He could have just placed the penetrative oil towrds the camera. If anyone is curious, he is using "Kroil" penetrative oil. It's roughly $35-$55 for a spray can
@@RBTheMechanic very good stuff, I did my struts a couple of weeks ago and presoaked one side, and when I went to remove all the hardware, it was a huge difference. Smells good too
RB is there a way to replace the front bearing without removing the knuckle? I saw some videos where this can be done on older accords using slide hammer and press in kit but i am stuck trying to push the axle out of the way. Thanks!
@@RBTheMechanicI have a slide hammer and press in kit to do it but I’m not sure if it’s possible to remove and install the circular shield on the back of the spindle, the one that sits on top of the bearing on backside. Can that be removed/installed with the spindle still in? I’m just trying to avoid having to do the extra work with taking out the spindle. Thanks.
@@RBTheMechanic 🤣🤣🤣🤣 English only ?!?!?! stop it! you definitely have an accent, and your English isn't all that good, English is for sure not your mother tongue.
Bro question for you. I’m sure that I need a new shocks rear and front but what do you recommend me new shocks assembly or get just the coil springs and boots and replace them to keep the original shocks absorbes ! I’m from Boston but go all the way to where you at I have to rent a hotel. Why don’t you move here haha 🤣 ! To make my life easier 😅
I like that you explain as you go. You take the extra moment to do so.
Yup thank you
He could have just placed the penetrative oil towrds the camera. If anyone is curious, he is using "Kroil" penetrative oil. It's roughly $35-$55 for a spray can
Yes it’s expencive but good stuff
@@RBTheMechanic very good stuff, I did my struts a couple of weeks ago and presoaked one side, and when I went to remove all the hardware, it was a huge difference. Smells good too
@@FA-cd2de yup lol yes I like the smell also
RB is there a way to replace the front bearing without removing the knuckle? I saw some videos where this can be done on older accords using slide hammer and press in kit but i am stuck trying to push the axle out of the way. Thanks!
Nope u less u buy some tools but u still have to remove lower ball joint out of knuckle to get the axle out
@@RBTheMechanicI have a slide hammer and press in kit to do it but I’m not sure if it’s possible to remove and install the circular shield on the back of the spindle, the one that sits on top of the bearing on backside. Can that be removed/installed with the spindle still in? I’m just trying to avoid having to do the extra work with taking out the spindle. Thanks.
Que ruido hace al fallar el balero? Sañudos, excelente trabajo.
Sorry English only
@@RBTheMechanic 🤣🤣🤣🤣 English only ?!?!?!
stop it!
you definitely have an accent, and your English isn't all that good, English is for sure not your mother tongue.
Showing the tools prior is legit.
Thanks for sharing boss, like the long video, BTW, what's the mileage on it?
This car got like 180k
My hub stud is binding to the body. What I dis wrong here?
Not sure could be wrong parts
Bro question for you. I’m sure that I need a new shocks rear and front but what do you recommend me new shocks assembly or get just the coil springs and boots and replace them to keep the original shocks absorbes ! I’m from Boston but go all the way to where you at I have to rent a hotel. Why don’t you move here haha 🤣 ! To make my life easier 😅
I would get new struts from dealer after market be garbage now days lol yeah bro I’m jersey guy!!!
Me rb How much do u charge for bearing Just labor for 1 side. If both side. Total 4 hr? Labor?
This was 290 labor
@@RBTheMechanic 290 each side?
@@fisherbrown903 yup
@@RBTheMechanic does bearing have to be oem. Or after market is goood?
I tried for an hour to separate he ball joint on my Acura TLX.. it never did. I gave up. Gotta take the car to a mechanic now.🤬🤬
Oh Damnn well it prolly siezed
Wow great!
can anyone help me find where the Vtec solenoid is on 2018 accord sport
I’m making video on that very soon
When he finished the work, the owner of the car has not brakes cuz of many times it fall and for sure it gets damage lol
What??
I stopped using customer supplied parts. Usually all they buy are cheap eBay junk or incorrect parts. Waste of time
Watch the full video and see parts and boxes original HONDA
@@RBTheMechanic I know. I'm just saying
@@MacAutoDiag oh ok