DIY BOOST GAUGE ARDUINO | SIMHUB
HTML-код
- Опубликовано: 10 сен 2024
- Make a turbo boost gauge to your racing simulator dash. Arduino controlled using SimHub.
Only AC provides Turbo data, If turbo is not available in the game or the car, Simhub will then fallback to Engine Torque (PCars only), then to throttle pedals (any game with throttle pedal data)
PARTS
Boost Gauge
12V Power ebay.us/OpXvXv
Arduino bit.ly/3zsbjrB
Wire eBay 22awg BG bit.ly/3zK5ar1
Solder BG goo.gl/Ni6n4P
Soldering Iron bit.ly/3zOYtVC
Third Hand BG bit.ly/2kABI3Q
My Soldering Iron ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
My SIM Setup
Fanatec CSW 2.5 Wheel base
Fanatec Universal Hub w OMP wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Table clamps
Click here for Fanatec gear:
www.fanatec.co...
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this please share the video with them.
Check here for other SIM Mods and DIY projects.
/ @amstudioprojects
| SIM HUB | CREDIT TO AUTHOR
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
For years I have been trying to understand how this works. And for once someone finally explained it. Thank you
Wow, that is so nice, i really would like to see it working on the F40 or the R34, in special the F40 because of the turbo lag!
Dont Mistake The low FD with turbo lag
This is another level work! I am happy i came across this channel!
Cheers man, and be well!
Love your vids really helpful! Keep up the amazing work 👍🏻👍🏻❤️
Works on ETS2! Your tutorials are amazing!
Dude! I fricken love your videos man! Seriously the best flippin channel I have ever subscribed to. You constantly improve my set up and I love building it. I just want to thank you for all the time you spend showing us this awesome stuff you do and just... thank you man. You're a genius.
Don't think I've clicked on a video so fast.
Been waiting for a boost gauge tutorial from you. Good job.
So with this method does sim hub manage peak boost numbers? So let's say there is a car in sim that makes only 1.0 Bar boost, would the gauge read 1.0 Bar max? Really great videos thanks for making them!
What can I say , you Da Man!
You never disappoint with any of your A class vids
The most thorough Sim Mods stuff on you tube
Such a fantastic mod idea. Thanks for the awesome video tip. -Salute.
Awesome work like always. Two thumbs up.
Omg thankyou for demonstrating good soldering technique...
This Audi is a great car on iRacing, unfortunately no valid series for that... Nice video, dude! Alex
Thanks!
Amazing work once again
Thank you!!! Amazin work men!
I have one question can I use defi turbo gauge but copy not original. It will work or no?
Question does this work on logitech g920, xbox one,fh4 and can i find cheaper boost thing that shows it
What if I want to drive the Lotus 98T at full boost? xD
i wanted to ask exactly the same question!
Hey i want to make the tachometer and the only thing left is the transistor can you give me a link to a transistor from ali express pls because its the only web site that ship to my country i need the transistor so badly
can you use multiple gauges with one arduino?
again very nice. Like always
can you have multiple gauges on one Arduino? or doesn't simhub support it?
hi, it never show connect to pc? which wire or any usb cable connect to pc so that the games is sync? OK, i only reliased the Nano usb, thank u
Thks very much for this vidéo !
Great tutorial, thanks! Find it unfortunately hard to find the exact gauge that has those 4 and 3 pin plugs. Some just have 4 or some have 4-2-4 - so I would be more than glad to know which one available today would fit!! thanks!
You ever figure it out?
@uhavinalaughm8 You just need any electronic boost gauge, mechanical gauges won't work.
Hi man, how are you? Do you have any schematics on how to actually mount this pressure gauge on the Arduino? Because as you showed in the video, I found it a little confusing. I'm grateful
Dors it work in xbox one s with g920 steering
Is there any way to turn off the audible sound on this boost guage? Kinda annoying when reach the max boost.. always beeping 😅
hi, I plugged in like in your video, and I constantly get a beep that I can't turn off
Great vidéo 👍 make for all gauge please 😎
And the welding and conection graph as you did in previous videos
Can you show how to connect a game like eurotruck? Un my pc doesn't work, it says always disconnected
Question, can I use a single Arduino nano to run multiple gauges. I.e tach,speedo,boost
When i make rpm gauge and boost gauge i can use it in the same time?
