World's first GPNVG-18 dummy to functioning model!
HTML-код
- Опубликовано: 13 июл 2020
- This is a film that makes the dummy to functioning model.
I used fma gpnvg 18 deluxe model.
Some parts were 3d printed.
stl file is download from the link below
drive.google.com/drive/folder...
/ tagart1
#gpnvg18 #zerodarkthirty #conversion 
Спорт
That's $16,000 in tubes alone, assuming they are Gen 3.
And since resin printed plastic is extremely tough, this guy just made an actual ground optimized panoramic nightvision system, with more research on lenses, merging the two tube image projections together, he'd essentially have made a GPNVG-18.
When there's a will, there's a way.
Also works when you have tons of money to spend on expensive tubes.
I frickin love you man.
i think this dude would have bought the real deal if they allowed him to buy like you said he already drop at least 20k usd in parts and labour and it probally doesent perform as well as the real deal but damn its impressive his able to do that.
Resin plastic is actually more brittle than FDM. I'm pretty sure he used SLA for high dimension accuracy so when you adjust the focus, they don't feel like crap and there is little wobble to reduce impact damage to the tubes. Some resins are almost as tough as FDM, but FDM is stronger unless improperly printed.
@@DaveSmith-cp5kj yeah, still learning a lot about 3D printing, resin is accurate but isnt tough I should say.
@@julian23561 i know its not the same but i own a 3d printed monocular nod, but it uses a bigger tubes than 10160 style, its helmet mounted, if i would run in to a wall its going to self disassemble but it has taken a few drops. i think if this guy is careful he will be fine
not really you can get a gen 3 Elbit XLS WP tube for like 2k so it would be closer to 8k in tube cost assuming he bought brand new tubes.
Good work man, you deserve credit for this hard work. I do similar work and it is very time consuming, not many can appreciate the art that goes into this. Congrats and even bigger shoutout for sharing it with the world!
Oh hey! And look at where you’re at now. Happy for you m8
You should try inserting some small magnifying lenses into the eyepiece so the screen will become much bigger.
Stoked, I had this idea before, glad to see someone did it
an easy way for those who wants to make could be to buy some nv cameras and drop them in each tube to make some semi-functional nvgs just make sure that the cameras are small enough
항상 놀랄따름입니다 더미사서 저도 해봐야겠네요!!
Saw Laown 출력만 잘 나오면 만드는건 어렵지는 않습니다.
So freakin awsome new subscriber here
진짜 장난 안 치고 또 역작 하나 뽑으셨네요....
감사합니다. 개인적으로 재미삼아 만들어본거라 마무리작업이 시원찬습니다.ㅎㅎ
That's amazing, all we need is collimation
언제나 양질의 영상 감사합니다! 저번에 만드셨던 PVS31도 영상증폭관때문에 가격이 꽤 나갈텐데 이번엔 GPNVG라니 ㄷㄷ... 만드실때 돈이 엄청 들었을 것 같슴다.
안녕하세요.
시청해주셔서 감사합니다.
영증관은 돌려가며 사용하고있습니다.
그래도 4개 금액대가 ㅎㄷㄷ 하긴합니다.
@@tagart9780 역시.... NVG는 알맹이가 진짜 비싸네요... 질문이 있는데 만약 러시아쪽 증폭관 구매하고 ebay나 어디서 nvg 하우징, 렌즈를 구매하고 직접 조립을 한다면 실제 작동이 될까요?
@David Stunning 그러게요.... 일본쪽 알아봐야할 것 같네요
대단하십니다...
이건 아예 금손이나 그런 것의 영역을 벗어나셨는데요 ㅋㅋㅋㅋㅋbbb
제일기대하고 있는 장비 입니다!!
잘 준비해서 만들어보겠습니다~
I'll pay you to make these for me
me to
@@BigPom-fk8re what the shit... *honey, we aren't going to get that car you wanted this year*
@@BigPom-fk8re Honestly, imho 40.000$ for just FOM1800 is an insult. You are way, way better off sticking four PVS14s all with FOM2300 in there. They cost 10.000$ each so same price, with the only downside being they might get a bit heavy if you don't improvise and fabricate a harness to take the weight elsewhere on your body (backpack?). It's expensive but doable. Kudos for this vid making the start!
