Pt.4 Honda TRX300 Final Drive Rebuild At D-Ray's Shop
HTML-код
- Опубликовано: 6 сен 2024
- Finishing up our final drive project. Thanks for watchin'!
Pinion nut tool McDonald ATV TL1102
Rear final drive bearing/seal kit McDonald ATV BK300
Rear axle and brake panel assembly videos
Pt.2 • Pt.2 Honda TRX300FW Re...
Pt.3 • Pt.3 Honda TRX300FW Re...
Pt.4 • Pt.4 Honda TRX300FW Re...
Hands down the best video series on this, great editing, camera angles and in depth description, Honda should be paying you.
I reckon I am a decent mechanic, that said, for the first time doing a repair I want to read the repair manual, or nowadays search the internet for a write up or video. A friend wants to do his diff on a 300 so here I am. Pleasure to see a mechanic go the extra mile, instead of save a few minutes here and there. You are a very tidy fella. Your local customers are lucky to have you. Thanks for the detailed how to. Class!
I’m just about to start fixing my old Honda 300. Thanks, you just saved me all sorts of grief.
D - Ray……….THE MAN!!!! nothing else needs to be said……
I like those pumps for adding oil to transfer cases too. Good series!
You don't know how much I love your video's!! I am always working on my 4-wheeler's & other play toys myself & I ALWAYS look you up & watch how you do it. You are "the man" in my book, when it comes to turning some wrenches..
Thanks for all your help, this "Countrygirl" sure does appreciate it!
Yet another great training session. I do read the service manual but your step by step visual classroom makes it easy and enjoyable. Thanks again.
Great video series, thank you for taking the time to make them! Honda calls it a "final drive" because it's a straight axle. I do love my old 1995 Fourtrax!
Kind of late but so far I am impressed. I have a rancher 350 ES and was just searching oil filter change. You are the only one that made it clear that the one i took out was in backwards (thank you Honda dealership Carbondale ,IL) Since then all of your uploads are quality and informative.
great advice, and I learned a lot from watching these 4 video's, your my favorite because you don't cuss and say bad words in your video's. keep up the good work, and thank you and god bless you. now I got to fix my son's differential.
You my friend have done the best videos on how to so far you don't miss a lick and give tricks I will be recommending your videos 100% thank you and keep it up.
Another great how-to video from the "Ole Master, himself. Keep 'em coming D-Ray!
These are some of the best instructional videos on RUclips. Very professionally done. Thanks!
Man you have no idea how much I appreciate this series!
Thanks for putting these videos together. You do a really good job with filming and explaining.
I live down in Southern Arkansas about 2 hours away and I just got a VERY VERY used 2000 Honda Rancher TRX350TE and I’m just thinking about bringing it up there to you!! Awesome videos!!
Really enjoyed all your videos on the Fourtrax 300, thank you.
Nice series buddy look forward to your next adventure. Thanks
Well done my friend.
Great presentation! Very helpful.
Awesome set of videos!!
Super nice work.
I can’t say enough how excellent these videos are
Thanks so much for this series. Appreciate all your hard work and knowledge.
Awesome best videos ever seen this is what I look for
great video D-ray. Your videos are always easy to follow and very informative. I have a old 1985 Honda Big Red 250 ES and always watch your videos.They dont make em anymore like the old Big Red or Four Trexs, those old bikes were dang near indestructible tanks....lol.
you got that right. we bought our big red new in '86. that bike did everything. dad built a plow for it for the driveway even. it pulled moose out of the bush, everything we ever asked it to do. dad modified our hunting trailer so the rear opened right up and we could load the bike in. he reconfigured all the seating so it could fit then be placed back when the bike was out. this was years ago, way before they actually made camper-trailers with the loading-ramp rears on them. we used to leave the trailer in our spot we would choose for the hunting season. it would be between where we each lived, so that we each would have about an hour or two drive to camp. and we'd be out every weekend. never, ever had any problems. but then one year, the trailer disappeared, and with it, that cherished old big red.
you make it look so easy :)
Thank you soo much to saved my TRX
Absolutely awesome video series. I was able to follow along with complete understanding and success.
Thanks for the great information
Great dude. I would love to have a beer with D-Ray.
I love the 300 Honda videos! EXCELLENT video! I have learned so much from all your videos, please keep up the good work.
Another solid video! Very detailed with helpful references. Simply some of the best I’ve watched. Thanks D Ray!
Thanks so much. Enjoying your Videos which are direct, to the point. You are much appreciated! I’m tackling this exact job, you’ve made it obtainable. Thanks again
Great job! Glad to see it finished.
Awesome videos, thanks!!!
Awesome. Helps a lot. I'm redoing the swing arm, final drive and brake panel.
Wow the video on rebuilding the rear differential really helped thanks!
Loved this series. Thanks for being awesome Sir
This dude is awesome,wish he was close to me,he would be my personal mechanic
Very good, You make it look so Easy, Thanks for posting,
thanks for doing these videos because I got a 1991 trx 300 and I am sure I will need to do this in the future
Thanks your a Big help with all these Tips on the rear Diff.
