Thank you! I've read so many forum posts talking about using compressors, but none of them suggest a starting point for the values. I haven't heard about limiters, but it seems like a specialized compressor. I'm gonna look more into those.
Trying the limiter this week - so far during service #1 it's working well. I was boosting already through make up gain on the stream matrix pair but this adds a bit more. Along with the Stereo enhancer and other things, it makes the X32 operate like higher priced systems. Finally getting the most out of the X32 for online. However, the Behringer Wing has my eye for more capabilities... The reason is more possible effects per channel. Looking to consider doing that swap in 2022.
We just got a used x32 and started noticing that the livestream volume was very low. I applied what you said in the above video and it worked great. Thank you. Then I realized that the singers were much loader than spoken voice, so we mixed that to where we are pretty close. Then this Sunday one of the singers started to talk before he sang, and even though the volume of his mic was perfect for singing, when he talked we could just barely hear him. Any thoughts on this?
I'm anxious to try this this Sunday. We've been having digital distortion issues with our live stream along with the broadcast volume being low. Would this fix both issues? I can send you a link to last sunday's service if you need to hear what I'm talking about. Thanks so much for all the knowledge. New sub
Interesting that you are having distortion issues and the live stream volumeb being too low. Nevertheless, it could be one channel causing the distortion. If that's the case, the limiter will help take care of both issues.
@@collabworship If you get a chance you might be able to hear what I'm taking about around 21:45. It's throughout the set but you can hear a digital, warble sound. ruclips.net/video/9Dlf-nHlytY/видео.html
I know this is an old post. Just like the analogue board, if you distort early in a signal stream, turning down the gain downstream will only give you a quieter distorted signal. Monitor the signal gains every place you can, and every channel you can, and make sure you aren’t distorting anywhere.
Thanks again for the awesome videos! We didn't have a low volume issue but I added the precision limiter anyway. The volume is great but it causes the speaking mics to sound like they're in a tunnel. Any ideas?
Thanks Chad! Sounds like maybe your ambient mics are too loud during the speaking moments? That's usually what would make them sound like they are in a tunnel.
@@collabworship I thought that might be the case and muted them. It only goes away when I remove the limiter. Limiter gone and ambient mics back on and it sounds fine. Doesn't make any sense to me.
@@chadkeller8057 Very strange. If you are able to, save a scene to a flash drive and email the .scn file to kade at collaborateworship.com. Then I can dig into your setup and see what is going on.
@@collabworship Thank you! I'm trying to figure a few things out and I'm a volunteer so I don't always have access but I very well may take you up on this. Our livestream sounded good before the pandemic and all of sudden we have problems. Not sure why.
i’ve tried this but my church has the opposite issue, its too loud at all times, the livestream audio doesn’t sound good sometimes the slow songs sound alright but when we get to praise its too loud idk how to fix it
This guy is a wealth of knowledge but this isn't a great solution to the problem. If you have room to boost the stream mixbus by 12 db, you did not gain stage properly and this will overdrive a weak signal. On the flipside, if you did gain stage properly and you try this, you will ruin all your hard work because an insert boost is post preamp. Once your mixbus is averaging around -12 Db, if the stream still isnt loud enough, you're probably degrading the signal with output cable conversions. Try sending the mixbus via USB/ethernet/dante if your soundboard supports it. But improper gain staging is most likely the issue.
Great for someone using an X32 but not for anyone else using analog equipment. Probably should retitle the video. I have the loudness issue myself in my livestream but am using an GL2400 analog board so this didn’t help me.
Is it possible to use the limiter function on individual channels? We don’t need the volume boosted on the overall livestream mix, just specific instruments like the bass. Hard to get enough signal adjusting the gain without something peaking or distorting. Thoughts?
