Riley Defense Krink: In-depth Review After 1000 Rounds!
HTML-код
- Опубликовано: 6 апр 2024
- LIKE THE HATS AND SHIRTS YOU SEE IN THE VIDEO? A great way to support us is by picking one up!
thirdpinthreads.com/
Buy tickets for Kalash Bash 2024 while they last!
www.kalashbashtx.com/
Follow us on Instagram.
klayco47?h...
Follow us on Facebook.
/ klayco47 - Развлечения
Well done Riley Defense. Surprising results, there’s finally starting to be a glimmer of hope in the American market. Great video
Actually a few American AK builders that are holding up pretty well despite what everyone says or repeat what they heard
@@shawnpena5337 builders, yes. Mass producing on a production line with minimal failures to the end user? No
if you think this bolt looks "good" after 1k rounds, you should get your eyes checked.
@@bobbem2000 no need to “think”. Headspace gauge has done that for us and says bolt is fine.
@@StraightRazWhorbroke.
My Krink should have 1200 rounds thru it by the time my follow up video comes out.
Oh heyyy Mark
@@Scott079 hi 👋🏻
You are so cool
How’s it handling?
@@dualityofmorons very similar to Klay's. No major concerns outside of the early peening.
I see Klay, I click. Doing gods work as per usual! Best AK channel on youtube
All this Krinky talk has been getting me in the mood for a little krink action myself. Something about the ultimate bad guy gun.
That shade from Cody on the hammer polish! 🤣
Hey man it doesn't need to be perfect LOL
Lol roasted
That thing looks gnarly with the Putnik.
Im glad to see the Riley has held up so far i may have to pick one up
Another great video, thanks Klay!
Klay doing God’s work, keep killing it my man. Love the genuine, honest, fun reviews.
مرحبا تجربتك ممتازه جداً وأنا أحب الكرينكوف السوفيتي أنني من اليمن بالشرق الاوسط ونقتني نسخ أوتوماتيكية 🔥💪🏽
Gonna be buying a new AK this month and the Krink has me intrigued. Thanks for your testing
Freakin awesome. Always love the short mags.
Keep doing great things 👍 I like this krink . It has the looks for sure
❤❤GOOD REVIEW ,I APPRECIATE YOUR HONESTY !!
The safety lever was having a fun time wagglin. I wonder why they didn't put a notch for the safety detent at the bottom
Kind of want to see that putnik on an rpk with those round 30 rounders. Great stuff as always.
Great video bro!
Awesome. I like ramsey, he was working for inter ordnance when they made all those cast ak47s.
Love the fire balls!
I have a Riley 74 that has a very similar wear pattern on the bolt after 400 rounds. It gets some hard to clear failures to feed when the the gun is hot and I'm hoping it's just the lacquer coated ammo. Got a set of head space gauges on the way just to be safe.
That waffle with subs…so sick 🔥🔥🔥
Great, go Riley!
I didn't kno he made admin pouches. Thats pretty f-ing cool. Need to gets me one of them
Getting my costumes finished up and packing up my camping and competition bag this week for KB2069! Shit’s gonna be a BLAST!
Looks good. What watch you got on at the breakdown section at the end?
Klay- with the sudden increase speed of suppressor approvals, have picked up no less than SIX cans in the last 3 weeks! ;-) One is a Wolverine- up until now I have many AKs, but no shorty AKs, so now researching best options. In your opinion, what would be a good short barreled Ak for a dedicated HD SBR build? I am leaning towards the Zastava M92, but also looking at Sam7k, Draco, PSA krink etc. Thanks for your advice!
Cody!!! Our favorite stinky guy!!!
lol the muzzle blast was taking the bark off that tree.
Buen trabajo causa.
You should try a Rearden Blyat muzzle brake and an atlas with the Putnik.
Did Cody use a field gauge on the bolt? Also did you take the hump out of the ALG trigger so it doesn’t damage the back of bolt carrier
16:19 I heard that tree screaming "No Mas!"
@Klayco47 I have a question for you I own a Zastava M70 Zpap I am getting terrible accuracy with it. I dabble in casting for my firearms so i decided to do a chamber casting on it. To determine what i should size my projectiles to. At any rate what the chamber casting showed me was kinda off putting. I found out that the bore on this rifle is .314 and the chamber looks to be euro spec. All my knowledge tells me this is the reason I’m getting terrible accuracy with fmj. Trying to find good info on this subject is very difficult. Any fmj I have taken apart and measured has all been .310. Im at a cross roads with this rifle I bought it privately so Zastava refuses to help me fix it without paying them more money. If you could shine some light on the correct bore for 7.62x39 that would really help me out.