My axle shaft won’t go in smoothly like yours did. I even cleaned the splines individually
Smashing job, Just like new and ready for fun :-D
Buen video señor vi todos Los pasos gracias
Awesome Camera work and very helpful videos 🤘🏻🤘🏻
D-Ray rules!!! More videos please !!
Great vid ,
Thanks D-Ray one hell of a good video.
Another fine job by d-rays shop
Very well did video. I appreciate the time to do it
I was wanting to see how you got that inter pinion bearing out it's a booger
Could you do a video on replacing the shaft on the back of the motor where the yoke slides on. My splines are bad on my Honda 300
I really like your videos. I was looking for the one about clutch adjustment on a Honda TRX 300 4x4. I thought you had done one but I can't find it now. Was I mistaken ?
Awesome, great work as always. Your videos are very helpful, thanks a lot for doing them.
Hello D-Ray. Hey I have subscribed to your videos and liked all the ones I've seen. I've learned a great deal from you and I thank you. I was wondering if you could just take a second and answer a question I have regarding the main jet bonnet. During a recent carb rebuild, I discovered my carb did not have a bonnet and I would like to know how necessary they are to the carburation process. What is affected if you don't have one? I've cleaned this carb back to shiny and clean and clear and she still seems to be finicky with idling and starting. Revs are great, power is there, but even after a ride or two around the block, if she quits, she fights me to start back up. I have the mixture screw set back to the factory setting of 1.75 turns from light seat. I've taken the carb off again just to confirm nothing is blocked and it wasn't. Could the lack of the bonnet be affecting this? Thank you in advance.
I wish you would do a gear reduction swap video. I'm wanting to do a reduction on my 250 big red but have no idea how to remove the gears
looking in Brazil
Very professional! Thanks for the lesson.
Fantastic job brotha!!! THANK YOU!!!
you said the axle is symetrical, would it be a good idea to flip the axle for even wearing of the splines? (assuming new bearing on both sides and seals)
Sure would like to see a video of a rearend tear down on a 2016 Honda pioneer 500 cause mine sounds like a rolling junk yard and it only has 150 miles on it.
Love your videos! when will you do a restoration on a honda atv? that would be cool!
I learned a whole lot for your videos thank you I work on four wheelers my self mostly Yamaha so thank you
You are The best! Can I bring my 2000 Honda 300fw for a complete tune up/ service to you? I want to learn about it and you know how to explain everything.
great idea for refill. thanks
Great series, helped me a lot.
Hi my rear diff is so badly corroded the bolts on the underside are exposed what should I do? please help
Great video Thanks D RAY
Help PLEASE!!!
I ordered the kit. Got it apart and ended up needing a new gear set.
While awaiting gears the work bench was cleaned by someone else and the spacer shims for ring gear were thrown in trash apparently. There are 20 different options for thickness. Where do you think I should start? In your experience is there a regular OE combination I should order first to start with?
Very good teaching video well done.
how important is the hose vent ive had all bearings changed it wil work for a while but then after an hour of use clicking noise like if the ring gear is jumping and thanks for your videos
Thanks for the video d Ray but how can I see the other half of the video to putting the bearing on brake side on the axle
Great videos. Thank you.
Good job 👍
Nice Job !!!
great video as always
Hey Ik it’s been a min sents you posted this but my dif on mine doesn’t seem to seat all the way in and idk what it would be caused by
Thanks to your videos I've fixed a lot of my bikes. Your the man. I have a quick question for you. On my 88 300 2wd should the drive shaft pull out like it did on this one? Mine isn't, before I damaged anything trying to tap it out I wanted to hear yours or someone's input that's had this issue before.
Very helpful
How about a video on a Honda Four man 400 rear end rebuild
you should are a video on rebuilding a 250sx rear-end I need to do mine and watch8ng this video scared me lol
SHANNON DOUCETTE it's the same process
what an awesome guy
show how to put the axle in
What type of gear oil did you use in that D-Ray and why?? thanks
is it possible to change the axle seals without disassembling the whole rear end
When are you going to do a review on you silverado cam? did it turn out good?
PURE AWESOME! : )
I've seen people put a grease fitting on their fill plug. Would you recommend doing this, or is it better to just use bearing oil like you showed in the video?
how did u remove the axle bearing, mine are shreded and cant get out. also great job on the video.
Any way to get that special tool that gets pinion shaft out. I just work on 1 time hate to pay 100 for 1 time
Hi D Ray, have a ? are hubs on 300 fourtrax tight when you slide them on or is there a little play in them until you tighten hub nut.both of mime come loose and I did tighten but maybe not enough.
are you gunna do a video on the front dif housing ?
Cool
Is my diff fluid supposed to look like chocolate pudding
How much is the socket? Where can I get one?
I have a 1996 Honda fourtrax 300 2w drive how much do you charge per hour
What do you charge to do that job?
How do u charge to do this
I’m in Arkansas near you I’m trying to get my final drive rebuilt contact me