Hey Gary - You can use the limiter on individual channels as an insert, but a better solution would be to compress the channels in question. Here's a video on that: ruclips.net/video/Jp4wY8G9Kcg/видео.html
If you are listening on a phone, this will always be the case. Phones speakers cannot produce much bass. If you are listening through quality speakers and there is still no bass, you'll want to check your EQ settings and make sure the bass isn't being cut out of our live stream mix.
Hi there. Thanks for sharing. I have a question. I use a presonus studio live 16.4.2 mixer and when I live stream the end product volume is very low. I connect my irig stream to the output and that’s how I get my live stream sound. How can I solve this challenge? Thanks.
Your mixer should have a limiter, similar to the one mentioned in this video. If not, you can also use a compressor with a high ratio to accomplish the same thing.
What would be my issue if my gain reduction meter isn't reading anything even with the input gain cranked? My stream sounds much more consistent but it's still not loud enough. In fact, it's quieter than it was without the limiter. I'm stumped 🤷♂
Great information. I using a 2nd mixer for my live stream. I have a Soundcraft Ui24 for my live stream mixer. On my master output that's where my limiter is located. I down loaded your cheat sheet and I do understand that this cheat sheet is setup for a X32 mixer and you did say that this would work on any mixer. The only setting I have on my limiter is a threshold, ratio, attack, release and gain and hard knee button. My knee button will only go to hard knee or soft knee setting and it do not have a volume gain and I do not have a stereo link nor auto gain on my limiter settings. As for squeeze setup goes is that same as the threshold. Can you help me out with the setting.
Hey Davell - In your case, just disregard all the settings that aren't available. Then, set your threshold so that it doesn't limit more than about 3dB.
@@collabworship Kade thanks that is helpful advice, which I can happily follow. My only concern is that many of our sound engineers have a pretty basic understanding of the system, so they may allow compression to go well beyond 3dB. You have more automation at your disposal, which makes it safer. Having said that, digital clipping is so unpleasant, that we have to stop it somehow!
@1:21, my my middle two knobs only show "mute" not "insert". I followed the steps but it sounds like it affects mains even though the livestream bus is selected.
I haven't had a chance to try this yet, but do you need to switch between pre and post each time this is set? Am I understanding that correctly? Thanks!
Audio QUALITY issue: streaming to RUclips Blackmagic Pocket Cinema Camera 4K is fed from our old Soundstream analogue console. Sound Quality Good when recorded on camera. Sound Quality good out of the HDMI from camera. (Plugged HDMI from camera into TV) HDMI to USB 4K adapter is used to connect to a PC. The issue so far seems to be live streaming directly using a BROWSER. Our RUclips channel uses low quality sound CODEC compression when we live stream this way. (it sounds awful). When we used the software OSD the quality was great. Now the big question, Is there any way of forcing the stream [using a browser] to load HD video and to NOT compress the AUDIO?
I am not aware of a way to set audio quality in a browser. You may search for a Chrome plugin and see if something exists. Another solution is to stream through OBS (free software) so you have more control over the stream quality.
Does pressing the insert button ( at time 1:22) link the live stream buses channel together for stereo or do you have to do that before you start the setting up for the limiter?
@@collabworship Thanks for your response....I watched several videos on effects setup and I found one that had a complete explanation of how insert and side chain effects are setup and function on the X32. I now understand why my question was vague. Your videos are great and I plan to watch many of them. Thanks for doing these videos. I will now be able to do a better job setting up and mixing at our new church.
Quick question. I’m wanting to add some panning to our livestream without it panning the room. I linked the livestream buses and I see the panning objection and I pan them on there but it didn’t pan on the livestream. Wondering if you can help me.
Make sure you are using two spereate outputs to your live stream computer (one for left, and one for right), and that your live streaming software is set up to receive a stereo connection.
What if we’re using a irig and we plug it into the iPad? Would that make a difference. Cause we don’t use computers for our live stream. And also we’ve created to separate sends on the board but it’s when you listen back to the live stream there not pan on there. And on the routing would we send the livestream bus to the aux in sends on the back of the board that’s where we usely plug in our irig.
