Piscifun Review ~ Innovative or Cheap JUNK?
HTML-код
- Опубликовано: 18 сен 2024
- Book a guided fishing trip with me
www.flobass.com
Unauthorized use of this video is strictly prohibited. If you wish to use any part of this video for advertisement or other purposes contact ericflobass@gmail.com
If you have lots of reels, this weird contraption is worth checking out.
Get it here: amzn.to/2FzEx9P
This is not a sponsored or affiliate link
All music sourced in RUclips creator studio.
Pretty awesome tool. The price varies on this thing from week to week. I picked it up during a lightning deal for $25. Can't beat that with a stick!
Good to know! I also just grabbed it for the same price on a Lightning Deal 6 years later 😂
Thanks Buddy, I have just started carp fishing at 50 years old and between learning to tie knots, rigs and learning all the different varieties of the fishing Gear, it feels pretty overwhelming. Its teaching me patience, it's also exposing the "MR CLUMSY" and the "SPOILT CHILD" who i usually want to conceal from the outside world. I have spent, which feels like a whole day, either tangled up, caught in a tree (float, not me) calling myself abusive names under my breath, throwing my rod and storming off, wanting to jump in lake, Headbutt Trees, the usual relaxing stuff you associate with fishing. But Im still hooked? Good to see you showing mistakes and being human, no different from me, gives the beginner HOPE
I’m in the same boat! I am just re-learning to fish after 4+ decades! Even when i fished as a child, i never did any of the “work” as my older brothers handled everything and would just hand me the rod after all the setups were completed. So, essentially, I’m starting from scratch and RUclips is my favorite teacher! I read your comment and it sums up my experience and expectations in a way that strikes right to the heart (tho, by now, you’re probably a much better angler)! 🙂
Very nice demonstration Eric. Here is something we need to tell you is that the extra bushings are for different spools according to the diameter of the hole. Seems that the line spools you were using are better not to use them.
Piscifun j
Exactly right!
I also bought this spooler. Its the absolute garbage. The fittings that come with it, ALWAYS fly off. I had hundreds of spoolers over many years and have to say that this one is the absolute worst. Never buying piscifun products again. I have since bought a much better spooler from Plusinno and absolutely love it.
I've been using one of these for over a year now and have no problems with it. I will never go back to the old way again unless I lose it. Hint, you got to pay attention to the job and not the camera...
I think it's a great tool. Especially if you're a guide and periodically change out your line.
Wow, I found this video just in time, I ordered this from Amazon and I believe it will be delivered today. Man I learned a lot of do's and don'ts from this video. Thanks for sharing.
Just picked one up on eBay. 20 dollars and change. Free shipping. U have to look around to find the deals. You sold me on this man. Thanks a lot. 👍🏻
The diameter of the spool also has a lot to do with how many rotations you get on each spool per crank of the handle. The smaller diameter spool will make moe rotations in one crank than the bigger spool.
Just bought a setup today and bought 10-pound braid. Fishing for Northern Pike, bass, walleye, and hopefully a Muskie one day lol. thanks for the walkthrough yo helped a lot.
Awesome dude! Your username is badass btw.
I remember now why I returned mine to Amazon 1 year ago in May. Thanks for a reel honest review.
Great video...Did enjoy the real life aspect; watching the tool blow up...and show it has a learning curve. I like the spooler concept for spinning reels... Berkley has a new spooler that looks great for baitcasters..
by the way...thanks for not dropping Eff bombs when the going got tough. I like being able to watch these blog with my kids
Thanks Jeff! I try and be as transparent as possible. Glad you enjoyed it, and I do my absolute best to not swear in my videos.
I found that if I didn't either put a wrap of electric tape on the spool, or put a minimal amount of mono on first, the line would spin when it comes under tension, like when reeling in a fish. You'll see
I always wrap my spinning reel spools with electrical tap. On these Daiwa's they have a rubber insert in the middle that gives the line something to grip on.