Would love to see how the Hyperion K sounds on that bad boy.
So I have a jp enterprise recoil eliminator on my galil ace 8” in 7.62x 39 and I think it’s about the same as this 2 port jmac brake
O, man. "You want me to fix that?" LOL. I also resurface my ALG hammer faces per your recommendation and I've had great luck and smooth operation forever. They do need to be level so the carrier doesn't lean but I might have let Cody fix it if he thought it was in need. Lol.
lol, nothing like being cut down in your own video. Humbleness and a strong spine for him to leave it in the finished video.
hey klay cool video and can you do a video on wicth big 30 rounds drum mag is the best
Easy Romanian top loader
Not sure if anyone mentions it but your safety lever while you're shooting rapidly goes up and down kind of trippy
Yeah it’s because the Riley safety selector cuts are shallow and in the middle of the receiver when they should be lower down.
brother your production is next level, what mic are you using?
The RODE mics 🤟
I get bump fires on my ALG triggers whenever I try to zero my optic or do controlled shooting like you did. :(
Trick it out more before that match you are talking about entering. I would love to see it tamed with the KNS piston. Also, are there any companies you know of with carbon fiber parts for AK's, maybe a handguard, grip or folding stock??
Klayco47, do you ever use those recoil buffer pads that you put at the back of your recoil spring?
No sir
I am thinking that the JMac 2/Brake held up Good Today with the Putnik?!
Get it hot!
new channel name Kinky Krinky nice video boss
That 196 grain has last round hold open feature!
What were you using to spray down the bolt?
I typically do not get to the point of needing to replace parts on my firearms, that being said, arent you able to replace the Riley bolt with a WASR bolt and rectify some of the damage to the bolt? Or am I wrong and it would ruin headspacing?
That being said, if you are just able to slap a new bolt in the gun, then it would still be cheaper than most other AK options.
Or just get a draco and stop buying junk to begin with
We need a Gen 1 Galil 7.62 shorty video
Look at the LWRC butt stock if you want it smaller
Riley defense also told me my barrel wobbling up and down was normal.
What’s the name of that
Muzzle brake
Nice
15:17 I zero at 36yards what zero did you use ?
Controversial but; Balsamic Vinaigrette dressing is the best salad dressing ever made change my mind.
Chucking Bakelite mags on the ground hurts my soul 😂
I found 2 triangle 66’s but paid dearly for them
My main ak is an arsenal SAM7K SBR
Can’t find ALG triggers in stock anywhere
Went with the flat LBE and don’t care for it.
To much over travel and long reset
Safety kind of jump around a bit when fired.
🔥
Hey, at 23:45 you safety is walking up on the receiver. Not sure if that’s normal, but just noticed it.
Riley puts their safety selector cut higher up for some reason.
is the putnik better in any way than the wolverine or is it just the new hotness and something different?
It's shorter, lighter, and is flow through, so it kills recoil. That's a big deal in my opinion.
I like Krinkle cut fries ❤
You should get into reloading. I recently started reloading 300blk because I was tired of cost of 300blk sub sonics. It's really not difficult. If you can find a source of x39 brass it shouldn't be too difficult to develop a subsonic x39 round.
You can use .303 British for the projectile. I personally just pull apart my steel case 124grn, dump put the powder and add back 13.4grns then re seat the bullet. Works awesome on my 104 clone 12.5" barrel. No adjustable gas system. I tried the same load on a bone stock, 16" AK and it wouldn't fully cycle. Was damn close but quite. I haven't figured a load for that gun yet. Mostly because I just don't shoot it suppressed enough to care.
Actually it might be 14.3 grains. I can't remember. I'll have to look in my notes when I get home
The hat you wearing in this video I don’t see it on your website. When will it be in stock?
Sorry it's one of our older designs
That gun looks great! It would look better in my safe! lol 😆 I ❤ it!
PSR🔥🔥🔥🔥🔥🔥🔥
I want it
Make another video of zastava m77 an update video how many rounds u got thru it now?
Really haven't put a lot of ammo through it little too expensive to do that
Ha that is the group size I get at 30 yds with arsenal ammo
Well looks like she passed so far👍
So, Riley or PSA?