@@orestislazanakis4960 TNVC is finally selling GPNVG-18s to civilians without restrictions for $40k a piece. So save up and get those tubes.
@@orestislazanakis4960 one pvs 14 for 10k ?
아니 이런 3D 모델링은 어디서 배워서 어떤 프로그램으로 하시는건가요? 그리고 3D 프린팅같은걸 하시고 거기에 갖고계신 기술을 가지고 저런걸 만들어내시는건가요? 제가 꿈꾸던 그런 기술을 갖고계시네요 와.. 입이 안다물어집니다..
와... 그냥 대단하신분!!
그냥 할줄아는걸 할뿐입니다.ㅎㅎ
@@tagart9780 네이버 샵에서 몇번 제품을 구입을 하고(얼마전엔 마스크를..ㅎㅎ) 낯이 익은 이모티콘과 상호명이 있어서..클릭을 했었거든요.ㅎㅎ
대단하십니다.~!!^^
에어소프트TV [Callsign_TERRA] 그러셨군요. 취미와 업을 병행하고있다보니 이것저것 하고있습니다. ㅎㅎ
Could you make a full video please?
Bro, amazing
That's crazy how you could do this man.
어마무시한 녀석을 만드셨군요. 열정취미가 입장에서 보면 그냥 대단하고 부러울따름입니다^^ 하루빨리 제품화 되길 간절히 바랍니다~!!
Thank you!
What you using for the dove tell because its not the same as the fma one and the rail looks better can you help
What optics are you using? PVS14 objectives and eyepieces?
Very interesting
good morning Sr @TARGAT I'm interested to know if you do these kinds of projects for the public, I have a Dummy night vision and I'd like to know if you would make it real gen2+
How did you make the front and rear lenses?
Bro excelente trabajo la verdad estoy muy impresionado y tengo algunas preguntas sobre este proyecto
정말 멋진 물건입니다. 늘 영상 잘 보고 있습니다. 상품화 기대하겠습니다 :)
상품화하여 판매하실때도 3D프린팅 제품으로 판매하실 계획이신가요? 아니면 시제품이라 3D프린팅 된 건가요?
Asterisk 일단 쉽게 접근할수있어서 프린팅한것이고 여러 상황을 고려중입니다^^
@@tagart9780 답변 감사드립니다. 영상 늘 챙겨보며 많은것들 배워가고 있습니다. 상품화 시 꼭 구매하고싶네요
Awesome vid man! Which image intensifier tubes did you use?
I used F9800 model(pvs-14 size)~
@@tagart9780 great, thank you!
@@tagart9780 What optics are you using? PVS14 objectives and eyepieces?
How much did the parts cost and do you have a parts list or could ya build one and I buy it from yea if it’s actually cheap
What leans are you using inside to get magnifications
What risen did you use for the housing since I know some resins are not strong enough to take impacts or falls if the nods break way from your helmet might be devastating.
A really durable one is the phrozen onyx pro rigid resin
Something glass-filled would be ideal
Hello, do you happen to have a step model of the mousing for customization?
i’m going to make a digital night vision version of these
What Image intensifier tubes you put inside?
I have some FMA’s, how much would you charge to convert them like yours?
You can do it on your own if you enough money and know a bit of soldering, 3D printing and electronics. You also need to buy 4 Intensifier tubes, which can cost $2000-4000 each.
@@julian23561 you can buy BLEM tubes for about 500 a piece if you wanna cut corners that aren't so bad.
Can you do it for other replicas also?
Hi, where you get the lenses?
따라서 만들어보고싶은데 어떤렌즈를 사용해야하나요?
What tubes are you using ?
What lenses did you use? Their focal length and size?
Most homemade use 38mm diameter with a 50 mm focus distance easiest to aquire and good quality for price.
Can you upload the button parts as well?
혹시 동사의 ANVIS타입의 GPNVG-18은 작동형으로 개조가 가능할까요?
What lenses did you use??
I’m just wondering how you got the lenses for these things
same
but do they work. because on camera it looks out of focus.
Have you put your 3D printer Blue prints up anywhere? I’m in Australia 🇦🇺 we cant get the good stuff....
drive.google.com/drive/folders/1GlE4JOm_3x31eBNy-QiUmmEqekIhOo1T
@@tagart9780 cheers mate!