@@dariousmarshall2838 I believe the iRig only has one input. A stereo mix requires two inputs. So, to have a stereo live stream mix, you'll need to get an iPad audio interface with two inputs.
#collaborateworship thanks a lot for the help. Being using the Lim ever since I watched this video but recently I've been having issues with my pastor's mic in the mix ... It distort very bad . Have tried ways I could but to no avail. Could you assist please
Hey Kade. We ran this today. We had to go +16.5 on the limiter’s input gain to get 3 to 4 db of reduction on the limiter meter. Then I checked the online bus solo’d and we had to drop the bus fader down quite a bit from normal (about -10), otherwise it was clipping the bus. Does that all sound normal?
@@collabworship it was set to post. The online bus pair was fine until I pushed the Solo button to check the online mix, then the Solo meter to the right of the X32 screen was redlining. I dropped the bus level and got the meter to settle down. Thoughts? Thanks.
@@chadt5584 Check your settings on the "monitor" screen (tap VIEW in the monitor section on the top right of the X32). You might have it set to add trim when soloing.
@@collabworship thanks Kade, I will check that. Speaking of the Monitor section, do you set Signal Source to LR PFL? And do you check any of the special boxes? I also haven’t figured out the difference between the “LR Bus” and “LR PFL” tap location options in the Signal Source selection. Thanks so much.
@@collabworship really appreciate your support.. but I play less than unity level... My master gain for the broadcast mix is set always at -20db . Anything higher than that will distort really bad . I don't know if it is as a result of the soundcard that receives from my board before sending onto the desktop for the live stream...... A quick question though. Do you send the signal directly from your FOH to the Desktop/laptop you use for your broadcast?
Hey @@collabworship Just curious, why would one use a dedicated audio interface like the Scarlet 2i2 when one can directly send the output through Card Out?
@@enshuti You can definitely use the built-in USB audio interface (CARD) on the X32. The benefit to using an external is if you are unable to route your live stream mix to channels 1&2 on the CARD out tab (e.g. if you are also recording all 32 tracks for virtual sound check or DAW mix later on).
What options do you suggest for limiter setup if you’re using a A&H Avantis, with the dPack? I was looking at the library of limiters available, but I’m wondering if an OBS-based limiter is a better option?
Hey Justin - Not sure on this. I've not used the Avantis mixer. I'd experiment with what you have and then compare it to OBS to see what gets you the better result.
We have an A&H GLD-80, which has even fewer options. Still, I am going to try a stock Manual Peak compressor with a ratio >10:1 and the attack and release settings recommended here. I’m not sure whether our lack of a Squeeze function is a serious omission.
Mine is on custom because I have some channels set to "pre-fader" but most on "post-fader". If you wanted them all to be post-fader, you can change it from custom to post-fader.
I have set this up and once I insert the limiter into my live stream bus it also effects the foh speakers and stage monitors. I’m sure it’s a routing issue but can’t seem to figure it out. Any ideas?
Hey Daniel - Save a scene to a flash drive and then email it to me (kade at collaborateworship.com). This will enable me to see your setup and diagnose what went wrong. Thanks!