I have been fishing for most of my life but now, at 57, I am learning how to fish. LOL! Not sure if they have made any changes to this in the 6 years since you posted this but I received mine on Saturday along with their Viper X 2000 spinning reel plus a 150 yard spool of 20lbs Power Pro V2. I gave up on those bushing right out of the gate. Since I have never spooled a reel before, this was a dream. Now I just need to get to some water.
The little inserts are for spools that have small holes. Spools with 1/2" holes do not need the adapters. Ordered mine today. Not having the line twist going on a spinning reel makes it worth it. Found it on Walmart website for $20.00
Piscifun upgraded the spooler and eliminated the spool inserts. It works phenomenally. I have spooled dozens of reels of all sizes and types using spools of all sizes and never had an issue. They have also included an upgrade to reverse the process and remove line from the reel to a spool if you want to save it or if you overfilled the reel a bit.
I use a little Elmer’s white glue to hold those little tweets on there. When you’re done, the white glue peels right off. No charge.
fwiw. fill that huge spool with heavy mono half full and tie the braid on with an fg or whatever knot you like. its a waste of expensive braid to have the whole reel spooled when you only use 200 yrds of it. saves half the cost.
Good tip.
I switched up several reels this year to braid. From what I understand it is essential to start with mono, then spool braid in order to eliminate slipping from the reel. I haven't used braid since Spiderwire in 99'?? So, I assume the information is accurate.
@@luke8646 Correct if the reel is not braid-ready for spools. If the reel is classified braid-ready you do not need to lay down mono first to prevent slipping.
This really helped, thanks. I put a thin spool of Trilene XL on the arms with the pegs the first time. Likely if I was in front of a camera, however, it would have been different :) You made things easier for me, and for that I thank you!
Awesome! Glad it helped you.
I got one for Christmas and figured I would never use it but I think I am going to have to try it now after seeing it in action.
This tool definitely isn't necessary to spool up a reel, but it does make the process much more efficient. I also like the line tension you get when it lays the line on the spool. That helps when using braid. It doesn't dig into itself as much when you fight a fish compared to spooling up a reel by hand with out anything providing tension. But overall it just makes it a faster process in my opinion.
Understand that this is not the same as laying your school on the ground or having it on a nail or any other process this tool was designed for one reason and that was to eliminate line twist.
The reason this tool works is because the spool spins at the same rate or as close to as the spool on the spinning reel spins thereby laying the line down flat and eliminating a twisting motion that would occur in any other way of applying your line to your reel .
Hey Eric, if you look at the picture From Piscifun (link you provided) the size spool you had problems with is in the picture and they are Not using the bushings. Those are for smaller diameter hole spools. Your problem was that you did not have it tightened down enough. Try that and you will have better success. Thanks Dude! God Bless! ✝
It's funny how all the guys who need to watch videos on how to put their line on a spinning reel all of a sudden are experts trying to tell the video maker how to do it. Thanks for the video. Quite helpful.
Thanks for the kind words. I'm not too worried about the armchair experts. I don't take people who rely on the anonymity of the internet too seriously. I'll be fishing the C-1 canal in Homestead this Saturday if anyone wants to tell me to my face.
I know how to spool line on, just bc ppl landed on this vid doesn't mean we don't know what to do... Also, are either of you two pros?? bc I neva heard of ya.
Good video and information. Mine arrives tomorrow (11\30\21) and your video will save me some headaches!
Awesome, Larry! Glad this goofy video helped out.
Have one it’s awesome. However I have stated spooling with braid almost exclusively. Then I add a Fluorocarbon leader.
The Piscifun spooler that attaches directly to your pole is better and won't fall apart.
Nice! Haven't seen that one yet.
I have that model and it will not spin when spooling spinning reel . Disappointed with it and their customer service sucks.
Great video. Very instructive. Thanks so much.
I’m glad it helped!
I HAVE HAD MINE FOR 2 YEARS. I LOVE IT
I need that fishing line spooler. dope video keep pushing your content. you sure are racking those subs. Excellent video thanks for sharing.