I want to know more about the lenses used
How did he make the image intensifier
Does it actually pic up infrared light
단안식, 양안식, 4안식 전부 제품화가 된다면 DIY 형식으로 커스텀을 하는 방식일까요, 완제품 형식으로 나오는 방식일까요?
가격대 형성도 궁금하여 여쭈어봅니당
항상 잘 보고 있어요!
안녕하세요, 제품화되면 완제품으로 나올것이고요. 가격은 지금 단계에서는 아직 말씀드리기 어렵습니다.
야시경에 가장 큰 금액적부분을 차지하는것이 영증관인데 이건 오리지널이나 레플리카나 어찌하지못하는 부분이거든요.
@@tagart9780 자세한 답변 감사드리며 좋은제품 기대하고 있겠습니다 야시 장비 시장 개척에 앞서 나서 주셔서 감사합니다
Don't the two tubes need to be closer so that the image blends together?
i thought so to myself they are really far apart
No. What these lack that the real ones have is an image collector prism on each side. If you assign about $4000 to each gen3 white phosphor intensifier tube you get $16,000 instantly. The body of the units are the same sort of polymer as a pmag or a peq15. About $400ish worth of high grade plastic. A few hundred dollars more for the crossbar mount. A bit more cash for the wiring, switches and etc... So we now have around $18,000-20,000 in the unit cost. Where does the rest of the $40k price tag come from? The prisms. They are unobtanium from fucking space. With the prisms you get one clear slightly fisheyed picture. Dude did a great job on these but there is almost no cost effective way to purchase or build those prisms as a regular person. At least not a way I am aware of. Hope this was somewhat informative.
@@sambumgardner3480 gpnvg 18 are gen 4 tubes not to mention the r and d to make them blend in seemlessly stich the visual from each tube to a clear 97 degree field of view and its combat tested its also only sold to military and goverment so the price is inevitably higher without proper mass market adoption and company desire to make profit its no wonder why they cost 44k usd.
@@patthonsirilim5739 there's no such thing as gen 4 tubes (yet). The image intensifiers on GPNVGs are Gen 3 L3 tubes (either thin filmed Green or unfilmed white phosphor tubes), and the previous reply is correct, the only difference is that they have an image collector in the form of a prism to create the "3 bean pod" image that you get when looking through one of these. Watch Lucas from T-Rex Arms video on one of these, they use standard L3 tubes that you can buy right now, the image collector prism is what is the special about these.
@@patthonsirilim5739 these are also heavily regulated but you can own and buy one as a civilian if you're connected enough, if you know some people that know some people that know some people, or you pick one of them off of a truck.
How do these work in person? Theres no image collector for the two tubes to make a single image so you're seeing two images per eye rather than two tubes making one image per eye.
It works well.
Looks like the link below, almost.
images.app.goo.gl/u4X3cWbtUz857rsC9
I just built this, and it basically works like a binocular system, but with two circular views on the edges. So it is like you are viewing through three circles. This does mean there is a thin column of blind spot between the center focus and the two side circles. I'm currently experimenting with some 3D printed prism designs and plan to try to make an image collector from borosilicate to see if I can help remove the blind spots. As is however, it is a significant boost over bino setups, you just need to be aware of your blind spot and keep your head panning slightly so you don't lose awareness of what is in your blind spot. Its not as big of a deal breaker as you think.
Before that though. I think I am going to duplicate the bridge with a zamak or reinforced 3d printed design as the original plastic seems a little flimsy and the wilcox dovetail is out of spec (and I don't trust the chinese made G24 mounts)
@@dre8134 There is no low end version. You have to buy the tubes which are gen 2 minimum. It is a $5k project.
If you don’t mind, what did you use for lenses? I’m working on a design that uses ANVIS style lenses.
@@DaveSmith-cp5kj what glass did you use for this?
Which image intensifier tubes did you use?
That’s what I’m tryna find out
@TAGART what tubes are these using?
i used f9800 type gen3
A BOM would be nice
Where did you buy the MCP?
I literally want that shit
How much are they and where can I buy them
Where can I find the files for these
Can I ask, is this able to be adapted for any Image Intensifier tubes?
Yes. possible.
he just did it in the video
@@Eljanes123 He means other tube specs like 11769 (the PVS14 tube)
@@DaveSmith-cp5kj i think he used thos, all tho i would use the 10160
how much would this cost to make in total?