Jesus Christ is the son of God who died and rose three days later and loves all of you. He died for everyone and wants you with Him, to know Him and live for His glory. Come be saved eternally and spend time with Him to know Him. Be saved, free, forgiven, healed, delivered, baptized, whole and let Him show you how He is everything you need. 🕊️💕Live righteous and Holy because He said to and paid for our way to live like Him. Ask anything in His name and the Father will do it amen hallelujah praise God thank you Jesus . 🙏 I lift up everyone's prayers, wants and needs to You Jesus, please pour out blessings. May Your favor, grace and mercy be upon the world. In Jesus name come help us all. You know our needs and everything else about each of us. In Jesus name amen thank you Jesus praise God 🙏 Jesus, Help people to be rooted and grounded in Your love and to obey Your truth. That they are living in the truth being taught by You. That they know Your voice and word. Knowing truth from errors, discernment. 💕 We are ambassadors of Christ. We represent God, when we are seen Jesus should be seen, His ways not ours. We should be living for and showing God, living for His glory. We are to be an example of Jesus for the world to see Him and want to know Him and know Him more. 🙏 🔥 2 Chronicles 7:14 says, if My people humble themselves and pray and seek My face and turn from their wicked ways I will hear them from heaven and heal their land. 🙏 💖 People need to turn from their wicked ways, Jesus paid for it. That's God stating it in that verse and there are more verses. People need to repent, to be cleansed by His blood and live Holy because He's Holy and righteous because He's righteous. Our God said to stop sinning in many many scriptures and He paid for everyone to be cleansed of sin (Isaiah 53), and to live how He said. He dwells in the Holy temple (your body) and said not to defile the temple. He said to defile the temple is death. He's always serious about everything He said to do. He's just as serious about what He said not to do. We live in obedience to His law, every word if it! He dwells within us all to be with and lead us in His ways. 💕🙏🔥 🕊️ Deuteronomy 28 there are blessings for obedience and curses for disobedience. The whole chapter, and verse 46 is one example of generational curses. These go into the following generations, the 3 and 4th. Our children pay the price for our sin. Stop sinning you are sending consequences to yourself and to your loved ones, children. By God's law you are. If you don't believe me ask Him, in Jesus name may you see and know the truth in it's fullness. Love your neighbor as you love yourself. Jesus is worthy of everything He said and paid for, so I implore you to do as God said. Jesus said If you love me you will obey my commands. Love Him with all your heart, mind, soul and strength. 💖🔥🕊️🙏 Praise God Hallelujah Jesus🙏💖 In Jesus powerful name🙏🔥🕊️ 💖
Cheat sheet is a signup scam....what the crap? All links require personal information to get the supplied help. Damn shame you aren't just helpful and are using the church and other people's issues to turn a profit by collecting and selling email addresses.
No dude seriously you are a live saver!!! My pastor is going to be so happy once I fix his sound
Thanks man!
Thank you! I've read so many forum posts talking about using compressors, but none of them suggest a starting point for the values. I haven't heard about limiters, but it seems like a specialized compressor. I'm gonna look more into those.
🙌
Trying the limiter this week - so far during service #1 it's working well. I was boosting already through make up gain on the stream matrix pair but this adds a bit more. Along with the Stereo enhancer and other things, it makes the X32 operate like higher priced systems. Finally getting the most out of the X32 for online. However, the Behringer Wing has my eye for more capabilities... The reason is more possible effects per channel. Looking to consider doing that swap in 2022.
Awesome. I've had my eye on the Wing too... but haven't gotten my hands on it yet.
Thank you, I'll pass this on to our church!
Excellent video. Very well explained. The picture quality of your video is truly amazing!!! Thank you.
Thanks Johnny!
Can't wait for the rest of these livestream videos! Thanks for all this :)
My pleasure Johny! It's an honor to serve. -Kade
How important is the attack setting? A lot of the free VST plug-ins I've found only have a release control.
Oh boy our GR meter never lights up and our Live Steam audio needs more power. I will confirm our settings to yours suggested.
We just got a used x32 and started noticing that the livestream volume was very low. I applied what you said in the above video and it worked great. Thank you. Then I realized that the singers were much loader than spoken voice, so we mixed that to where we are pretty close. Then this Sunday one of the singers started to talk before he sang, and even though the volume of his mic was perfect for singing, when he talked we could just barely hear him. Any thoughts on this?
Adding more compression to your vocals should do the trick. Here's a video on that: ruclips.net/video/Jp4wY8G9Kcg/видео.html
I'm anxious to try this this Sunday. We've been having digital distortion issues with our live stream along with the broadcast volume being low. Would this fix both issues? I can send you a link to last sunday's service if you need to hear what I'm talking about. Thanks so much for all the knowledge. New sub
Interesting that you are having distortion issues and the live stream volumeb being too low. Nevertheless, it could be one channel causing the distortion. If that's the case, the limiter will help take care of both issues.