Thanks for this am studio
Could u possibly do anything for
Flying sims that would
Be great, keep up the great vids
but my honda civc will make that gauge go round 3 times so what then?
Where's the link from the gauge?
Could you set this up on a MUX board and connect to an Arduino ATMega 2650?
I need the wiring diagram pls
I've noticed that you use the arduino nano for all your projects. I have a couple of pro micros and Uno rev. 3 laying around, would there be any reason the sketch would not work with those boards instead?
Does this work for every pc game, clearly works for asset to but what about beam NG drive?
Is possible make this with Digital boost cauge? And is possible make with Sim fuel And air mix cauge?
Can you please show us how to make wheel mounted F1 style clutches?
What I'd like to know can you use a single Arduino nano for the speedo, RPM, and boost ? Or would it be too much for it.
I'm wondering the same thing so I know what all to buy
Lets say i used a full gauge cluster from a BMW e46. Would i have to use a new arduino each time? or could i just use say an uno board?
After looking to gather parts for these builds, I noticed you used a slightly different Arduino Nano for your Button Box video. Are they both able to fulfill the purpose of creating either the Button Box or Boost Gauge? The parts list in the Button Box video shows a link to a Nano Pro. I don't know any better, but is there a big difference?
Hi, how are you? I'm glad you enjoyed your video. You would have a project using Arduino and an analogue speedometer. Thank you.
will be making a e36 cluster from a later video, might do this to add later. does Live For Speed not have boost info? Love the content, your videos will give me alot to work on during winter :D
You have to change the game in the software every time you play something different or you can load a number of games into it?
The link in the description doesnt work anymore, does anyone know where i can find one like the one showed in the video??
Am I able to use the same arduino nano for two guages and use pin 5 for the boost gauge and pin 9 for rpm gauge?
Hi,do you think is it possible to connect the obd device with pc and apply in some racing games like ac or project cars2 ？
this can be done with a speed marker? would you be so kind as to make a video explaining it? I'm very interested and I can't find anything on RUclips
i have some questions...
1st - Can I use only one 12V Powersupply for the RPM Tachometer and the Turbo Gouge, or I need 1 powersupply for each? If its possible to use only one, which powersupply do you recommend?
2nd - Can you make a video for a speedometer?
Love IT, but on my gauges max 1.5 (set to 2, adjusted to simhub but in test and ingame only 1.5 Help..... please
Hi guys,
could you tell me where you bought the Boost Gauge 2.5" 60mm Defi.
I don't find it in aliexpress.
Just asking but what wheel and pedal setup were you running also is there a way to get more travel on the g920 throttle and clutch pedals to be more realistic? Anyways great video and fun project as usual keep it mate!
Using Fanatec Clubsport, list in the description.
amstudio my bad I should have looked at the description thanks though
I the video you use a Bar gauge , but what happens if I use a psi gauge? Thanks in advance!
Can we use at the same time both, the boost gauge and the rev counter gauge? Thanks.
Would this work on console
If you find a way to download slmhub on it it will work
Is it possible to connect the rpm gauge and boost gauge to one audrino?
is it compatible with other counter?
Can i build this and the rpm meture vith a pro micro because the nanao not sells in my country?
Where did you get the boost gauge from
Can I power both this boost gauge and the tachometer in another one of your videos off of one ardunio nano?
Can you do how to make a shift light please. And by the way lobe the videos. Keep up the good work🖒
That's hotter than hot!!
Hi, I know this is an old video but I had a question, I made an E36 guage cluster following your guide and I was wondering, if I made this boost gauge could I hook it up to my existing 12v power port that feeds my guage cluster so both the cluster and the boost gauge run off the same 12v 60W power supply?