Thanks Francisco! It makes life so much easier. I love using it. Thanks for the comment on the subs. You're getting up there too.
I wrapped black electrical tape (2 to 3 turns) around the 2-piece bushing. Did the trick for my Sniper spool on baitcaster setup.
Nice trick. I pretty much stopped using those bushings and just stick to the stethoscope looking thing with no bushings.
I think you should have spooled the spinning reel with a mono backing instead of using 500 yards of expensive braid. That would still leave enough braid that you would never see the mono. In addition, attaching braid directly to the spool leaves too much chance for the braid to spin on the spool, even after filling the reel. But then again, the main purpose of the video was to trail the spooling device, which you accomplished.
I was about to buy this spooler from Amazon, which sells for AUD $58.00. After watching this video; I do not need the hassle of working with cheap Chinese plastics. My local Fishing tackle store spools my line onto the reel for me FREE of charge.
I've got the same type of line spooler made by a different company. That thing just did not work out for me with my baitcasters. Thanks for the video brotha 👊
That's weird. This thing spooled the baitcaster with ease. I've respooled it with braid since, and it spools it up like butter! Well... when it doesn't explode the pieces everywhere.
Why would you use it with a baitcaster?
Do you have a video showing whether there is line twist on your spinning reel? Cause that'd be great 👍
Sorry, I don't have a video of that.
I love that lipless Crank bait on your hat
Best place for a spare lure when you only want to bring the bare minimum.
@@FloBass I also liked the souling for the reel
It's far better if you take the springs out you don't need them and just use the tensioner to clamp down on the spool,I had the same problem with the springs popping out and as much as I tried could not get them to locate without popping again,what there for I haven't got a scoobie. The ideas great but cheap design build as you can see from the vid. Hope this helps.
Make it easy for you. Counter clock wise off the line spool. The reel spines clock wise on the reel. Not rocket science. Use backing I only use 50 to 100 yards of line after backing. That's from line counters up.
Steve Benson it's not one to one unless the spool diameter is the exact same as your reel spool diameter which isn't likely. Also the diameters of both change as line leaves one and the other gains line so there's no way to have the same diameter in practice. The counter clockwise method mitigates twist but can't eliminate it.
How did u fix that one arm? Was there a spring that flew off, that you had to find on the ground? Or was it something else?
There's a spring that keeps tension on the arm. It had popped out of place. Just had to take it apart and put it back in place.
Cool video, I'm definitely going to get this
Thats a pretty neat gadget there. I do the screwdriver through the spool holding it with my feet method like you mentioned. Works ok for baitcasters but I never know if i am getting the line on tight enough.
Yeah that was always my issue spooling up baitcasters that way. Its well worth the money to have this Piscifun thing.
If you unscrew the big middle screw, it tightens the arms for the skinny spools
I've been using this thing for years now, I love it! Never had an issue, and if there was a problem, Yo I'll Solve It!!
Check out the hook
@@corkyvanderhaven3391 While the DJ revolves it.
Pencil holding between my big toes for many years! May be time to buy a proper spooling gadget!
My mechanical engineer ass decided that I needed to build my own version of this recently. Works pretty well, but God damn I should have just ordered the $25 one 😅
I bought one of those and have spooled two spinning reels, and in both case, the line bunched up at the back of the spool and tangled up when casting. Not sure what I did wrong.
Just ordered one, it's coming tomorrow...hope I have good luck with mine. Spooling up my Penn Battle 3 with one of those tiny spool of 30 pound braided spider wire... Any tips for working with the skinny spool of line?
I have this line spooler, and I found that I can’t get enough line tension to properly load my reel. My verdict is JUNK!
That’s strange. I get plenty of tension.
Why not throw the spool of line in a bucket of water......works like that gizmo ya got there....
What is the knife your using? It looks awesome!
Made by another RUclipsr iraqveteran8888
@@FloBass Doesn't look like he's making it anymore from what I can find on his website.