@@collabworship If you get a chance you might be able to hear what I'm taking about around 21:45. It's throughout the set but you can hear a digital, warble sound. ruclips.net/video/9Dlf-nHlytY/видео.html
I know this is an old post. Just like the analogue board, if you distort early in a signal stream, turning down the gain downstream will only give you a quieter distorted signal. Monitor the signal gains every place you can, and every channel you can, and make sure you aren’t distorting anywhere.
What is the difference between inserting this effect to the buses i use for live stream, and using compressor with make up gain on the busses?
Thanks again for the awesome videos! We didn't have a low volume issue but I added the precision limiter anyway. The volume is great but it causes the speaking mics to sound like they're in a tunnel. Any ideas?
Thanks Chad! Sounds like maybe your ambient mics are too loud during the speaking moments? That's usually what would make them sound like they are in a tunnel.
@@collabworship I thought that might be the case and muted them. It only goes away when I remove the limiter. Limiter gone and ambient mics back on and it sounds fine. Doesn't make any sense to me.
@@chadkeller8057 Very strange. If you are able to, save a scene to a flash drive and email the .scn file to kade at collaborateworship.com. Then I can dig into your setup and see what is going on.
@@collabworship Thank you! I'm trying to figure a few things out and I'm a volunteer so I don't always have access but I very well may take you up on this. Our livestream sounded good before the pandemic and all of sudden we have problems. Not sure why.
i’ve tried this but my church has the opposite issue, its too loud at all times, the livestream audio doesn’t sound good sometimes the slow songs sound alright but when we get to praise its too loud idk how to fix it
This guy is a wealth of knowledge but this isn't a great solution to the problem. If you have room to boost the stream mixbus by 12 db, you did not gain stage properly and this will overdrive a weak signal. On the flipside, if you did gain stage properly and you try this, you will ruin all your hard work because an insert boost is post preamp. Once your mixbus is averaging around -12 Db, if the stream still isnt loud enough, you're probably degrading the signal with output cable conversions. Try sending the mixbus via USB/ethernet/dante if your soundboard supports it. But improper gain staging is most likely the issue.
This awell is very true
Great for someone using an X32 but not for anyone else using analog equipment. Probably should retitle the video. I have the loudness issue myself in my livestream but am using an GL2400 analog board so this didn’t help me.
What software are you using for your live stream? It may have the ability to set a limiter there.
Is it possible to use the limiter function on individual channels? We don’t need the volume boosted on the overall livestream mix, just specific instruments like the bass. Hard to get enough signal adjusting the gain without something peaking or distorting. Thoughts?
Hey Gary - You can use the limiter on individual channels as an insert, but a better solution would be to compress the channels in question. Here's a video on that: ruclips.net/video/Jp4wY8G9Kcg/видео.html
@@collabworship Outstanding. Thanks man.
Please help me am working on an X32 mixer but my Livestream are always thin with no bass. How do i get this type of audio the one on these post
If you are listening on a phone, this will always be the case. Phones speakers cannot produce much bass. If you are listening through quality speakers and there is still no bass, you'll want to check your EQ settings and make sure the bass isn't being cut out of our live stream mix.
Hi there. Thanks for sharing. I have a question. I use a presonus studio live 16.4.2 mixer and when I live stream the end product volume is very low. I connect my irig stream to the output and that’s how I get my live stream sound. How can I solve this challenge?
Thanks.
Your mixer should have a limiter, similar to the one mentioned in this video. If not, you can also use a compressor with a high ratio to accomplish the same thing.
Brilliant! Thank you
Welcome!
Thank's for the videos 🙏
No problem!
I have my livestream ran through a matrix. can I still do this with the matrix or will I have to reroute my livestream audio?