I'm not specialist but i think it would work, i have same question because i want to do e36 cockpit in my room
@@niga_racer ok well I picked up a cheap secondhand boost gauge, when I have the time I'm gonna do all the wiring in which case I'll update wether it works or not, if it doesn't no biggie really, as the small 500ma power supplies are dirt cheap online
Hi! Loved your video! Someone may have asked already or I may have missed it but do you have a link on where we can buy the same or similar boost gauge? Thanks so much!
Can you do this for xbox one?
It's a good question, we have to investigate if simhub works on a xbox one....
No it doesnt work for xbox
Hello, purchased a boost gauge very similar to yours in the video but I only have one 4 pin plug which will go to the power supply and have a piggyback wire for the arduino board, the problem I have is the 3 wire cable I supplied only has a red and a black wire connected, there's no yellow on that to supply the signal wire for the board. Can you help me please? Thanks. Tony
Did you ever figure this out?
Can u do more Fanatec videos. I'm thinking of getting it for my PC and I just need a second opinion.
So what do u think?
I really love this. But what is boost? It can’t be like nitros.
Will this work with a speedometer or a fuel gauge?
Could you make a video of how to put a board with needles and its lights on a PC with usb?
Hello!!!! Can you give us olink where you bought the gauge ??? Congratulations on the projects and thank you very much for helping us do it !!!!
can i use like a 4 in 1 usb to plug all my mods??
Also possible to make with USB connection?
does the arduino has an integrated memory ?
What sucks is that I only have an Xbox and no pc for that sim hub :(
Hi.
if I wanna have a RPM gauge, a boost gauge, a Gear gauge and a speed gauge, can I use the same arduinio of i need one by device ? thx
You can use one arduino for all
Can you use any gage and then use same wires as you? Great vid
Hey. if I want to install 3 gauges. Can i use same transistor board? Or separate the board. Thankss
Like. Turbo gauge, temperature gauge and rpm
working on dirt rally? btw awesome videos !
Is it 12v 5 amp plug??
Hi! Love all your vids! Can I ask for a link for that boost gauge? Thanks!
Can you plug it into any pwm pin? Mine keeps failing when I try to upload it
You can use any pwm pin, but pin 5 has better resolution
Hi. Does anyone know if this would work on ETS2?
Amstudio pls help ım how to with servo
#amstudio
FUNCIONA UM TRANSFORMADOR DE 12V -- 2.5A ???
PFV AJUDAAA!!!
Can you do a speedometer pls, what type off speedo and how ? We would really appreciate. (I saw your rpm too, well done).
SimHub doesn't support speedos rn
James Taylor oh no:( thank you for telling me !!
Ik it's sad, wotever should have added support for speedos instead of boost gauges. There is other software that can do that but amstudio would prob stick to SimHub
James Taylor I was currently looking for an other software with speedo. But I can't find one for the moment (imo boost is nice to see, but way less essential than a speedo).
I'm still searching for an affordable candidate for speedo ;) Boost despite being "for fun" are cheap, speedo are almost impossible to find at a decent price.
One question: can I use one arduino for multiple accessories? For example this boost gage and a tach in the same board?
Love your videos keep them coming!
Yes, just need to assign the pins when setting up the sketch
amstudio sweet! Chears!
@@amstudioprojects I can’t find a suitable boost gauge all have boost pipe going to them
@@fredsteward9300 you need an electrical boost gauge, it will have a wired sensor that runs a boost hose to the gauge
Hello, can you use same arduino for both, rpm and boost?
I did it but it's not that good, the Arduino reboots too much
My boost gauge needle shaking really fast, any ideas?
hey me too any body can help us!!
what wire wattage do i get?
Can i buy this boost gauge
113th viewer 17th liker.. Good job bro keep up the good work
You dont tell witc connectors in arduino
Great video as usual can you provide a link to international shipping for boost gauge
Gonzalo Jimenez Aliexpress men! Look for Defi boost gauge