Man, I haven't fished in about twenty years, but if I were to fish again I'm sticking with mono, all this trouble just to be able to fish with braid. I used to just throw the spools of mono on the ground and start cranking on the reel to spool it up and never had any trouble, of course I wasn't fishing the ocean and I never needed to throw no more than 20 to 40 yards out.
looks like it could be usable but i dont think it would withstand a few years, and i have this obsession for counting GUYS , you only said it 22 times. have a great week.
lol. So far I'm confident this is going to go the long haul provided I don't drag it behind my car.
You didn't need any backing on the spool?
Is that 5000 you got for bait and weight or lasting/jigging?
Piscifun Has Better Updated Version Of This Line Spooler? Pisicifun Speed-X Line Spooler
Man, I'm late with this post. But what's the model of that knife? Checked Iraqveteran8888 site and didn't see it. Thanks!
I got it in one of his man cans about 3 years ago. Was the first knife custom knife he did. I retired it when I received another knife in a man can. It’s a QSP Sthenia and I like it a lot better.
Nice lookin' spooler....Does it put any twist in the line & will it take 1/2 lb. spools....thanks
No twist. Probably not going to fit a 1/2 lb spool.
Thanks!!
I need one of these ✌️🎣👍
LOL. Old vid, but good review. Been living in Boynton Beach, FL for 30 years.... still trying to catch my first snook. :( Go the spillways they said... nothing. Cast the docks in the Intracoastal they said....nothing. I'm pro as catching stingrays though. LOL
I feel you. I have a difficult time catching snook as well. The bait is beginning to show up on the beaches. Should be in full swing in June. Good time to throw the sabiki and cast net, and come away with some bait for snook in the surf.
What about line twist with mono on spinning reel.
These are pretty cool tools and can really save time. Yet everyone has the same issues with form and fit. They've been around for years, but neither Piscifun or their competitors have made any improvements. How about a deluxe version or just an upgraded product?
Since I've had about a year with this under my belt I'd say it works really well now that I'm familiar with it.
What sunglasses are you wearing
Why is there a lipless crankbait on your hat
I thought that's what everyone does...
Well it is innovative and puts the line on your spool with little to no twist as advertised. But why do you want your line put on the spool without twists? The first 100' or so off the reel doesn't stay that way. Especially after your first line break or a dozen or so casts.
not sure how it would work, if those small parts are that irritating. you could always hot glue them in place if they fit most spools.
use a drill and attach it to the reel handle shaft that runs through it
no worries mine is apparently much... MUCH smarter than me. got the Penn 113n spooled fine, saltx 6000 not so much.... yet
6:00 I don't know how you managed to get that to happen... My issue with these things is they don't spin like yours is doing.
There’s a cadence you have to find. Just start reeling really slow and follow the speed of the spool as it spins. Speed up really slow and eventually you’ll get it going really fast. It took me a little bit to find it as you can see in this video.
I can’t get mine to spin either
Seems like it worked better when it was held vertically.
It doesn't really matter. You just have to find the cadence.
I didn’t think braid twisted.
It can if it doesn't come off the spool and onto your reel correctly
Got one Why spool to the top?
I wanted as much line as I could put on there in case I get hooked up to a big tarpon. Also plan on kayaking bait out on the beach so if I paddle out 100+ yards to get past a sand bar, I'll still have plenty of line if a fish decides to take a big run.
I gather it doesn't matter which way the line comes off the spool to start?
I haven’t seen a difference for a spinning reel with this, but for a baitcaster you want the line to come off the top of the spool.
The pieces that kept popping off. Thinking a 10-32 or 1/4-20 screw with washers and a nut, would hold them in place. Keep in mind screw would have to be proper length. Should be able to find one in right length at hardware store.
Cool vid... NICE HAT!!!