Yes, you can insert an effect onto a matrix.
What would be my issue if my gain reduction meter isn't reading anything even with the input gain cranked? My stream sounds much more consistent but it's still not loud enough. In fact, it's quieter than it was without the limiter. I'm stumped 🤷♂
In engineering terms, what exactly does the Squeeze control do?
can this be applied on DAW sourced livestream mix audio? currently we are getting our obs audio feed via pro tools. thanks in advance for answering :)
You bet! You'll just apply the limiter on the overall mix in Pro Tools instead of on the X32.
Does this limiter only impact the live stream? It seems mine affected everything…
It all depends on how you have things configured. Send us an email if you'd like us to dig into your configuration: collaborateworship.com/contact/
Will these settings work if your streaming was only set up for mono??
You bet!
Great information. I using a 2nd mixer for my live stream. I have a Soundcraft Ui24 for my live stream mixer. On my master output that's where my limiter is located. I down loaded your cheat sheet and I do understand that this cheat sheet is setup for a X32 mixer and you did say that this would work on any mixer. The only setting I have on my limiter is a threshold, ratio, attack, release and gain and hard knee button. My knee button will only go to hard knee or soft knee setting and it do not have a volume gain and I do not have a stereo link nor auto gain on my limiter settings. As for squeeze setup goes is that same as the threshold. Can you help me out with the setting.
Hey Davell - In your case, just disregard all the settings that aren't available. Then, set your threshold so that it doesn't limit more than about 3dB.
Thank you
@@collabworship Kade thanks that is helpful advice, which I can happily follow. My only concern is that many of our sound engineers have a pretty basic understanding of the system, so they may allow compression to go well beyond 3dB. You have more automation at your disposal, which makes it safer. Having said that, digital clipping is so unpleasant, that we have to stop it somehow!
@1:21, my my middle two knobs only show "mute" not "insert". I followed the steps but it sounds like it affects mains even though the livestream bus is selected.
Are you on the latest firmware?
I haven't had a chance to try this yet, but do you need to switch between pre and post each time this is set? Am I understanding that correctly? Thanks!
Nope, you do not have to switch back and forth. The insert position needs to remain in "post".
Audio QUALITY issue: streaming to RUclips
Blackmagic Pocket Cinema Camera 4K is fed from our old Soundstream analogue console.
Sound Quality Good when recorded on camera.
Sound Quality good out of the HDMI from camera. (Plugged HDMI from camera into TV)
HDMI to USB 4K adapter is used to connect to a PC.
The issue so far seems to be live streaming directly using a BROWSER. Our RUclips channel uses low quality sound CODEC compression when we live stream this way. (it sounds awful).
When we used the software OSD the quality was great.
Now the big question, Is there any way of forcing the stream [using a browser] to load HD video and to NOT compress the AUDIO?
I am not aware of a way to set audio quality in a browser. You may search for a Chrome plugin and see if something exists. Another solution is to stream through OBS (free software) so you have more control over the stream quality.
Does pressing the insert button ( at time 1:22) link the live stream buses channel together for stereo or do you have to do that before you start the setting up for the limiter?
You'll have to link them together first by selecting the first bus and navigating to the setup screen, home tab, and then tap "link".
Kind of new at this...what does the limiter effect fader(in this case FX4) do with this setup?
Not sure. I've always reseverd FX 1-4 for reverb and delay and used 5-8 for insert FX like the delay talked about in this video.
@@collabworship Thanks for your response....I watched several videos on effects setup and I found one that had a complete explanation of how insert and side chain effects are setup and function on the X32. I now understand why my question was vague. Your videos are great and I plan to watch many of them. Thanks for doing these videos. I will now be able to do a better job setting up and mixing at our new church.
Do we then have to put that fx channel that we used into the livestream bus?
There's a walkthrough on how to connect the FX to your live stream bus at 1:16
any ideas with a xair like this
Yes, you can do the same thing with the X-Air. It has a limiter plugin very similar to the X32.
