4Runner Propeller Shaft and Spider Joint Greasing. Don’t Overcomplicate It.

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 28

  • @davidschlarp1606
    @davidschlarp1606 4 дня назад

    Little tip. Chalk the wheels and put it in neutral. Then you can turn the drive haft by hand to get to the zurk fittings easier

  • @tomphillips2608
    @tomphillips2608 Год назад +3

    Anybody running Falken Wildpeaks knows his stuff! Glad you only pumped 2-4 pumps on the slip yoke zerts. You can overburden the seals inside these units. Good content on your vids, subbed!

  • @claudinepatrick523
    @claudinepatrick523 Год назад +4

    Good video. One item I’d correct. Never mix polyurea grease with lithium grease. Doing so can actually be worse than nothing. You can get a reaction between those different greases that creates a rock hard substrate that will destroy the bearing surfaces. Use the type of grease in the video. Do not substitute with polyurea ever.

    • @OtisFlint
      @OtisFlint 4 месяца назад

      This, 100% this. If you're going to use Polyurea, you have to strip every last molecule of lithium grease out of the item you're greasing first, but then you can double the service interval. To me, not worth it.

  • @DKits73
    @DKits73 Месяц назад

    100 percent correct my 08 4Runner manual says you can use moly lithium chassis grease NLGI #2 OR lithium base multipurpose grease,NLGI NO.2 for the slide yoke AND FOR THE SPIDERS lithium based chassis grease NLGI NO.2 SO This grease along with many other brands covers both..it does not say to use moly grease on the spiders probably wouldn’t last as long

  • @americanmade422
    @americanmade422 Год назад +2

    I just did my 4runner with this grease. I also used it on the ball joints. It's a good grease. I did so much research and spent days. It was a nightmare. Lucas red n tacky for the win!

    • @TwistedJake
      @TwistedJake  Год назад

      Presuming you have a gen or aftermarket greasable ball joints??? I just replaced my entire UCA this weekend.

  • @OverlandPNW
    @OverlandPNW Год назад +2

    Good video! Thanks for giving everyone a definitive answer on the kind of grease issue!

  • @serendipityguy
    @serendipityguy Год назад +1

    Thanks a bunch Jake, these are just Great Videos for us who love to spend time under the hood & learning more on maintenance with the 4Runner!!!

    • @TwistedJake
      @TwistedJake  Год назад +1

      You’re welcome!!! I was fortunate enough to grow up on the farm and wrenching on things so I learned but also realize not everyone was able to learn these things. Happy to help in some small way.

    • @serendipityguy
      @serendipityguy Год назад

      @@TwistedJake We love this channel Jake!!!

  • @MVL5802
    @MVL5802 Год назад +2

    Thanks. Good video.
    I had a tube of Amsoil Red grease NLGI 2, didn’t even pay attention if it’s Lithium based or just polymer… I hope it works fine 😅

  • @KelvinBlessedTheBeat
    @KelvinBlessedTheBeat 6 месяцев назад +1

    How do you torque the propeller shaft?

  • @parkernew8076
    @parkernew8076 Год назад

    I noticed you have Ironman suspension! I just got the stage 3 with Freedom UCAs. Amazing setup and rides like butter

  • @Lamidnightsss
    @Lamidnightsss 3 месяца назад

    Thank you for this

  • @fsantamaria1974
    @fsantamaria1974 7 месяцев назад

    Good job done..
    Thank you.

  • @tysoncravens2274
    @tysoncravens2274 Год назад

    Just did this on my 4Runner today .
    However, after doing this, my suspension seems a little stiffer and there is clunking between the rear driveshaft and transfer case when I push the car up and down. I only did 2 pumps on the slip yoke.

  • @Kaizen_101
    @Kaizen_101 Месяц назад

    Does this work for 4th gen 4runner or just 5th gen ???

  • @omegaracerx
    @omegaracerx Год назад

    Will this stop squealing noise in reverse? Thanks for the video

  • @jpjp3873
    @jpjp3873 Год назад

    How do you like those wild peaks?

  • @Wbroach24
    @Wbroach24 Год назад +1

    Isnt Zerk a bad guy in Toy story? Zert... i couldnt help it i tried i really did 😂

  • @weieng6928
    @weieng6928 Год назад

    when should we grease? any advise on interval to grease? Thanks!

    • @CrowT
      @CrowT Год назад +4

      Maybe try watching the video with the sound on🙄

  • @Treetopflyer777
    @Treetopflyer777 Год назад +1

    I bought Extreme Super Duty Performance Calcium Sulfonate Molybdenum Grease.
    It’s NLGI 2.
    Is this ok to use?

  • @merica7050
    @merica7050 Год назад

    So ngli2? And lithium?

  • @MrStreetballer5Official
    @MrStreetballer5Official Год назад +1

    Ngl I didn’t remove the head shield on the front shafts rear area and that was such a bitch but if you position yourself in the middle you can make it work 😊