These look to be the older FMA GPNVGs. I can tell by the bridge, this bridge looks like the ones used in the early versions of the GPNVG, made known by DEVGRU who now uses the PVS-31D. The newer bridge is completely flat and a bit bigger. If you look at the GPNVGs with the anvis mount, that bridge is the newer version has
Sucks to hear that they’re distorted if you look through them, is it also the same for the PVS-31s from TMC as well? Although I don’t really mind the GPNVG-18s, I honestly prefer having the binocular NODs more due to them being more lightweight in general.
I have the FMA NVGs and the blue lenses are the problem since they are inverting the image. I've tried taking them out but the outer lenses shake around too much so I'm trying to find a solution
@@CallsignSAVAGE Can you keep us up to date on that? I want to buy a set too but I want to be able to look through them. That's what keeps me back from the FMA ones
@@avengergames3051 Bought FMA, removed the blue lens and the rear and I can see through them. Screw the black rings of the lenses further back to trap the lenses together and not make them move and rattle
@@ExtraordinaireThe Ah no worries. Thanks for the reply. Just thinking about picking one up so I was curious how it preformed. If you're looking at playing around with night vision on the cheap you should check out some of the stuff they're doing with the PVS 69.
It’s depends on are you live. If you live in the west, it’ll take around 1-2 weeks, Midwest is sometimes 2-4 weeks but around the far east it could take a while
Hey, I hope you’re still reading these old comments. I’m pretty worried because I had ordered the metal L4G24 and the nods a couple days ago and they should deliver it to me in a few days. Did you manage to fit the nods into the mount? If so, how? Please answer because it kinda made me worried lol
Another question, how does the mount look REALLY? Does it look cool for you and other people seeing it? It seems a bit “goldey”, idk if its good or not
@@ExtraordinaireThe what do you mean NEWER gen wilcox arms? I think I have the exact one that you have (looks a bit more goldy than tan), so does it look right with the nods even with the colour difference?
Service member here… hopefully most of the stuff you had on you helmet is gone. I’d lose the light on the left and right, the ir light on the side since you have the main back center
I think it's fine, just depending on his light setup. Flashlight could be white light and the princeton could be IR. The rear middle is IR strobe I'm pretty sure, and his S&S Precision V-lite could be red or green. Pretty solid bucket setup even if it is a tad on the heavy side! Pretty similiar to some SOF guys setups, which is probably what he was going for. I understand it's for airsoft and most of it is probably knock off, but still.
Were you one of the guys booting in doors with a pair of quads on your head? cuz I’m not gonna sit here and let some bootfuck 11B tell me I can’t enjoy my hobbies
I'm spending 500 on airsoft gear and I thought, Night vision is sick and I bought a 72 dollar airsoft version and a entire set up for all this so this is sick
These look to be the older FMA GPNVGs. I can tell by the bridge, this bridge looks like the ones used in the early versions of the GPNVG, made known by DEVGRU who now uses the PVS-31D. The newer bridge is completely flat and a bit bigger. If you look at the GPNVGs with the anvis mount, that bridge is the newer version has
Ok
They use PVS-31A
@@EL_Pivio no, they definitely use the 31D
The man's back!!
And he’s gone!!
its crazy bro i been watching you for years i haven't even played airsoft in 3-4 years
Sucks to hear that they’re distorted if you look through them, is it also the same for the PVS-31s from TMC as well? Although I don’t really mind the GPNVG-18s, I honestly prefer having the binocular NODs more due to them being more lightweight in general.
@@accel_slim That really sucks. If only there’s a way to get better lenses that aren’t terrible distorted.
Try taking those front lens out of the nods to see through it aswell as the back if required, that should work. Keep up the good content
Thanks for the tip!
I have the FMA NVGs and the blue lenses are the problem since they are inverting the image. I've tried taking them out but the outer lenses shake around too much so I'm trying to find a solution
@@CallsignSAVAGE Can you keep us up to date on that? I want to buy a set too but I want to be able to look through them. That's what keeps me back from the FMA ones
@@Mr.Nobody01211 buy Spartan gpnvg-18, you can actually see through them
@@avengergames3051 Bought FMA, removed the blue lens and the rear and I can see through them. Screw the black rings of the lenses further back to trap the lenses together and not make them move and rattle
fma is absolutely amazing
now THIS is something i would pay 50,000$ for.