Quick question. I’m wanting to add some panning to our livestream without it panning the room. I linked the livestream buses and I see the panning objection and I pan them on there but it didn’t pan on the livestream. Wondering if you can help me.
Make sure you are using two spereate outputs to your live stream computer (one for left, and one for right), and that your live streaming software is set up to receive a stereo connection.
What if we’re using a irig and we plug it into the iPad? Would that make a difference. Cause we don’t use computers for our live stream. And also we’ve created to separate sends on the board but it’s when you listen back to the live stream there not pan on there. And on the routing would we send the livestream bus to the aux in sends on the back of the board that’s where we usely plug in our irig.
@@dariousmarshall2838 I believe the iRig only has one input. A stereo mix requires two inputs. So, to have a stereo live stream mix, you'll need to get an iPad audio interface with two inputs.
What settings would need to change for mono?
Settings would be the same. You'd just be using one of the insert channels on the limiter instead of two.
I’m hoping I can do this on my si performer 2
Were you able to figure it out?
#collaborateworship thanks a lot for the help. Being using the Lim ever since I watched this video but recently I've been having issues with my pastor's mic in the mix ... It distort very bad . Have tried ways I could but to no avail. Could you assist please
One of two things. Either the pastor's gain is set too high, or you are simply sending too much of it to the live stream bus.
@@collabworship I guess I'll to experiment on my pastor's mic then because the Gain is set to 18db and no more .
We have a dedicated mixer for the livestream mix, would this still work the same or should i go a different route?
Yep. Even with a dedicated mixer, a limiter is very helpful for getting the loudness just right.
@@collabworship thank you for the reply, I did this and its way clearer 🙌🏽
@@addison_ge1 Great!
Hey Kade. We ran this today. We had to go +16.5 on the limiter’s input gain to get 3 to 4 db of reduction on the limiter meter. Then I checked the online bus solo’d and we had to drop the bus fader down quite a bit from normal (about -10), otherwise it was clipping the bus. Does that all sound normal?
Hey Chad - The limiter should not cause your bus to clip. Make sure the insert position is set to "post" (see 2:55 of this video).
@@collabworship it was set to post. The online bus pair was fine until I pushed the Solo button to check the online mix, then the Solo meter to the right of the X32 screen was redlining. I dropped the bus level and got the meter to settle down. Thoughts? Thanks.
@@chadt5584 Check your settings on the "monitor" screen (tap VIEW in the monitor section on the top right of the X32). You might have it set to add trim when soloing.
@@collabworship thanks Kade, I will check that. Speaking of the Monitor section, do you set Signal Source to LR PFL? And do you check any of the special boxes? I also haven’t figured out the difference between the “LR Bus” and “LR PFL” tap location options in the Signal Source selection. Thanks so much.
@@chadt5584 Set the source to LR AFL so that if nothing is SOLO'd, the monitor will default to the main mix.
And also what level should I set my live strim fader ?
Generally, the live stream fader should be at 0.
@@collabworship really appreciate your support.. but I play less than unity level... My master gain for the broadcast mix is set always at -20db . Anything higher than that will distort really bad . I don't know if it is as a result of the soundcard that receives from my board before sending onto the desktop for the live stream......
A quick question though. Do you send the signal directly from your FOH to the Desktop/laptop you use for your broadcast?
@@immanueltetteh6232 Yes, I send sound directly to the live stream computer using a Scarlet 2i2 audio interface.
Hey @@collabworship Just curious, why would one use a dedicated audio interface like the Scarlet 2i2 when one can directly send the output through Card Out?
@@enshuti You can definitely use the built-in USB audio interface (CARD) on the X32. The benefit to using an external is if you are unable to route your live stream mix to channels 1&2 on the CARD out tab (e.g. if you are also recording all 32 tracks for virtual sound check or DAW mix later on).