알고리즘에 떠서 봤더니 한국인분이셨네요 진짜 대단하십니다
You could make a fortune off of making these. Do you by chance, take commissions? I would love one of these, preferably without the $40k price tag.
👍
dude awesome, thanks for STL share. Did you make Wilcox nvg mount for 3d ? / I need a fast helmet parts stl, anyone share with me ?
Did you buy the tubes or made it yourself?
you cant make the tubes yourself, he used proboly 10160 tubes, same ones that go in to a pvs 14
나오면 살의향이 큽니다. 상품화도 노리신다니 더 기대되네요.. gpnvg는 현지에서도 세금을내야하고 가격도 비싸다던데 어쨌든 에솝용으로 풀린다니 기대됩니다..ㅋ
에어소프트용으로 제작되는거라 오리지널과는 성능상의 차이가 있을수있으나 가성비측면에서 원래취지인 넓은 화각의 장점은 그대로 가지고 가는 제품으로 방향을 잡고있습니다.
TAGART 그래도 에솝용으로 풀리는게 중요하죠ㅎㅎ 사실 국내는 야간전이 흔하지 않습니다.
그래서 고가로 젠2 3 사더라도 많이 안쓰니 사기 꺼려지는데. 이친구는 얼마로 책정될지 모르겠지만 기대됩니다..ㅋㄱ 올해안으로는 힘들겠죠?
Where do I sign up
Can you make a working sample?pls.
@TAGART what IIT are you using ?
I used f9800 model
@@tagart9780 Sweet as Thank's
And were did you get the front and tear lenses for the nods you made im gonna build this for myself
@@coyote-son9836 The lenses, I made it.
My job is optical and mechanical design.
@@tagart9780 Not sure how im going to get/make the lenses but thanks anyways
정말 대단하십니다. 더미 GPNVG-18을 가지고 실제로 작동되는걸 만드신 분은 처음봅니다.
영상을 보면서 궁금증이 좀 생겨났습니다. 답변해주시면 정말로 감사드리겠습니다.
1. ruclips.net/video/z65af104M7U/видео.html 실제 GPNVG-18을 보면 양 영상증폭관 사이의 거리가 짧은데 영상에선 약간 떨어져 있는 걸로 보입니다. 그래도 넓은 시야각이라는 이점을 원활히 누릴 수 있나요?
2. 영상증폭관에다가 전원만 공급해주고 들여다보면 야간투시경처럼 볼 수 있는건가요?
3. 초점 조절도 가능한가요?
4. 이것과 관련해서 상품화 하실 계획 없으신지요?
NV Holic 안녕하세요.
바로 답 드리겠습니다.
1. 영상증폭관 거리는 오리지널과 동일하고, 오리지널은 지름큰 렌즈를 잘라붙여 영상이 눈사람처럼 보이나 제가 만든건 간단하게 만들기위해 지름이 작은 렌즈를 사용해서 8자로 보입니다.
오리지널은 그래서 파노라믹이라는 이름을 사용합니다.
제가 만든건 정확하게 눈으로 보는 1인칭 시점으로는 정 원이 3개 보입니다.
당연히 시야가 넓은 잇점은 그대로입니다.
2.영증관에 전원만 공급하면 정상적으로 볼수없습니다.
gain컨트롤때문에 포트단자가 달려있는데 이는 회로기판을 거쳐야되고 회로기판이 없으면 엄청 밝은 영상(이미지가 구분가지않을정도의)으로 사물을 구분할수없습니다.
저는 회로기판없이 간단한 다이오드로 정상작동할수있도록 사용했습니다.
avs시리즈에 들어가는 영증관이 그런 개념으로 제작되어있습니다.
3. 초점조절 가능하도록 만들기위해 렌즈모듈부를 설계해서 제작했습니다. 당연히 초점조절가능합니다.
4. 상품화 계획이 있어서 이것을 만들었습니다!
자세한 일정은 미정이지만 상품화를 위한 초석이라고 보시면됩니다.
@@tagart9780 오! 그럼 그 상품은 민간판매도 가능할까요?
NV Holic 당연히 에어소프트마켓용 입니다
anvis 9 !!!
이거 그냥 더미인가요 아니면 미묘하게나마 효과가 있는건가요?
김영민 더미케이스에 영증관과 렌즈를 심은 제작품입니다.