Haha thanks!
tightly is a word
Worse expenditure I've ever made, as far as fishing gear is concerned. I've used it twice now, once for a spinning reel, the other time for a baitcaster. If you're using a standard reel filler spool, 330 yards or so, this thing is a nightmare! Tangles and snarls galore and the line constantly comes off of the side of the spool instead of spinning. Totally useless, in my opinion.
I think billet aluminum would be nice.
Dam Bro 700 subs time for another double give away ! nice work !
Thanks home slice. Yeah gotta do another double giveaway... Not a bad problem to have.
That's why u should always read instructions
I hope as time goes on you can break yourself of saying You Know constantly . Very annoying. Don't feel bad you are not the only one doing it. Really You Know is just a filler, instead of the old "uhhh" that was used. Your video was good and definitely worth watching.
You know, I think you're onto something.
Haha lol you know, thats funny!!
Five inch spools don't fit on that model, as I found out this afternoon. Disappointed in that.
I bought the identical one from ECOODA. Actually read the directions and filled my spinning reels and 2 offshore Penn Fathom 25's without a hitch...and WITH the flying nubs! :)
You have to much line on there
from what i can see
i think i will stick to what works the old fashion way
Maybe a little operator error. Lol.
Absolutely a lot of operator error. The instructions were on the back of the package that I failed to look at.
I HAVE BEEN USING THIS THING FOR YEARS AND HONESTLY I DO NOT THINK THIS REVIEW IS VERY FAIR OR REALISTIC, i HAVE BEEN USING MINE FOR 8 YEARS OF REGULAR FISHING, AND I DON'T KNOW HOW I GOT ALONG WITH OUT ONE???
You didn't watch the entire video or listen to anything I said...
💯💪👊LET'S GO!!!
What is the price of it
Reading the instructions is not the American way for the American fisherman. Trial and error is a far better method so that we may buy more stuff; which is the American way!
Heck yeah! Murica! There's no time to read the instructions when you have a beer in one hand and a shotgun in the other.
You didn't see my smiling face. Cool video
I see everything
Why does it spin though? I don’t get it
Eliminate line twist
Even after manually getting mine to spin with my hand turning it I can't get it to spin on its own. I start slow like in the video and line just comes off the spool. Is there an adjustment I need to make somewhere to get the clamp to spin the spool better?
There's no adjustment. You just have to find the right cadence. There's a point in this long ridiculous video where you see me find that cadence. Then you just lock in and don't try and spin it any faster.
@@FloBass I now realize mine was red and using the newer version of the product. I think it had a silver nob that loosened it up slightly. Instead of holding it horizontal, this time I held it vertical and as soon as I reeled it slow it spun for my two reels today with 0 problems. This thing is awesome!
why do you use flora on the baitcaster ?
Abrasion resistance, almost invisible in the water, has less stretch than mono, sinks... Many reasons.
"Main Doohickey" thingies are always good to have. LOL!!
I recommend this Doohickey to anyone who fishes.
If you can see me now I am more than smiling right now. lol
I love it when people smile!
Funny video!
Got a add for this while watching the vid😂😂😂😂
Do you remember the name of the company? I need to report it.
Badass
cool vid
You can buy a knock off on Ebay for less than half the price.
Put a little light glue on the spool to hold the plastic thingies until you get it all clamped down.
Pisci the c is silent. I’m pretty sure like the astrological sign.
New Subscriber !!!! Awesome & Informative Video !!!! It's great to see videos showing the daily grind of hunters & anglers from blinds to casting bait nets. Keep up the good work and can't wait till your next video....Check out my channel & latest videos too, Tight Lines & Thanks, USCG Captain Scott Manning, US Army - Veteran
Never needed one. I just drop the spool in a open drawer and away I go. Never had a problem doing it that way.
2 minutes in and you just keep talking about Florida and knives..I switched off. I thought my time would be better spent telling you to shut up and get on with it.
You mad, bro?
I believe you're a little confused on who's having a go at whom.
n c him not know bear hunting...when bear pull a half-moon and begin hunting bear hunter....him better stay out of woods