ahh, that was a 991.2 Carrera on a different dyno. Those do make a little more torque with the custom tuning in the midrange but mostly due to the dyno (dynojet vs hub dyno)
I see. Didn't even pay attention to the difference in dyno type. Seems strange that a 991.2 would make more torque than a 992 though, would have just assumed them to be the same assuming same mods/dyno...
@@nberkel A little has to do with the tuning, some with turbo sizing and mostly the dyno. Overall, they make pretty much the same power with the same mods between the 991.2 and 992.
how on earth a carrera 4s is more powerful than turbo s? how´s the longevity? that´s impressive
Turbo sizing, they share a lot of engine bits/internals so are both very strong.
Please standardize the graph of the Turbo S and Carrera so they are on the same X Axis. It's misleading at the moment, as you can see that the torque/horsepower crossover point (which is mathematically always the same at 5252 RPM) are happening at different points on the graph. That makes the area under the curve comparison hard to discern.
We’ve gone a long post on this topic on Rennlist. The short of it is the visualization software doesn’t let us justify the two axis independently so it artificially pushes one the other way based on the data samples and respective RPMs. We have the raw software we can provide an export on if you ever need to see it. Just shoot us an email. We’ll keep looking for a solution that represents the data well. We use this method for quick snapshots that look presentable. Thanks for the comment.
How much HP can the Porsche manual trans handle?
Im curious about that too, also as there is no a/m clutch option I guess when the stock clutch has to go just swap in another oem unit?
We haven't seen any issues with the 650HP mark but we'll continue to have clients running more and more power over time. I'd personally prefer a manual but we wanted to get a PDK for cost and figured more folks would have them over the manual. I don't see these power levels being an issue on the manual transmission. Porsche builds a great manual and uses a beefy Sachs clutch.
Ca CARB legal?
lol. who cares.
This is in the Free State of Florida and the one good thing Jeb did in his whole life by getting rid of exhaust testing.
You can’t fart in California without a permit or approved methane capture device. No way this would be allowed where the communist live.
@@kwebmail2007I care…..can we get an answer?
Who cares 8 years b4 your first tail pipe test
👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿😍😍😍😍😍😍😍
The potential is 800 whp for a few hours…