Hello, do you mind sharing the circuit diagram?
jengz
Dude you should sell these things
Can you make one and sell it? That would be awesome
You sale it?
Can someone explain how to build this?
While we have access to GPNVGs we'll put money down for you to build some sets for to test.
렌즈 문제는 어떻게 해결하셨나요???
렌즈는 제가 만든것과 굴러다니는거 조합했습니다.
Awesome, this is work on dark Full?
Night Vision uses the ambient light to amplify it into an image through intensifier tubes. It would sort of work but it wouldn't be perfect because theres not enough ambient light. thats where IR Lights come in handy.
@@tacticalfacepalm20233 thankyou, How i buy this project?
Can I get a STL file
I wish I could do this.. but I really want some white phosphorus ones. Don't even know what they are called
do you mean the tubes or the actual nod?
If you mean tubes they are usually called the same as green standard ones only they have "white phosphorus" included in the name.
If you mean the nod itself, they are called GPNVG - 18, or "the forbidden noodles".
@@MarshallConway "forbidden noodle" lmao, I've never heard them called that before, but I like it.
@@MarshallConway not any more tnvc started selling them to civis
@@MarshallConway what's the name?
양안 모델도 양산판매 계획잇으신지 궁굼 합니다
pvs31모델로 계획중입니다.
@@tagart9780 빨리 소식나오면 좋겟네요!!!
접안과 대물렌즈는 어떤것인가요?
kkj k 글러다니는 샘플렌즈 사용했습니다.
@@tagart9780 따라서 만들려면 어떤 렌즈를 써야하나요?
kkj k tagart1911@gmail.com으로 메일보내주시면 관련정보 보내드리겠습니다
now do it with gen 1 tubes
How to order your produk
Make my Gpnvg 18 dummy to a real Nvg brooooo xD
In terms of cost... How much did you spend making these guys? Cause I can already imagine you saved a ton of money and problems making your own gpnvg instead of buying it.
The only real cost is the IIT, which cost me $7,200 total. I had the tube lying around though. His design however has the flaw that there isn't a prism so the images are not joined together and you have two big black bars on the side of the main image. I would not go out and buy tubes just for this build, Kommandostore has a complete pano kit already made for $13,500. Which has a real prism like the real thing.
@@DaveSmith-cp5kj Gor any link?
당신의 nvgs에서 어떤 렌즈를 사용하고 있습니까? 당신의 파일에서 이것에 대해 아무것도 볼 수 없습니다. 저를 도와주실 수 있나요?
hi, how can i do it at home?
You mean an DIY version?
Strap more tubes for 180 fov lmao
:)
Bro just sell these already DAMN
Would you sell these?
Probably no
And a Nerf gun sniper
혹시 언제 출시되는지 날짜 알수있을까요?
출시일은 아직 미확정입니다. 제품 특성상 시기를 확정지을수가 없습니다.
@@tagart9780 그럼 이번 연도 안에는 힘든가요?
@@user-is9ck1hq7w 네. 내년 출시계획입니다.
@@tagart9780 좀 있으면 3월인데 혹시 출시 날짜 정해졌나요? 만약에 출시한다면 금액대가 어느 정도 일까요?
@@user-is9ck1hq7w 제작단가가 워낙 많이 소요되는 제품이어서 아직 준비중입니다.
상품화가된다면 구매하고 싶습니다.
상품화가 곧 됬으면 좋겠네요
Noplice 상품화를 위한 초석입니다~
@@tagart9780 Would love to see more videos, especially through the tubes, in conjunction with an IR laser if possible. And also if you do commercialize it, what would the possible price point be? And any issued do you think with shipping to US? I'd be very interested in this even as a budget NVG intro considering it uses actual intensifier tubes....only matter would be ensuring the housing can take a little use here an there ya know.
실례지만 혹시 성이 스타크 이십니까
😁😁🤟
Can you do commissions? I can pay
That'll be $20,000. lol.
@John Smith some people, not most.
make thermal vision
Look, we've all seen the Predator too, but in real life thermal vision would actually suck in an airsoft/wartime environment.
@@RavenDrakearud can he pull it off tho
@@172ontop actually, probably. FLIR cameras are getting smaller and cheaper by the day and you can buy FLIR modules that plug into your phone, so either buy those or the sensors and put that on a board for video pass through and bam. Slap an OLED in there and you're golden.