There airsoft I think there like 145-200
Nice piece i got pvs31 led version from fma too😎🤙
I was looking for some goggles for cosplay and these look great
El casco táctico broo❤😍
Desde criança eu quero ter um capacete desses mais nunca consegui comprar , oq eu posso fazer e ver essa maravilha em videos😊
what is the mount you are using for the night vision.
Mine just arrived in the post, had the same issue with not being able to attach them sturdily. Any suggestions? Xx
This my dream nvg for when I’m out of college
i love the benchmade
did you get it to fit in the mount properly? and what brand/manufacturer is that mount from?
The L4G24 is made by MF. With some force, I can get them to lock in. They're plenty secure then.
@@ExtraordinaireThe Could you link the mount?
is that mount from evike as well?
whats the view like from the contour on that mount? any different to just velcro on the side?
Not really
We can modify these if you remove the tubes and replace with Night vision the thing is I cant find any easy way to get a tube.
Cool!
does anyone know how to make it so you can see through the prop nvg
I got these and I’m going to try to convert them them into a working pair ( Digital ofc)
How is the IR on the SOTAC vampire head? Also how is the MAX mount holding up?
I don't have NODs to test IR, sorry.
M-Ax mount is holding up so far!
@@ExtraordinaireThe Ah no worries. Thanks for the reply. Just thinking about picking one up so I was curious how it preformed. If you're looking at playing around with night vision on the cheap you should check out some of the stuff they're doing with the PVS 69.
I have the sotac ir head. It's pretty good for close range stuff under nods, for the price I'd definitely buy it again!
What helmet is that? Air vents on top..sorry missed that video
As always.great content and keep them comming 👍
TMC replica of the FAST SF Carbon Helmet
Is this Night Vision working our it for decoration?
What mount is that?
Hey, I just ordered these, and I was wondering how long does it take for this item to arrive?
It’s depends on are you live. If you live in the west, it’ll take around 1-2 weeks, Midwest is sometimes 2-4 weeks but around the far east it could take a while
What helmet is that?
How bright is the red glow from your SOTAC m300v in low light conditions? Thinking about if i should snag one or keep my streamlight side winder
My M300V doesn't have red light. It is White and IR.
@ExtraordinaireThe Right! I should say, when you put the SOTAC m300v in the IR mode (in dim lighting) does it give off a faint red glow?
Im thinking of buying GPNVG dummies and All the mounts are plastic, is that a good choice I don't want the mount to break
bravo six going dark
How much for full setup like you??
How do I I mount it from my mount tho
Is this the LED version?
This is so kool
Anyone aware of how to change out the front lens cause I can’t get it off
👍
Hey, I hope you’re still reading these old comments. I’m pretty worried because I had ordered the metal L4G24 and the nods a couple days ago and they should deliver it to me in a few days. Did you manage to fit the nods into the mount? If so, how? Please answer because it kinda made me worried lol
Another question, how does the mount look REALLY? Does it look cool for you and other people seeing it? It seems a bit “goldey”, idk if its good or not
I can get it to lock in with some force. It's just a really tight fit.
I like the color, it looks right to the newer gen Wilcox arms.
@@ExtraordinaireThe what do you mean NEWER gen wilcox arms? I think I have the exact one that you have (looks a bit more goldy than tan), so does it look right with the nods even with the colour difference?
@@pacoradon There have been several variations in the anodized color of the real L4G24s. The dark gold/tan color is relatively recent.
@@ExtraordinaireThe so technically I should be good since the goldy color is more like the real mount, right?
Can you actually see in the dark or are they js for display?
It’s for cosplay. If you want a working one it’s $40,000
or you can wait a couple months as a digital night vision company is dropping quad lenses. Priced around 2k I think.@@RandomguyFr37
would it be possible to maybe add lights in the tubing? and also un-distort the image
Yes its possible, I'm pretty sure true mobster did it in his cod irl video
I just looked at their website, as I saw the night vision I was suprised by the 40 dollar price tag but then I saw the mount, its 145 dollars😫
SOTAC sells one on AliExpress that looks just like mine for $50.