What options do you suggest for limiter setup if you’re using a A&H Avantis, with the dPack? I was looking at the library of limiters available, but I’m wondering if an OBS-based limiter is a better option?
Hey Justin - Not sure on this. I've not used the Avantis mixer. I'd experiment with what you have and then compare it to OBS to see what gets you the better result.
We have an A&H GLD-80, which has even fewer options. Still, I am going to try a stock Manual Peak compressor with a ratio >10:1 and the attack and release settings recommended here. I’m not sure whether our lack of a Squeeze function is a serious omission.
Hello ! Do I leave the bus sends on custom ? 2:55
Mine is on custom because I have some channels set to "pre-fader" but most on "post-fader". If you wanted them all to be post-fader, you can change it from custom to post-fader.
I have set this up and once I insert the limiter into my live stream bus it also effects the foh speakers and stage monitors. I’m sure it’s a routing issue but can’t seem to figure it out. Any ideas?
Hey Daniel - Save a scene to a flash drive and then email it to me (kade at collaborateworship.com). This will enable me to see your setup and diagnose what went wrong. Thanks!
@@collabworship sent!!! Thank You
Jesus Christ is the son of God who died and rose three days later and loves all of you. He died for everyone and wants you with Him, to know Him and live for His glory. Come be saved eternally and spend time with Him to know Him. Be saved, free, forgiven, healed, delivered, baptized, whole and let Him show you how He is everything you need.
🕊️💕Live righteous and Holy because He said to and paid for our way to live like Him. Ask anything in His name and the Father will do it amen hallelujah praise God thank you Jesus . 🙏
I lift up everyone's prayers, wants and needs to You Jesus, please pour out blessings. May Your favor, grace and mercy be upon the world. In Jesus name come help us all. You know our needs and everything else about each of us. In Jesus name amen thank you Jesus praise God 🙏
Jesus, Help people to be rooted and grounded in Your love and to obey Your truth. That they are living in the truth being taught by You. That they know Your voice and word. Knowing truth from errors, discernment. 💕
We are ambassadors of Christ. We represent God, when we are seen Jesus should be seen, His ways not ours. We should be living for and showing God, living for His glory. We are to be an example of Jesus for the world to see Him and want to know Him and know Him more. 🙏 🔥
2 Chronicles 7:14 says, if My people humble themselves and pray and seek My face and turn from their wicked ways I will hear them from heaven and heal their land. 🙏 💖
People need to turn from their wicked ways, Jesus paid for it. That's God stating it in that verse and there are more verses. People need to repent, to be cleansed by His blood and live Holy because He's Holy and righteous because He's righteous. Our God said to stop sinning in many many scriptures and He paid for everyone to be cleansed of sin (Isaiah 53), and to live how He said. He dwells in the Holy temple (your body) and said not to defile the temple. He said to defile the temple is death. He's always serious about everything He said to do. He's just as serious about what He said not to do. We live in obedience to His law, every word if it! He dwells within us all to be with and lead us in His ways. 💕🙏🔥 🕊️
Deuteronomy 28 there are blessings for obedience and curses for disobedience. The whole chapter, and verse 46 is one example of generational curses. These go into the following generations, the 3 and 4th. Our children pay the price for our sin. Stop sinning you are sending consequences to yourself and to your loved ones, children. By God's law you are. If you don't believe me ask Him, in Jesus name may you see and know the truth in it's fullness.
Love your neighbor as you love yourself.
Jesus is worthy of everything He said and paid for, so I implore you to do as God said.
Jesus said If you love me you will obey my commands. Love Him with all your heart, mind, soul and strength. 💖🔥🕊️🙏
Praise God Hallelujah Jesus🙏💖
In Jesus powerful name🙏🔥🕊️ 💖
Cheat sheet is a signup scam....what the crap? All links require personal information to get the supplied help. Damn shame you aren't just helpful and are using the church and other people's issues to turn a profit by collecting and selling email addresses.
We're not selling any info. We just send more helpful resources (which you can immediately opt out of).