Is ther anyway to know that a aftermarket regulator is fullwave ready?cuz most fullwave rr aftermarket had no pin layouts on wc of that pin is for ac,positive,negative etc
I’m currently rewiring my Her Chee ATV I bought for 100. Doing this would be to get steady current? Correct me if I’m wrong I don’t know much about GY6 engines. Also it was sold as a 50 cc ATV and he told me it might be a 90cc. He told me it does 30mph and it has 20x9.75 tires on front and 16x10x8 on rear. Is there a way to find out the cc it’s a 20” long case.
@@ThiagoKenFuzita ok Thank you! I do have a puller to remove the fly wheel. My First Staitot I bought from Amazon the ( Main Coil ) copper wires got shredded do you know what causes that to happen. I purchased another one from Amazon. Thank you for your input. It does help.
hi if i'm using a stock headlight is there anything that i need to do with the wirings in the headlight? or i just need to do what you've done with the stator and change my rectifier? I'm really interested in learning how to do this
Converting a fullwave charging modify the stator the starting winding of coil start from bodyground to end winding coil which is the charging wire for modify the stator coil the bodyground remove it to connection to bodyground the wire said stator that body ground of starting coil which is bodyground being floated now that floated wire will be the supply of fullwave stator the ending coil wire and the floated bodyground coil also a supply for fullwave regulator, here it the Philippine low cc motorcycle converted to fullwave regulator to maximize the benefits full potential charging of stator
Friend, in my case the purpose was to install the HID because in half-wave mode the HID does not work. You can increase the charging system as long as it does not exceed the voltage limit set by the manufacturer. If you convert to full wave the light will become unstable regardless of the engine rotation. Thanks.
Halfwave rectified has a dc out but not fullwave only halve if you test it on your tester or v.o.m it can detect ac wave. While the full wave rectified is from ac to Dc so it is full wave output. I hope you get my point. Sorry im not fluent at English I hope you dont mind just trying to help, correct me if im wrong.
+jas yano Friend, the simplest way for you to know if your bike is full-wave is when you turn the key in the on position if the headlamp light means it is full-wave.
great views ... of the backs of your hand !
Does it matter if you wind all the coils in the same direction?
Is ther anyway to know that a aftermarket regulator is fullwave ready?cuz most fullwave rr aftermarket had no pin layouts on wc of that pin is for ac,positive,negative etc
Hey , where do I buy that Full Wave Rectifier bro ?
Video sppeds through areas of video that contains NEEDED close-up details ... but ... video plays -extra slow - when unscrewing ordinary bolts ???
I’m currently rewiring my Her Chee ATV I bought for 100. Doing this would be to get steady current? Correct me if I’m wrong I don’t know much about GY6 engines. Also it was sold as a 50 cc ATV and he told me it might be a 90cc. He told me it does 30mph and it has 20x9.75 tires on front and 16x10x8 on rear. Is there a way to find out the cc it’s a 20” long case.
I saw a tool you had to remove your fly wheel ! Where do you get one of those. So efficient to use.
Timothy Gifford In my case I managed to remove it, the more efficient a pulley removal tool would be with screws and not claws.
@@ThiagoKenFuzita ok Thank you! I do have a puller to remove the fly wheel. My First Staitot I bought from Amazon the ( Main Coil ) copper wires got shredded do you know what causes that to happen. I purchased another one from Amazon. Thank you for your input. It does help.
what kind of tools did you used? sorry im not familliar with those tools
The charging voltage at the battery at idle after the mods seemed low, how much was is before the mod?
Can i change the stator , rectifier, and cdi and get full dc ac conversion in my ac fired scooter?. Or is there more to make my bike dc fired scooter?
hi regarding your rectifier, did you modify the wirings of the female socket depending on its polarity?
hi if i'm using a stock headlight is there anything that i need to do
with the wirings in the headlight? or i just need to do what you've done with the stator and change my rectifier? I'm really interested in learning how to do
this
Converting a fullwave charging modify the stator the starting winding of coil start from bodyground to end winding coil which is the charging wire for modify the stator coil the bodyground remove it to connection to bodyground the wire said stator that body ground of starting coil which is bodyground being floated now that floated wire will be the supply of fullwave stator the ending coil wire and the floated bodyground coil also a supply for fullwave regulator, here it the Philippine low cc motorcycle converted to fullwave regulator to maximize the benefits full potential charging of stator
Thank you for the tutorial
Sir.ung sa vega 115 na yamaha.pwede po ba ako mag paturo kung pano eh riper ung stature nya.gusto kupo matoto.
Who many watts this full wave stator watts ?
@10:20 would i need to change the pins in the harness before plugging in new rectifier ?? or does the new rectifier come ready to plug and play ??.
the 473 Hustler
in my case I had to invert the output wires of the new rectifier, it is not plug and play.
Thank u
Thank you for the video . very informative ..
how to convert in 2stroke dt125?can i do it the same?
where'd you buy your full wave rectifier?
Your so good man. Can i do this on my yamaha sniper mx 135?
I'm sorry but I do not know this model.
Beg your pardon , thanks for listening ? Motor sounds mean.
can i do this to my yamaha mio115?
Nice
change to full wave,what the purpose?can increase the charging system or just giving the light more bright?
Friend, in my case the purpose was to install the HID because in half-wave mode the HID does not work.
You can increase the charging system as long as it does not exceed the voltage limit set by the manufacturer.
If you convert to full wave the light will become unstable regardless of the engine rotation.
Thanks.
Halfwave rectified has a dc out but not fullwave only halve if you test it on your tester or v.o.m it can detect ac wave. While the full wave rectified is from ac to Dc so it is full wave output. I hope you get my point. Sorry im not fluent at English I hope you dont mind just trying to help, correct me if im wrong.
ano ba ang full wave para sa mtr ntin mga paps?
kalau buat honda blade sama gak?
this is so great :D can i do this to my wave100?
Please visit the page that is in the video description.
mastercircuits.blogspot.jp/2012/07/half-wave-to-full-wave-conversion.html
how can i know if the rectifier is full wave? in wave100 R/R is not full wave,? in wave125 rectifier it is full wave?
+jas yano Friend, the simplest way for you to know if your bike is full-wave is when you turn the key in the on position if the headlamp light means it is full-wave.
only just on not start the engine?
+jas yano yes.
Gusto ko matoto kung paanu eh rewinding.
Bagi mana cara menyoldir sepul gl pro mas beri contoh
Lite chalu ho gayi matlab charging ho rahi hai😊 I'm rite
why tempat kosong kuningan nya om??
out of focus
kalau buat honda blade sama gak?
Can i do this on a Cpi gtr50 ?
Friend, I believe that the project is the same, change the colors of the wires and the disposition of the componentes.