Does it work?
Good video as always
you should add another flashlight to counterweight your counterweight
👍👍👍👍
ok
Are we putting a CR123 battery in there? How do we install it?
These are non-functional
Is the fma battery box a dummy?
Yes
Cant you buy a kit to make these actually work
i always wanted to know, why they have four glasses?
Wider FOV
How much is the knowledge vision goggles cost I need to know how much money I need to get the bills done
We also have the NVG， like pvs18,pvs14......
Are you the guy form scp overlord
I have the same but black
Yo do these light up green?
Nah
Service member here… hopefully most of the stuff you had on you helmet is gone. I’d lose the light on the left and right, the ir light on the side since you have the main back center
More lights looks cooler.
I think it's fine, just depending on his light setup. Flashlight could be white light and the princeton could be IR. The rear middle is IR strobe I'm pretty sure, and his S&S Precision V-lite could be red or green. Pretty solid bucket setup even if it is a tad on the heavy side! Pretty similiar to some SOF guys setups, which is probably what he was going for. I understand it's for airsoft and most of it is probably knock off, but still.
You make me jealous
I ordered the same thing off Amazon but it came with a mount
Which one did you order? I’m trying to order one too
Dang.
How much that NVG?
We also have the NVG， like pvs18,pvs14......
Normal unboxing video in america:
GPNVS 18
what is the point of this helmet?
To look cool as hell, what do you mean?
Bro the real things are like $14k
Holy helmet weight Batman
Holy weak neck Robin
@@ExtraordinaireThe nah just don’t out unnecessary shit on my gear 😂
@@onionjohnny6572ok bro
You can take off cover
How much do those cost?
We also have the NVG， like pvs18,pvs14......
Anyone know where I can buy the battery case
We also have the NVG， like pvs18,pvs14......
How much didi it cost
We also have the NVG， like pvs18,pvs14......
Does it actually work?
Nope!
You have too turn them on in order for them not to be as distorted
He just spent $40,000 on quads💀that's crazy
Edit: if those are real military grade ones
$40K? They could have at least wrapped it in bubble wrap
@@natecarter9202 there not real tho
@@FlyHighTabor Ahhhhh. Well ok then. Thank you!
works?
Lmao. No.
from "e" what
Hi
Hey
40,000
How much?
We also have the NVG， like pvs18,pvs14......
Guns 18
bro damn it’s a helmet why you adding so much weight
You got a weak neck or something?
Can u see threw it tho
Just got it and you can’t see anything out of it, It’s distorted.
@@RandomguyFr37 there's a video about how to fix that
@@Nobody_Imp0rtant can you tell me what it’s called?
what is the vid bro
@@Nobody_Imp0rtant
I don’t see the point of getting these bulky things especially since they don’t actually do anything. 😅
We used stuff like this for SCP: Overlord. I have my helmet displayed and it looks cool as hell, so.
*Promosm*
$$$$$
for 17k , the package looks shitty.
what no picture footage waste of time
these are dummys idk if anyone realised that, the actual ones are about 40k usd each
Love watching these kids play soldier......instead of actually doing it for real.
Thanks for watching!
Yeah doing it for real is really fucking gay
Is that you dakota meyer
Were you one of the guys booting in doors with a pair of quads on your head? cuz I’m not gonna sit here and let some bootfuck 11B tell me I can’t enjoy my hobbies
you can't even get your pfp straight, glass house throw stones bud
Way too many lights and looks ridiculous!
ok
Dear God, get a life
This is the most boring unboxing video i ever seen
Abi silah adı nedir yani modeli nedir?
I'm spending 500 on airsoft gear and I thought, Night vision is sick and I bought a 72 dollar airsoft version and a entire set up for all this so this is sick
I got these and I’m going to try to convert them them into a working pair ( Digital ofc)
Let me know what you use and how you do it because I’m planning to do the same!
How much did it cost?
$40
Do they work or just for looks
For looks @@mikewilliams1993