Klay, I was looking forward to the continuation of this series. I'm not an AK guy, so I dont really have dog in the hunt regarding U.S. vs overseas manufacture of AKs. As I've mentioned before I have one AK'esque rifle, and it's an IWI 5.56 Gen 1 Ace modified to R-N-L by Dissident Arms. Its a nice rifle. IMHO, as long as a rifle is 'combat accurate' and goes bang when you pull the trigger, its a good gun. I think the 'Riley Krink' meets that criteria. Most firearms require a 'break-in' period, I usually put a minimum of 200 rounds through any firearm I plan to carry. If my memory is correct, youve had one FTFEED and that was with some questionable ammo and magazine. It looks like the first 505 rounds got all the moving parts seated-in correctly. The video made me check a few of my guns for metal movement and deformation. Guess what? They all exhibit some deformation. Its the nature of hardened steel when slammed with force against another piece of steel to deform a little. Keep up the good work! Thanks!
You had a failure to extract on the last round of the 20 rounds of subs at least it was the last round 😂awesome content as always
Yep Subs gonna sub
Klayco running AK's
Automatic upvote.
I have an unfired RAK-74, first thing out of the box, I noticed was how gritty it was to manually cycle the rifle. It was so rough, the bolt would catch and stop on the hammer face.
First thing I did was install an AKT-UL Ive been sitting on for years and an ALG AKrecoil spring.
Super noticeable difference when manually cycling the rifle! Can't wait to get it out to the range
Bolt carriers riding the hammer face is super common.
@@Tk210ismyeah I’ve got that even on my arsenal’s and they’re supposedly the “higher end” aks. Bullshit by the way. They are not worth the money unless you get one like $400 under the price tag.
You going to shoot a match with the full size beryl?
Already did a while back video should still be on RUclips
Where can you even get alg triggers these days. They always out of stock
Nice 29 round mag!😏
20 years from now theres gonna be a used market full of guns owned by RUclipsrs that will be sold with the disclaimer that a new barrel is needed
Risking it for the Bizkit!!! LOL
Which ALG trigger do you like?
Whatever is cheapest
The concussion will clear your sinuses! Damn! Lol
Is that a Putnik in your Pouch, or are you just happy to see me? 😂
Whats the reason you dont run krinks at the competitions you post on yt? Is it because they’re obnoxious or Is it performance based?
Literally just got done filming the head-to-head at a competition with both of them today
@@KLAYCO47 cant wait to see how you did and your thoughts
First one!! Wooooo
I’ve never been able to use the big brakes. Some of them feel like your getting slapped upside the head
Bro's got the Martin Luther King edition Magpul stock 😂
the Bulgy plum grips handguard set wont fit w/o ext. mods. they told me at riley no problem. b.s. and also 3 diff mags not lock in polish, bulgy waffle, and serbian, and krink booster original old style factory does not lock in either. tried 3 different. pin lock up and threads for tight fit{serb,russian,Bulgy don't work.and one u.s.a. model. oh yeah have had every model of AK for 50 years.full autos and semi's so know what i am doing..However guess what fits, the serb. 60 rd mag. THIS ONE is. strange.won't be a zombie apoc gun for me.UNLESS WITH A SACK OF MAGPUL MAGS HA HA thanks for adding more vids.
How difficult was it to make that Waffle a 20 rounder ??
Bad element co did it.
Glad to see this is holding up. AK bolts get weird. My SLR 106 which was basically brand new when i got it. By 500 rounds bolt looked really worn. A couple thousand later bolts basically in the white but material isnt moving. Conversely the SLR104 i traded for the 106, took 20k for the bolt to look similar. The AMD65 thats been in mine and a friends hands since we were kids and has god knows how many rounds through it still has finish.
Another thing is American steel isnt the same as combloc countries were using. The wear patterns are going to be different from an import AK. As long as you arent closing on a field gauge send it. It's not even unusual for AKs to close on a no-go and be fine. The field gauge is the real important once that will tell you if headspace is fucked.
3:24 Yuckkkk 🤢 Too late.
Get that triangle stock back on there! 😊
Blammo!
Your safety is jumping around. I would make sure to check the video, if you get a malfunction. I know that was a malfunction in a previous video, but you didn't catch it or mention it.
That waffle 20 is a vibe
No, that is normal. It is wearing in as it should.
Like I said I think riley is the way that thing is flamethrower 😂 if they listen to the ak community riley will go far 💯💪🔥✊️
1
You want me to fix that real quick? 😅
Honestly bugging the piss out of me how everyone is coming out with krinks now chambered in anything but the actual krink round
I mean people are in the business of selling product. Kind of silly to not make products chambered in the round that's available right now.
"We had no malfunctions." 13:19 😐
Subsonic ammo dude it malfunctions in everything
Second.